{"product_id":"control-cable-for-dji-rs2-rs3-rs4-pro-20m-long-reach-wired-control","title":"Control Cable for DJI RS2 RS3 RS4 Pro 20M - Long Reach Wired Control","description":"\u003cp\u003eIn this review of the Control Cable for DJI RS2 RS3 RS4 Pro, the bottom line is straightforward: this is a purpose-driven 20 m cable for operators who need reliable wired control between the Ronin Tethered Control Handle, expansion adapter and a camera rig. It is best for gimbal technicians, camera assistants and rental houses that require a long, vehicle-grade link to pass control signals and power without relying on wireless range. The reviewer found the cable's length and correct 4+2 to 6-pin connector wiring to be the single biggest reason to choose it when using the Ronin tethered handle and motor follow focus setups.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 m length:\u003c\/strong\u003e Provides a long reach for remote operation on large sets or long dolly runs where wireless is unreliable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4+2 to 6-pin wiring:\u003c\/strong\u003e Matches the Ronin expansion 4+2pin port to the 6-pin control input used by tethered handles and motor follow focus units.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower passthrough capability:\u003c\/strong\u003e Supplies control signals and draws power from the gimbal expansion 4+2pin port so the tethered handle and accessories can operate without a separate battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility with Ronin handles:\u003c\/strong\u003e Designed specifically for the Ronin Tethered Control Handle and Communication Interface Adapter Expansion Port of RS 2, RS3 Pro and RS4 Pro gimbals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePurpose-built connector pair:\u003c\/strong\u003e Uses 4+2 pin male to 6-pin male connectors to maintain correct signal mapping for motor follow focus and shutter control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe cable suits professional camera operators, gimbal technicians and rental houses that need a dependable wired option for focus pulling, camera controls and gimbal movement at long distances. On location shoots with interference, long runs from a crane or when tethered control is preferred for latency and reliability, this cable fills a clear technical need.\u003c\/p\u003e\n\u003cp\u003eCasual users or small crews who only use short handheld setups or who rely exclusively on wireless controllers should look elsewhere, since the 20 m length and pro connector style are overkill for simple, compact rigs.\u003c\/p\u003e\n\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLong 20 m reach removes range anxiety for tethered control on large sets.\u003c\/li\u003e\n\u003cli\u003eCorrect 4+2 to 6-pin configuration ensures compatibility with Ronin tethered control handles and motor follow focus units.\u003c\/li\u003e\n\u003cli\u003ePasses power from the gimbal expansion port so accessories can run without separate batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpecialized connectors and length add bulk and are unnecessary for handheld or short-run setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eControl cable for DJI Ronin tethered control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector A\u003c\/td\u003e\n\u003ctd\u003e4+2 pin male (gimbal expansion port)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector B\u003c\/td\u003e\n\u003ctd\u003e6 pin male (control and power input)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e20 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eDJI RS 2, RS3 Pro, RS4 Pro Ronin Tethered Control Handle and expansion adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower\u003c\/td\u003e\n\u003ctd\u003eDraws power from gimbal 4+2pin expansion 14.4V output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe HangTon Control Cable is a pragmatic choice for professionals who need a long, wired link that reliably carries control signals and power between Ronin tethered handles and follow focus units. It is good value for shoots where wired reliability, correct pin mapping and 20 m reach matter more than compactness.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill this cable power my tethered control handle?\u003c\/strong\u003e\u003cbr\u003eYes, it is designed to draw power from the gimbal expansion 4+2pin port so connected accessories can operate without a separate power source.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this compatible with RS2, RS3 Pro and RS4 Pro?\u003c\/strong\u003e\u003cbr\u003eYes, the cable matches the expansion adapter and tethered control handle ports used by RS2, RS3 Pro and RS4 Pro gimbals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan you make different lengths?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer states custom cables can be made, so shorter or longer runs may be available on request.\u003c\/p\u003e","brand":"HangTon","offers":[{"title":"Default Title","offer_id":48253610361051,"sku":"B0D1CB41HB","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71cFaK9kQeL._AC_SL1500.jpg?v=1778325863","url":"https:\/\/gearmusthave.com\/products\/control-cable-for-dji-rs2-rs3-rs4-pro-20m-long-reach-wired-control","provider":"GearMustHave","version":"1.0","type":"link"}