{"product_id":"2-25ft-custom-exhaust-kit-universal-mild-steel-16-gauge-tubing","title":"2.25ft Custom Exhaust Kit Universal Mild Steel 16 Gauge Tubing","description":"\u003cp\u003eIn this review the 2.25' Custom Exhaust Kit is evaluated as a practical, budget-friendly option for builders and DIY mechanics who need a straightforward way to route or extend an exhaust system. The single biggest reason to consider this kit is its combination of simple slip-fit assembly and consistent mandrel bends, which make it easy to mock up and weld custom runs without hunting for rare specialty pieces. This kit is especially suited to anyone wanting a durable, serviceable mild steel solution rather than a polished stainless show part.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMandrel bends:\u003c\/strong\u003e Computerized mandrel-bends hold diameter through curves so exhaust gases flow smoothly and fittings align predictably during installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16-gauge tubing:\u003c\/strong\u003e The 16-gauge walls provide a good balance of strength and weldability for custom work and general road use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlip-fit ends:\u003c\/strong\u003e Each tube is expanded on one end to allow easy slip-fit installation, reducing the need for adapters while welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComprehensive pack:\u003c\/strong\u003e The set includes straight pipes and a variety of bends (48' straights, 90, 45 and 180 degree U-bends) to route exhaust in many configurations without extra parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMild steel construction:\u003c\/strong\u003e A natural, pre-oiled finish offers basic corrosion resistance and is easy to prep for welding or coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis kit is aimed at hobbyists, garage fabricators and professional mechanics who need a universal set of pipes to build or adapt exhaust systems on cars, trucks and custom projects. The included bends and slip-fit design make it useful for routing dual or single exhausts where exact factory fittings are not required.\u003c\/p\u003e\n\u003cp\u003ePeople who need a long-term, rust-free cosmetic solution or who prefer stainless steel should look elsewhere; this kit is mild steel and best used where cost, ease of welding and structural fit are the priority rather than finished appearance or maximum corrosion protection.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGood value for money with a broad selection of bends and straights for flexible routing.\u003c\/li\u003e\n\u003cli\u003eEasy to weld and work with thanks to 16-gauge mild steel and pre-oiled finish.\u003c\/li\u003e\n\u003cli\u003eMandrel-bent sections maintain an even bore through curves for predictable flow and fit.\u003c\/li\u003e\n\u003cli\u003eSlip-fit expanded ends simplify alignment during mockup and welding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAs mild steel, it will require coating or painting over time for long-term corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe diameter\u003c\/td\u003e\n\u003ctd\u003e2.25' (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eMild steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall thickness\u003c\/td\u003e\n\u003ctd\u003e16 gauge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack contents\u003c\/td\u003e\n\u003ctd\u003e4 x 48' straight, 4 x 90 degree, 4 x 45 degree, 4 x 180 degree U-bends (16 pieces, 2 packs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd type\u003c\/td\u003e\n\u003ctd\u003eOne end expanded for slip-fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eNatural, pre-oiled to resist rust in transit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe 2.25' Custom Exhaust Kit is a practical, cost-effective choice for anyone building or repairing exhaust systems where ease of fit and welding matter most. Its mandrel bends, 16-gauge walls and slip-fit ends make mockup and fabrication straightforward; just plan to treat or coat the mild steel for long-term corrosion protection. For mechanics and DIY fabricators focused on function and value, this kit is a sensible buy.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this kit ready to weld?\u003c\/strong\u003e\u003cbr\u003eThe tubes are mild steel with a pre-oiled finish; wipe and degrease before welding for best results.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these pieces fit common exhaust clamps?\u003c\/strong\u003e\u003cbr\u003eThe expanded slip-fit ends allow standard slip-on assembly and welding; clamps designed for 2.25' tubing will work for temporary holds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan this kit be used for dual exhausts?\u003c\/strong\u003e\u003cbr\u003eYes, customers report the variety of bends and straights makes routing dual systems straightforward when planned properly.\u003c\/p\u003e","brand":"YOLANDO","offers":[{"title":"Default Title","offer_id":48254466687195,"sku":"B088D2P1DZ","price":137.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71kzQkEUMEL._AC_SL1500_cf582a11-47d5-4eca-9aa2-27dae85ad742.jpg?v=1778269792","url":"https:\/\/gearmusthave.com\/products\/2-25ft-custom-exhaust-kit-universal-mild-steel-16-gauge-tubing","provider":"GearMustHave","version":"1.0","type":"link"}