{"product_id":"cat6a-keystone-jack-unshielded-90-degree-punch-down-48-pack","title":"Cat6A Keystone Jack Unshielded 90 Degree Punch-Down - 48 Pack","description":"\u003cp\u003eIn this review of the Cat6A Keystone Jack Unshielded 90 Degree Punch-Down 48 Pack, the bottom line is straightforward: these keystone jacks are a practical choice for installers and DIYers who need reliable, component-level rated connectors for 10 Gigabit Ethernet and higher-power PoE. The biggest reason to buy is consistent, tested electrical performance - these jacks are ANSI\/TIA certified, UL listed and tested to 500 MHz, which makes them a dependable part for structured cabling runs up to typical commercial lengths. They arrive as a 48 piece box with IDC caps and clear wiring markings, so termination is fast and repeatable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 Gigabit ready:\u003c\/strong\u003e Component level rated for 10\/100\/1000\/10000 Mb\/s so it supports high-speed runs up to the recommended distance for UTP installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE capable:\u003c\/strong\u003e Supports PoE, PoE+ and PoE++ (IEEE 802.3af\/at\/bt) 4PPoE up to 100W, which helps future-proof power-hungry devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurable 90-degree design:\u003c\/strong\u003e The right-angle body with an IDC retaining cap and tough ABS housing improves cable routing and reduces strain at the termination point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear wiring guides:\u003c\/strong\u003e Highly visible T568A\/T568B color markings make punch-downs quicker and reduce wiring errors on site.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion-resistant contacts:\u003c\/strong\u003e Nickel and tin-coated phosphor bronze prongs plus gold plated RJ45 contacts preserve signal integrity over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack convenience:\u003c\/strong\u003e Comes as a 48 piece box with full instructions and IDC caps, which is useful for small installs or stocking a service van.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThis product suits network installers, small contractors and skilled DIY homeowners who terminate their own keystone jacks and need consistent, lab-tested performance for Cat6A UTP runs. It is especially useful when you want component-rated parts for 10 Gigabit networks and devices that require higher PoE power.\u003c\/p\u003e\u003cp\u003eThose who should look elsewhere include users who require shielded jacks for environments with heavy EMI or users working with stranded patch cords instead of 23-24 AWG solid conductors, since these are designed for solid conductor terminations and standard unshielded wall plates.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eComponent rated and ANSI\/TIA certified, providing repeatable performance for high-speed links.\u003c\/li\u003e\n\u003cli\u003eSupports up to 100W 4PPoE, enabling use with PoE++ devices without modification.\u003c\/li\u003e\n\u003cli\u003eVisible wiring labels and included IDC caps make terminations fast and reduce mistakes.\u003c\/li\u003e\n\u003cli\u003eDurable materials and plated contacts help prevent corrosion and failures in the field.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSome buyers report mixed opinions about value, with a few preferring lower-cost alternatives for basic 1G installs.\u003c\/li\u003e\n\u003cli\u003eNot suitable for shielded cable runs or for use with stranded conductors where punch-down termination is not intended.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eModular RJ45 female keystone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCategory rating\u003c\/td\u003e\n\u003ctd\u003eComponent rated Cat6A, ANSI\/TIA 568.2-D\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency tested\u003c\/td\u003e\n\u003ctd\u003eUp to 500 MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE support\u003c\/td\u003e\n\u003ctd\u003ePoE\/PoE+\/PoE++ (IEEE 802.3af\/at\/bt) 4PPoE up to 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible conductors\u003c\/td\u003e\n\u003ctd\u003e23-24 AWG solid copper, 0.86 - 1.10 mm insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003e90-degree punch-down with IDC retaining cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack quantity\u003c\/td\u003e\n\u003ctd\u003e48 pieces with IDC caps and instructions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThese Cat6A keystone jacks deliver reliable, certified performance for 10 Gigabit UTP installations and high-power PoE devices, making them a sensible choice for professional installers and advanced DIYers. The durable 90-degree housing, clear wiring markings and packed quantity add practical value. If you need shielded parts or cheaper single-piece options for basic 1G work, consider alternatives, but for long-term, tested performance these jacks are a solid investment.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eDo these jacks support 10 Gigabit Ethernet?\u003c\/strong\u003e\u003cbr\u003eYes, they are component level rated for 10\/100\/1000\/10000 Mb\/s and tested to 500 MHz for typical UTP runs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan these be used with PoE++ devices?\u003c\/strong\u003e\u003cbr\u003eYes, the jacks support PoE, PoE+ and PoE++ (4PPoE) up to 100W according to the specifications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat cable types are compatible?\u003c\/strong\u003e\u003cbr\u003eThey are intended for 23-24 AWG solid copper conductors with insulated diameters of about 0.86 to 1.10 mm and are unshielded (UTP) connectors.\u003c\/p\u003e","brand":"TRUE CABLE","offers":[{"title":"Default Title","offer_id":48243040747739,"sku":"B01LDFVZUO","price":83.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61tUonLwCZL._SL1500.jpg?v=1776265966","url":"https:\/\/gearmusthave.com\/products\/cat6a-keystone-jack-unshielded-90-degree-punch-down-48-pack","provider":"GearMustHave","version":"1.0","type":"link"}