{"product_id":"28-inch-100lb-gas-struts-shocks-for-heavy-lid-strong-28in-lift","title":"28 inch 100Lb Gas Struts Shocks for Heavy Lid - Strong 28in Lift","description":"\u003cp\u003eIn this review of the 28 in 100Lb gas struts shocks, the bottom line is simple: these lifts are built for heavy lids where reliable, quiet assistance matters. The reviewer finds them most valuable for truck covers, RV beds, basement doors and other DIY heavy lids because the 100 lb force handles weights roughly between 80 and 110 lb while the long 27.95 in extended length provides ample travel. Installation is straightforward and the kit includes ball sockets and mounting hardware, so a single person can replace worn supports or upgrade a heavy hatch without specialty tools.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100Lb force:\u003c\/strong\u003e Provides consistent lift for lids and doors weighing approximately 80 to 110 lb, reducing strain when opening or holding heavy covers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended and compressed lengths:\u003c\/strong\u003e The strut extends to 27.95 in and compresses to 14.84 in, giving a wide operating range for deep tops and tall lids.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10mm ball end fittings:\u003c\/strong\u003e Standard ball stud sockets allow straightforward mounting with the included screws and nuts for a secure fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable steel construction:\u003c\/strong\u003e Built from high quality steel for strong bearing capacity and longevity in demanding automotive and outdoor situations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoiseless operation:\u003c\/strong\u003e Designed to open and close slowly and softly, keeping lids supported without slamming or grinding sounds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncludes accessories:\u003c\/strong\u003e Comes with free screws and nuts and is shipped after a random stretch test to reduce early defects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis product is aimed at vehicle owners, RV owners and DIYers who need a heavy-duty replacement for worn gas supports on truck bed covers, tonneau lids, camper shells, trailer windows, basement trap doors and large cabinet tops. It is especially useful where a quiet, powerful lift is required and where the geometry allows a 27.95 in extended strut to operate effectively.\u003c\/p\u003e\n\u003cp\u003eThose who should look elsewhere include users with very light lids under 50 lb, or installs that require shorter struts or different end fittings than the supplied 10 mm ball stud sockets. Also consider a different force rating if your lid is outside the 80-110 lb range or if you need adjustable damping features.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh lift capacity ideal for heavy truck covers and RV compartments.\u003c\/li\u003e\n\u003cli\u003eEasy single-person installation with included ball sockets, screws and nuts.\u003c\/li\u003e\n\u003cli\u003eQuiet, controlled motion that prevents slamming and holds lids open reliably.\u003c\/li\u003e\n\u003cli\u003eRobust steel construction for demanding outdoor and automotive use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForce is fixed at 100Lb so it is not suitable for much lighter lids or where finer adjustment is needed.\u003c\/li\u003e\n\u003cli\u003e10 mm ball end fitting may require different brackets on some legacy applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003e100 Lb (445 N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Length\u003c\/td\u003e\n\u003ctd\u003e27.95 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressed Length\u003c\/td\u003e\n\u003ctd\u003e14.84 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnd Fitting\u003c\/td\u003e\n\u003ctd\u003e10 mm ball stud sockets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eHigh quality steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n\u003ctd\u003eScrews and nuts (ball sockets)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Application Weight\u003c\/td\u003e\n\u003ctd\u003eSuitable for lids 80 - 110 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe 28 in 100Lb gas struts are a solid, value-minded choice for anyone replacing supports on heavy lids such as truck covers, RV beds and basement hatches. They deliver strong, quiet lifting, include necessary mounting hardware and are built from durable steel, making them a practical upgrade when the geometry and 10 mm ball ends match the application.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan these struts handle a camper shell or heavy tonneau?\u003c\/strong\u003e\u003cbr\u003eYes, the 100Lb force is intended for heavy camper shells and tonneau covers in the 80-110 lb range when mounted with appropriate brackets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre mounting accessories included?\u003c\/strong\u003e\u003cbr\u003eYes, the package includes ball socket hardware plus screws and nuts to simplify installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need special tools to install them?\u003c\/strong\u003e\u003cbr\u003eNo special tools are required; a flat screwdriver and basic hand tools are usually enough for a single-person installation following recommended mounting positions.\u003c\/p\u003e","brand":"FilFom","offers":[{"title":"Default Title","offer_id":48189624910043,"sku":"B0D7VSH36B","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/41SrNg5sZYL._AC.jpg?v=1769491350","url":"https:\/\/gearmusthave.com\/products\/28-inch-100lb-gas-struts-shocks-for-heavy-lid-strong-28in-lift","provider":"GearMustHave","version":"1.0","type":"link"}