{"product_id":"36-inch-35-lbs-gas-struts-2-pack-lift-support-for-rv-beds-hatches","title":"36 inch 35 lbs Gas Struts 2 Pack - Lift Support for RV Beds \u0026 Hatches","description":"\u003cp\u003eIn this review of the 36 inch 35 lbs gas struts two pack, the bottom line is simple: these lift supports are a practical upgrade for anyone who needs predictable, one-handed opening of RV beds, storage lids or hatch doors. The reviewer found the pair delivers consistent 35 lb (156 N) push force and a 36 in extended length that replaces old, worn shocks without fuss. Installation took only minutes in most cases and the set includes brackets and nuts, so it is a straightforward swap for common automotive and RV lift support needs.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 lb Lift Capacity:\u003c\/strong\u003e Each gas strut supplies 156 N of force, enough to lift and hold lids and bed platforms rated around 30-39 lbs without extra props.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e36 in Extended Length:\u003c\/strong\u003e The long 36 in extended and 20.08 in compressed lengths give ample travel for deep RV storage compartments and larger hatch doors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Pack with Hardware:\u003c\/strong\u003e The package includes two gas struts plus four brackets and four nuts so both sides of a lid can be replaced at once for balanced support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick Installation:\u003c\/strong\u003e Most replacements took about five minutes per strut using a screwdriver to remove old clips, and the new shocks snap into the supplied brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability Testing:\u003c\/strong\u003e Each unit is reported to have undergone extensive cycle testing to ensure smooth operation and a longer service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer Support:\u003c\/strong\u003e The product comes with an 18 month replacement support promise to address early failures or fitment problems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis kit is best for RV owners, trailer builders, and DIYers replacing or upgrading lift supports on bed storage platforms, engine covers, or trap doors where a 35 lb assist is appropriate. It works well for anyone who wants a simple swap using basic tools and wants both struts replaced together for balanced operation.\u003c\/p\u003e\n\u003cp\u003eThose who need very heavy-duty or precision gas springs for automotive hoods, very heavy hot tub lids, or applications outside the 30-39 lb effective range should look for a higher-rated or adjustable force strut. Also, buyers who require specialized brackets beyond the included set should confirm compatibility before purchasing.\u003c\/p\u003e\n\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides reliable 35 lb lift capacity that lets lids be opened with one hand in many installations.\u003c\/li\u003e\n\u003cli\u003eIncludes mounting brackets and nuts so both sides can be replaced together for even support.\u003c\/li\u003e\n\u003cli\u003eFast and straightforward installation in most cases, with an online guide for reference.\u003c\/li\u003e\n\u003cli\u003eBacked by durability testing and an 18 month replacement policy for extra confidence.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSome customers report the supplied brackets feel lightweight and may not suit heavy or unusual mounting setups.\u003c\/li\u003e\n\u003cli\u003eInstructions were reported as unclear by a few users, which can make first-time installs slower.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended length\u003c\/td\u003e\n\u003ctd\u003e36 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressed length\u003c\/td\u003e\n\u003ctd\u003e20.08 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForce\u003c\/td\u003e\n\u003ctd\u003e35 lb (156 N)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e2 gas struts with hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded hardware\u003c\/td\u003e\n\u003ctd\u003e4 brackets, 4 nuts, installation guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment range\u003c\/td\u003e\n\u003ctd\u003eRecommended for 30-39 lb lids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003e18 month replacement support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThese 36 in 35 lb gas struts are a practical, cost-effective solution for RV beds, storage lids and hatch doors that fall within the 30-39 lb range. They deliver dependable lift, include the basic mounting hardware, and install quickly; buyers should only check bracket strength and fit before fitting nonstandard lids. Overall, they represent good value for routine replacement jobs and light to medium DIY applications.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my RV bed?\u003c\/strong\u003e\u003cbr\u003eThey fit many RV bed storage lids if the lid weight is near 30-39 lb and you have room for a 36 in extended strut; verify mounting points and travel before purchase.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the struts be compressed manually before installation?\u003c\/strong\u003e\u003cbr\u003eNo, the manufacturer advises not to compress the struts manually prior to installation to avoid damage or safety risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat tools are needed to install?\u003c\/strong\u003e\u003cbr\u003eInstallation typically requires only a screwdriver to remove old clips and to snap the new struts onto the supplied brackets; more complex mounts may need basic wrenches.\u003c\/p\u003e","brand":"PAMAGOO","offers":[{"title":"Default Title","offer_id":48227227271387,"sku":"B0DQ9LXGDP","price":58.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51ks-Ag2hZL._SL1500_2cac076f-c064-4ddf-884a-f7faa79e4a7c.jpg?v=1770808584","url":"https:\/\/gearmusthave.com\/products\/36-inch-35-lbs-gas-struts-2-pack-lift-support-for-rv-beds-hatches","provider":"GearMustHave","version":"1.0","type":"link"}