{"product_id":"2-gauge-awg-500-ft-red-flexible-pure-copper-welding-cable-heavy-duty","title":"2 Gauge AWG 500 Ft Red Flexible Pure Copper Welding Cable - Heavy Duty","description":"\u003cp\u003eIn this review the TEMCo 2 Gauge AWG 500 ft welding cable is presented as a heavy duty, flexible option for DIYers and pros who need reliable DC power runs. The bottom line: it is best for battery, solar, inverter and starter cable tasks where flexibility and pure copper conductivity matter, with the single biggest reason to buy being its combination of annealed OFC copper and a rugged EPDM jacket that stays flexible in cold and resists oil, grease and abrasion.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e205 Max Amps:\u003c\/strong\u003e Provides adequate continuous current capacity for many battery, inverter and welding lead setups up to moderate run lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated to 600 volts:\u003c\/strong\u003e Meets insulation expectations for low-voltage DC systems common in automotive, RV and solar use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e Remains usable from -58F to +221F, so it holds flexibility and mechanical integrity in harsh environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnnealed 30 gauge OFC conductor:\u003c\/strong\u003e Oxygen free copper strands improve conductivity and solderability compared with lower quality copper mixes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged EPDM jacket:\u003c\/strong\u003e The outer sheath resists cuts, tears, abrasion, water, oil and grease for longer service life in engine bays and outdoor installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHighly flexible construction:\u003c\/strong\u003e 624\/30 stranding and a nominal 0.413 in diameter make routing through tight spaces and battery compartments easier.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis cable is aimed at people building or repairing battery banks, solar arrays, inverter installs, car audio runs, winch leads and welding leads where heavy flexibility and copper conductivity are priorities. Installers who need a durable cable that tolerates oil, grease and engine bay heat will appreciate the EPDM jacket and annealed OFC conductor.\u003c\/p\u003e\n\u003cp\u003eIt is less suitable for very long high-amperage welding leads beyond the recommended run where larger gauge cable is required, or for AC mains applications since it is specified for low-voltage DC work up to 600 volts. Those needing thicker insulation types or specialty flameproof certifications should look elsewhere.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent flexibility from dense 624\/30 strand construction makes routing and bending easy.\u003c\/li\u003e\n\u003cli\u003eDurable EPDM jacket resists oil, grease, abrasion and weather for outdoor and engine bay use.\u003c\/li\u003e\n\u003cli\u003ePure annealed OFC copper improves conductivity and longevity compared with cheaper copper mixes.\u003c\/li\u003e\n\u003cli\u003eWide temperature rating keeps the cable usable in extreme cold and heat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e205 amp guideline is practical for runs up to about 50 ft, so longer high-current welding leads may require a larger gauge.\u003c\/li\u003e\n\u003cli\u003eThe single-color red jacket may require extra labeling when used in complex multi-conductor installations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eGauge\u003c\/td\u003e\n\u003ctd\u003e2 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e500 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eAnnealed 30 gauge OFC, 624\/30 stranding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal OD\u003c\/td\u003e\n\u003ctd\u003e0.413 in (10.49 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage rating\u003c\/td\u003e\n\u003ctd\u003eUp to 600 volts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-58F to +221F (-50C to +105C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe TEMCo 2 gauge 500 ft welding cable is a solid, value-focused choice for battery, solar, RV and moderate welding applications where flexibility and durability are required. Its annealed OFC conductor and tough EPDM jacket give reliable conductivity and long service life, making it a sensible buy for installers and hobbyists who need heavy duty DC cable without excessive cost.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this cable be used for solar and battery banks?\u003c\/strong\u003e\u003cbr\u003eYes; the cable is suitable for solar, battery and inverter DC systems and is rated to 600 volts with a durable jacket for outdoor use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow flexible is the cable in cold weather?\u003c\/strong\u003e\u003cbr\u003eThe EPDM jacket and fine 624\/30 stranding keep the cable flexible down to -58F, making it practical for cold-climate installations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable safe for engine bay use?\u003c\/strong\u003e\u003cbr\u003eYes; customers report the jacket holds up well to engine bay heat, oil and grease, but always secure and protect terminations from abrasion and heat sources.\u003c\/p\u003e","brand":"TEMCo Industrial","offers":[{"title":"Default Title","offer_id":48189672849627,"sku":"B00LIB4H9A","price":1383.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71z0smDmGBL._AC_SL1500_2c963d79-96a6-4fcc-93b1-e1c5984c02ab.jpg?v=1769620839","url":"https:\/\/gearmusthave.com\/products\/2-gauge-awg-500-ft-red-flexible-pure-copper-welding-cable-heavy-duty","provider":"GearMustHave","version":"1.0","type":"link"}