{"product_id":"2-5mm-to-4pin-dash-cam-cable-6m-rear-camera-extension-for-carplay","title":"2.5mm to 4Pin Dash Cam Cable 6M - Rear Camera Extension for Carplay","description":"\u003cp\u003eIn this review the reviewer tested the 2.5mm to 4Pin Dash Cam Cable (6M) as a practical solution for extending a rear view camera feed to a dash cam or Carplay screen. The bottom line: this cable is for drivers who need a reliable, plug-and-play extension between a rear backup camera and an in-dash recorder or monitor, with the single biggest reason to buy being its long 6 m (19.68 ft) reach combined with a clear wiring layout that includes a dedicated reversing trigger line.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e The 6 m (19.68 ft) cable provides ample reach for most sedans, SUVs, and trucks without needing splices or additional joins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector conversion:\u003c\/strong\u003e The 2.5 mm to 4Pin conversion lets older 2.5 mm dash cam setups connect to newer 4Pin camera inputs for a straightforward extension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReversing trigger:\u003c\/strong\u003e The red wire serves as a reversing trigger line so the monitor can detect reverse gear and switch the display automatically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower handling:\u003c\/strong\u003e Rated for DC12V operation and clear guidance to install a DC 24V to 12V step down converter when needed protects equipment in vehicles with 24V systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo support:\u003c\/strong\u003e Compatible with AHD 1080P and 720P vehicle backup cameras, supporting high-definition backup video over the run.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThis cable is best for DIY installers and professional fitters who need a tidy, long reach extension between a rear view camera and a dash cam or Carplay screen without running multiple smaller cables. It suits owners replacing a damaged in-line cable or extending an existing camera where the original connectors do not match.\u003c\/p\u003e\u003cp\u003eNot every buyer needs this specific converter style; if a vehicle already uses the same connector type end-to-end or requires integrated power conversion, shoppers should consider matched harnesses or a prewired camera kit instead.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLong 6 m length removes the need for joins in most vehicles and keeps the install neater.\u003c\/li\u003e\n\u003cli\u003eClear red reversing trigger wire simplifies integration with displays that accept a reverse input.\u003c\/li\u003e\n\u003cli\u003eSupports AHD 1080P and 720P cameras for usable image quality on compatible monitors.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eRequires a DC 24V to 12V step down converter when used in 24V vehicle systems, adding extra cost and installation steps.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable type\u003c\/td\u003e\n\u003ctd\u003e2.5 mm to 4Pin extension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e6 m (19.68 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eDC12V (use step down for 24V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReversing trigger\u003c\/td\u003e\n\u003ctd\u003eRed wire provided\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVideo support\u003c\/td\u003e\n\u003ctd\u003eAHD 1080P and 720P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse case\u003c\/td\u003e\n\u003ctd\u003eRear view camera extension for dash cam\/Carplay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe 2.5mm to 4Pin Dash Cam Cable (6 m) is a sensible, no-nonsense extension for anyone fitting or repairing a rear camera connection where extra reach and a reversing trigger are needed. It offers good value for users who already have DC12V systems and compatible AHD cameras; those with 24V electrical systems should budget for a step down converter and factor in the extra installation effort.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan I use this cable on a 24V truck?\u003c\/strong\u003e\u003cbr\u003eUse a DC 24V to 12V step down converter before connecting the cable to protect the camera and dash equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill this support HD cameras?\u003c\/strong\u003e\u003cbr\u003eYes, it supports AHD 1080P and 720P vehicle backup cameras as specified.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the red wire already wired as a reverse trigger?\u003c\/strong\u003e\u003cbr\u003eYes, the red line functions as the reversing trigger line for automatic display switching.\u003c\/p\u003e","brand":"Epronic","offers":[{"title":"Default Title","offer_id":46776643813595,"sku":"B0D73SHHZT","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51tOXz6dKTL._AC_SL1500.jpg?v=1747766472","url":"https:\/\/gearmusthave.com\/products\/2-5mm-to-4pin-dash-cam-cable-6m-rear-camera-extension-for-carplay","provider":"GearMustHave","version":"1.0","type":"link"}