{"product_id":"arris-4pcs-22mm-x-400mm-glossy-carbon-fiber-tubes-lightweight","title":"ARRIS 4PCS 22mm x 400mm Glossy Carbon Fiber Tubes - Lightweight","description":"\u003cp\u003eIn this review the ARRIS 4PCS 400mm carbon fiber tubes are examined for hobbyists and builders who need lightweight, stiff tubing for quadcopters and custom frames. The package of four plain glossy tubes stands out for its combination of very low weight and high tensile strength compared with common metal alternatives, making it a practical choice for multirotor arms and structural members where weight savings matter most. The review focuses on fit, finish, dimensional accuracy and real-world suitability.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter and inner diameters:\u003c\/strong\u003e The 22mm outer and 20mm inner diameters provide a snug fit for many motor mounts and sleeve adapters used on multirotors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsistent length:\u003c\/strong\u003e Each tube is 400mm long, which is convenient for building arms for up to medium-size multirotors without additional cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThin wall construction:\u003c\/strong\u003e The 1mm wall thickness keeps weight to a minimum while retaining good bending resistance for typical flight loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGlossy surface finish:\u003c\/strong\u003e The plain glossy surface gives a clean appearance and makes it easy to inspect for defects or damage during assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion and fatigue resistance:\u003c\/strong\u003e Being carbon fiber, the tubes resist corrosion and water and maintain strength under repeated loading better than many metals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThis set is aimed at drone builders, model makers and engineers who need reliable, lightweight tubing for structural elements, especially in multirotor frames where reducing mass improves flight time and responsiveness. The tubes work well for custom arms, boom extensions and experimental rigs where standard metal tubes would add unnecessary weight.\u003c\/p\u003e\u003cp\u003eThose who need precise, certified aerospace tubing or integrated fittings should look elsewhere; the tubes are hand-measured so small dimensional variation can occur, and they arrive as plain tubes without pre-drilled mounts or end fittings.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh strength-to-weight ratio that outperforms common aluminum alternatives in weight-sensitive builds.\u003c\/li\u003e\n\u003cli\u003eClean glossy finish and good surface quality reported by users, making final assemblies look neat.\u003c\/li\u003e\n\u003cli\u003eResistant to corrosion, water, heat and fatigue, so they hold up in outdoor use better than untreated metals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSmall dimensional variation is possible due to manual measurement, and a few users report tubes slightly undersized in diameter.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eARRIS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e20mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e400mm (15.75in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Thickness\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Contents\u003c\/td\u003e\n\u003ctd\u003e4 PCS plain glossy carbon fiber tubes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe ARRIS 22mm x 400mm glossy carbon fiber tubes are a sensible, cost-effective choice for builders who prioritize weight reduction and stiffness in multirotor arms and custom frames. They deliver strong, lightweight performance and a polished finish, making them good value for hobbyists and experimental projects, provided buyers accept minor dimensional variance and supply their own fittings.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAre these tubes ready to mount motors?\u003c\/strong\u003e\u003cbr\u003eThey arrive as plain tubes without end fittings or motor mounts, so motor mounting requires separate adapters or drilled\/3D-printed collars.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow precise are the diameters?\u003c\/strong\u003e\u003cbr\u003eDiameters are hand-measured and generally accurate, but buyers may see a deviation of about +\/- 0.1mm; some customers reported slightly undersized tubes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan they be used outdoors?\u003c\/strong\u003e\u003cbr\u003eYes; the carbon fiber material resists corrosion, water and fatigue and is suitable for outdoor multirotor use when properly sealed and mounted.\u003c\/p\u003e","brand":"ARRIS","offers":[{"title":"Default Title","offer_id":48186947109083,"sku":"B08ZYMTYNL","price":43.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51PYAReNGfS._SL1000.jpg?v=1769482749","url":"https:\/\/gearmusthave.com\/products\/arris-4pcs-22mm-x-400mm-glossy-carbon-fiber-tubes-lightweight","provider":"GearMustHave","version":"1.0","type":"link"}