{"product_id":"2024-official-creality-space-pi-filament-dryer-plus-fast-2-spool","title":"2024 Official CREALITY Space Pi Filament Dryer Plus - Fast 2-Spool","description":"\u003cp\u003eOur review of the 2024 Official CREALITY Space Pi Filament Dryer Plus finds it best suited for hobbyists and small workshops that need dependable, simultaneous drying for two spools. The biggest reason to buy is its dual PTC heating design with a 360 degree hot-air circulation system, which produces noticeably more uniform drying than many pad-based dryers. Setup is straightforward, the 4.0 in touch screen makes settings easy to read and change, and the one-key presets for up to 12 filament types take the guesswork out of temperature selection.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Rolls Capacity:\u003c\/strong\u003e Holds two 1 kg spools and routes filament through four outlet holes so two printers or multiple filament types can be dried at once.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble PTC 360 Heating:\u003c\/strong\u003e Dual PTC heaters with a built-in fan deliver even hot-air circulation so wet filament dries uniformly without cold spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced PTC Heat Technology:\u003c\/strong\u003e Uses a 110W PTC heater rather than a PI pad, providing more consistent heat, improved longevity, and better energy efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Key Presets for 12 Filaments:\u003c\/strong\u003e Factory presets cover common and composite materials so users can start a drying cycle for PLA, PETG, ABS, TPU and more with a single tap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 in LCD Touch Screen:\u003c\/strong\u003e A responsive touch display shows current conditions and lets users switch between C and F or manually adjust temperatures from 45C to 70C.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBroad Compatibility:\u003c\/strong\u003e Designed for 1.75 mm and 2.85 mm filaments and compatible with most FDM filament brands, including high-performance composites.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe Space Pi Filament Dryer Plus is ideal for desktop makers, educators, and small production shops that print frequently and need reliable, repeatable drying for multiple spools. Its ability to dry two rolls and feed two printers simultaneously makes it useful where uptime and consistent extrusion are priorities.\u003c\/p\u003e\n\u003cp\u003eIt is less aimed at single-spool casual users who rarely encounter moisture problems and may prefer a smaller, simpler dehydrator. Users who need industrial-scale drying for many spools at once should consider larger storage solutions instead.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUniform drying thanks to dual PTC 360 hot-air circulation that reduces moisture-related print defects.\u003c\/li\u003e\n\u003cli\u003eConvenient one-key presets for up to 12 filament types, removing temperature guesswork for composites and specialty materials.\u003c\/li\u003e\n\u003cli\u003eTouch screen control and C\/F switching make operation intuitive and quick to adjust mid-cycle.\u003c\/li\u003e\n\u003cli\u003eCapacity for two 1 kg spools and multiple outlet ports supports simultaneous drying and multi-printer setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot intended for very large spool farms; capacity is limited to two spools at a time.\u003c\/li\u003e\n\u003cli\u003eTemperature range tops at 70C, which covers most common filaments but may be limiting for rare high-temperature drying needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eCreality\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eSpace Pi Filament Dryer Plus (2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003e2 spools (two 1 kg rolls)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003eDual PTC 360 hot-air with built-in fan, 110W PTC heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e45C to 70C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControls\u003c\/td\u003e\n\u003ctd\u003e4.0 in LCD touch screen with one-key presets for 12 filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Compatibility\u003c\/td\u003e\n\u003ctd\u003e1.75 mm and 2.85 mm; PLA, PETG, ABS, TPU, PA, PC and composite variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Creality Space Pi Filament Dryer Plus is a practical, well-engineered solution for makers who need consistent drying for two spools and simple operation. Its dual PTC heating and 360 degree circulation deliver reliable results, and the one-key presets reduce setup time for common and composite filaments. For small shops and frequent users, it represents good value by improving print reliability and reducing failed prints due to moisture.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan it dry two spools at once?\u003c\/strong\u003e\u003cbr\u003eYes, the unit holds two 1 kg spools and includes multiple outlet holes so two filaments can be dried simultaneously.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhich filaments are supported?\u003c\/strong\u003e\u003cbr\u003ePresets and manual control support PLA, ABS, PETG, TPU, PP, PA, PC, ASA and carbon-fiber blends among others; compatible with 1.75 mm and 2.85 mm diameters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do you control temperature?\u003c\/strong\u003e\u003cbr\u003eThe 4 in touch screen provides one-key presets for up to 12 filament types and allows manual adjustment between 45C and 70C with an option to switch between C and F.\u003c\/p\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":48178394923227,"sku":"B0D22DW8Y9","price":109.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71r5kgHvj6L._SL1500.jpg?v=1769444971","url":"https:\/\/gearmusthave.com\/products\/2024-official-creality-space-pi-filament-dryer-plus-fast-2-spool","provider":"GearMustHave","version":"1.0","type":"link"}