{"product_id":"craly-10-in-pcd-hardie-fiber-cement-blade-long-life-precision","title":"CRALY 10 in PCD Hardie Fiber Cement Blade - Long-Life Precision","description":"\u003cp\u003eIn this review of the CRALY 10 in 6 Teeth Hardie fiber cement blade, the bottom line is simple: this is a specialist cutting blade for tradespeople and serious DIYers who need long-lasting, clean cuts through fiber cement and other super hard materials. The single biggest reason to buy is its polycrystalline diamond tipped (PCD) teeth, which deliver dramatically longer life than standard carbide blades while the thin kerf and laser-cut stabilizer slots reduce vibration and noise for precise cuts.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003ePCD diamond tipped teeth:\u003c\/strong\u003e provide extreme cutting life so the blade stays sharp much longer when cutting hardie plank, eternit and similar materials.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eThin kerf design:\u003c\/strong\u003e the 2.0 mm kerf reduces material waste and requires less power from your saw for smoother, faster cuts.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eBlack Ice non-stick coating:\u003c\/strong\u003e lowers friction and heat buildup for cleaner edges and longer blade life during extended cutting sessions.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLaser-cut stabilizer slots:\u003c\/strong\u003e minimize noise and vibration to improve cut accuracy and make handling the saw easier on demanding jobs.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eStabilizer vents and diamond knockout:\u003c\/strong\u003e enhance stability and provide easy removal options while keeping the blade running true under load.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe CRALY 10 in PCD blade is aimed at contractors, flooring installers and serious hobbyists who regularly cut fiber cement boards, Corian, MDF and other super hard materials and need a blade that lasts far longer than typical carbide options. Its design favors users who prioritize clean, precise cuts and reduced dust and vibration on the job.\u003c\/p\u003e\n\u003cp\u003eIt is not the best choice for general-purpose woodworking or for users who only occasionally cut soft materials, where a general-purpose blade would be more economical. Casual users with light cutting needs should look for a more affordable multi-purpose blade instead of a specialist PCD hardie blade.\u003c\/p\u003e\n\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eExceptional durability from the \u003cstrong\u003epolycrystalline diamond tipped\u003c\/strong\u003e teeth, giving far longer service life than carbide.\u003c\/li\u003e\n \u003cli\u003eThin kerf and \u003cstrong\u003elaser-cut stabilizer slots\u003c\/strong\u003e reduce vibration and produce cleaner cuts.\u003c\/li\u003e\n \u003cli\u003eBlack Ice non-stick coating cuts down friction and keeps edges clean over extended use.\u003c\/li\u003e\n \u003cli\u003eWorks well across fiber cement and other dense materials with reduced dust levels reported by users.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eSpecialist PCD teeth make it a higher upfront cost compared with standard blades, which may not be cost-effective for occasional users.\u003c\/li\u003e\n \u003cli\u003eWith only six teeth, it is optimized for hard materials and may not deliver the same finish on fine woodworking cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctr\u003e\n\u003ctd\u003eDiameter\u003c\/td\u003e\n\u003ctd\u003e10 in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTeeth\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eArbor\u003c\/td\u003e\n\u003ctd\u003e5\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eKerf\u003c\/td\u003e\n\u003ctd\u003e2.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTip type\u003c\/td\u003e\n\u003ctd\u003ePolycrystalline diamond (PCD)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCoating\u003c\/td\u003e\n\u003ctd\u003eBlack Ice non-stick shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe CRALY 10 in PCD Hardie blade is a worthwhile buy for installers and pros who cut fiber cement and other super hard materials frequently; its PCD teeth and thin kerf deliver long life and accurate cuts that reduce downtime and blade changes. For occasional users who only cut softer materials, a less specialized blade will be more economical, but for its target use this blade represents strong value.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this blade cut fiber cement boards?\u003c\/strong\u003e\u003cbr\u003eYes. It is specifically designed for fiber cement, hardie plank and similar super hard materials using PCD teeth for long life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat arbor size does it fit?\u003c\/strong\u003e\u003cbr\u003eThe blade fits a 5\/8 in arbor common to many circular saws and table saws.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work on MDF and Corian?\u003c\/strong\u003e\u003cbr\u003eYes. The blade is suitable for MDF and Corian as well as hard fiber cement materials, though finish may vary compared with blades made for fine woodworking.\u003c\/p\u003e","brand":"CRALY","offers":[{"title":"Default Title","offer_id":48204216074459,"sku":"B0F52P438X","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61--7mbaGyL._SL1500.jpg?v=1770372331","url":"https:\/\/gearmusthave.com\/products\/craly-10-in-pcd-hardie-fiber-cement-blade-long-life-precision","provider":"GearMustHave","version":"1.0","type":"link"}