{"product_id":"4-pin-power-cable-for-simrad-go-nss-evo3-vulcan-zeus3-2m","title":"4-Pin Power Cable for Simrad GO NSS evo3 Vulcan Zeus3 - 2m","description":"\u003cp\u003eIn this review the 4-Pin Power Cable (000-00128-001) is examined for boaters who need a direct, OEM-style replacement or a simple wiring extension for Simrad displays. The bottom line: this cable is for owners of GO, NSS evo3, Vulcan and Zeus3 units who want a reliable, ready-to-install connection that carries 12V or 24V power plus control and alarm signals. Installation is straightforward thanks to the molded connector and four color-coded bare leads, and the cable's 2m length is long enough for most dash-to-power runs without excess clutter.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal 4-Pin Connector:\u003c\/strong\u003e The molded 4-pin plug provides a secure, OEM-style connection to compatible Simrad displays so you get consistent power and signal contact.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour Bare Wire Leads:\u003c\/strong\u003e Color-coded bare wires let installers tie power, control bus, and alarm circuits directly into the boat's wiring harness without adapters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Control Bus Connection:\u003c\/strong\u003e The control bus lead enables synchronized power-up of connected modules so radar or sonar can follow the main display when it turns on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Alarm Integration:\u003c\/strong\u003e A dedicated alarm lead allows hooking a buzzer or external alert to notify of shallow water or fish finder events.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Standard Replacement:\u003c\/strong\u003e The cable is sized and built to replace worn factory wiring, reducing the need for custom splicing or fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2m Length:\u003c\/strong\u003e At roughly 6.5 ft the cable is long enough for most dash installations while remaining easy to route and secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis cable is ideal for boat owners maintaining or upgrading chartplotters from the GO, NSS evo3, Vulcan and Zeus3 families who want a straightforward, factory-style connection. Marine technicians and DIY installers who prefer a molded connector with bare leads for direct wiring will find it especially useful.\u003c\/p\u003e\n\u003cp\u003eIt is not aimed at users who need a complete harness with fused distribution, in-line fuses, or prefabricated alarm modules; those looking for a full wiring conversion kit or very short pigtail replacements should consider other wiring options.\u003c\/p\u003e\n\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect molded connector matches Simrad display inputs for a secure fit and consistent electrical contact.\u003c\/li\u003e\n\u003cli\u003eFour color-coded bare leads simplify integration with power, control bus, and external alarm circuits.\u003c\/li\u003e\n\u003cli\u003eControl bus support enables automatic powering of connected modules for convenient system behavior.\u003c\/li\u003e\n\u003cli\u003eReasonable 2m length fits most installations without excessive slack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupplies bare wire ends rather than terminalized connectors, so end users must crimp or solder to their harness.\u003c\/li\u003e\n\u003cli\u003eNo fuse or inline protection included, so installers must ensure proper circuit protection separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable type\u003c\/td\u003e\n\u003ctd\u003e4-pin power cable with bare wire output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible units\u003c\/td\u003e\n\u003ctd\u003eSimrad GO, NSS evo3, Vulcan, Zeus3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e2 m (6.5 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eMolded 4-pin connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeads\u003c\/td\u003e\n\u003ctd\u003eFour color-coded bare wire leads (power, control bus, alarm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e12V or 24V power delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe 4-Pin Power Cable is a practical, cost-effective replacement for worn factory wiring and a convenient option for installers who need a direct connection to Simrad displays. It offers reliable connectors, control bus and alarm wiring in a ready-to-route 2m length; buyers should plan to add proper fusing and terminalized ends during installation. For anyone maintaining GO, NSS evo3, Vulcan or Zeus3 systems this cable delivers good value and straightforward functionality.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill this cable fit my Simrad display?\u003c\/strong\u003e\u003cbr\u003eYes, it is designed for GO, NSS evo3, Vulcan and Zeus3 displays that accept a molded 4-pin power connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable include fuses or terminals?\u003c\/strong\u003e\u003cbr\u003eNo, the cable provides bare wire leads and does not include inline fuses or terminal lugs; installers should add appropriate protection and terminations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this with 12V and 24V systems?\u003c\/strong\u003e\u003cbr\u003eYes, the cable carries either 12V or 24V power as required by the boat's power management system.\u003c\/p\u003e","brand":"Bzcovac","offers":[{"title":"Default Title","offer_id":48179911819483,"sku":"B0F48L8W44","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61S-zt5hVIL._AC_SL1500.jpg?v=1769610037","url":"https:\/\/gearmusthave.com\/products\/4-pin-power-cable-for-simrad-go-nss-evo3-vulcan-zeus3-2m","provider":"GearMustHave","version":"1.0","type":"link"}