{"product_id":"10gbps-poe-injector-60w-ieee802-3bt-at-af-compliant-1g-poe-adapter","title":"10Gbps PoE++ Injector 60W IEEE802.3bt\/at\/af Compliant - 1G PoE Adapter","description":"\u003cp\u003eIn this review of the 10Gbps PoE++ Injector 60W EN60GB-10, the bottom line is simple: it is a straightforward way to add reliable Power over Ethernet to cameras and access points without replacing an existing switch. The reviewer found it most useful where a nonPoE switch or distant device needs stable power over a single Cat5e\/Cat6 run. Setup is plug and play, the unit supplies up to 60W following IEEE802.3bt\/at\/af standards, and the long range capability (100 meters \/ 328 ft) is the single biggest reason to consider it for site deployments that lack nearby power outlets.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePoE conversion:\u003c\/strong\u003e Converts a nonPoE Ethernet port to a PoE output so cameras or APs can be installed without changing the existing switch.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIEEE compliance:\u003c\/strong\u003e Supplies power in accordance with IEEE802.3bt\/at\/af so it works with a wide range of PoE devices requiring 15.4W, 30W or up to 60W.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSingle cable power and data:\u003c\/strong\u003e Sends both power and gigabit data down one Cat5e or Cat6 cable, simplifying installation and cabling runs up to 328 ft.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eGigabit ports:\u003c\/strong\u003e One Gigabit Ethernet input and one Gigabit output support 10\/100\/1000Mbps to avoid a network bottleneck when adding PoE to devices.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eProtection features:\u003c\/strong\u003e Builtin safeguards protect the output against over voltage, over current and short circuits for safer deployments.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePlug and play:\u003c\/strong\u003e No software or configuration required, making it quick to deploy in camera or access point rollouts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis injector is aimed at network installers, IT staff and small business owners who need to power remote IP cameras, wireless access points or other PoE devices where there is no power outlet. It is especially useful when an existing nonPoE switch must remain in place and running.\u003c\/p\u003e\n\u003cp\u003eThose who should look elsewhere include networks that require managed PoE switching with perport control, monitoring, or Power over Ethernet++ features built into a switch chassis. If centralized power management or rackmount consolidation is required, a dedicated PoE switch is a better fit.\u003c\/p\u003e\n\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eEasy conversion of a nonPoE port to provide up to 60W, enabling higherpower devices at the edge.\u003c\/li\u003e\n \u003cli\u003eMaintains full Gigabit throughput so device performance is not compromised when adding power.\u003c\/li\u003e\n \u003cli\u003eLong reach over Cat5e\/Cat6 cables to 100 meters (328 ft) makes placement flexible for cameras and APs.\u003c\/li\u003e\n \u003cli\u003eBuiltin protection reduces risk to connected equipment from electrical faults.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eSingle injector units do not provide centralized management or multiple powered ports, so multiple injectors are needed for multidevice sites.\u003c\/li\u003e\n \u003cli\u003eThe product description focuses on basic operation; advanced power scheduling or port analytics are not supported.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEN60GB-10\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePoE Standard\u003c\/td\u003e\n\u003ctd\u003eIEEE802.3bt\/at\/af compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMaximum Power\u003c\/td\u003e\n\u003ctd\u003e60W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eData Ports\u003c\/td\u003e\n\u003ctd\u003e1 Gigabit input + 1 Gigabit output (10\/100\/1000Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutput Voltage\u003c\/td\u003e\n\u003ctd\u003e48V\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMaximum Cable Distance\u003c\/td\u003e\n\u003ctd\u003e100 meters (328 ft) over Cat5e\/Cat6\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eProtections\u003c\/td\u003e\n\u003ctd\u003eOver voltage, over current, short circuit protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe EN60GB-10 PoE++ injector is a practical and costeffective choice for adding \u003cstrong\u003ePoE\u003c\/strong\u003e to cameras and access points without replacing an existing switch. It delivers up to 60W, preserves Gigabit speeds and supports runs to 328 ft, making it good value for site installers and small IT teams who need reliable, simple deployments rather than centralized management.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this injector power devices that need 60W?\u003c\/strong\u003e\u003cbr\u003eYes, the injector supports IEEE802.3bt and can supply up to 60W to compatible powered devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it affect network speed?\u003c\/strong\u003e\u003cbr\u003eNo, the unit uses Gigabit ports and supports 10\/100\/1000Mbps so the network throughput is preserved.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow far can power be delivered over Ethernet?\u003c\/strong\u003e\u003cbr\u003ePower and data can be carried up to 100 meters (328 ft) over standard Cat5e or Cat6 cable.\u003c\/p\u003e","brand":"PROCET PoE System","offers":[{"title":"Default Title","offer_id":48257307181275,"sku":"B0BZV8124K","price":49.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51gz9f2sXIL._AC_SL1500.jpg?v=1778348403","url":"https:\/\/gearmusthave.com\/products\/10gbps-poe-injector-60w-ieee802-3bt-at-af-compliant-1g-poe-adapter","provider":"GearMustHave","version":"1.0","type":"link"}