{"product_id":"creality-ender-3-s1-3d-printer-dual-gear-direct-drive","title":"Creality Ender 3 S1 3D Printer - Dual-Gear Direct Drive","description":"\u003cp\u003eIn this review of the Creality Ender 3 S1, the bottom line is simple: it is an excellent mid-range FDM printer for hobbyists and makers who want reliable prints of flexible and standard filaments with minimal setup. The most compelling reason to buy is the upgraded \u003cstrong\u003edual-gear direct drive extruder\u003c\/strong\u003e paired with \u003cstrong\u003eCR Touch 16-point auto leveling\u003c\/strong\u003e, which together make printing TPU, PLA and PETG far less fussy than on many entry-level machines. Assembly is straightforward and the removable spring steel print sheet speeds model removal without compromising adhesion.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-Gear Direct Drive Extruder:\u003c\/strong\u003e Two chrome steel gears with a 13.5 gear ratio provide up to 80N pushing force for smooth feeding and strong grip on flexible filaments like TPU.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCR Touch Auto Bed Leveling:\u003c\/strong\u003e 16-point automatic leveling compensates for bed height variation so first-layer adhesion is more consistent and manual shimming is unnecessary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable Spring Steel Print Sheet:\u003c\/strong\u003e A PC-coated spring steel sheet with magnetic base offers good adhesion during printing and easy part removal by bending the sheet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual Z-Axis Precision:\u003c\/strong\u003e Dual Z-screws and dual motors synchronize motion to reduce visible layer artifacts and improve surface finish on taller prints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResume Printing \u0026amp; Filament Sensor:\u003c\/strong\u003e Power-loss resume and filament runout detection save time and material by restarting prints from the last recorded position after interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Pre-Installation Rate:\u003c\/strong\u003e With roughly 96% of the frame pre-assembled, the printer is ready after a short 6-step build process suitable for beginners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe Ender 3 S1 is aimed at hobbyists, makers, and small workshop users who need reliable handling of multiple filament types, including \u003cstrong\u003eTPU and PETG\u003c\/strong\u003e, and prefer minimal manual leveling. Its direct drive extruder and filament sensor make it particularly attractive to those who print flexible materials or run frequent small jobs.\u003c\/p\u003e\n\u003cp\u003eIt is less appropriate for users who require an industrial enclosed build chamber for high-temperature exotic filaments or for those who need a very large build volume; the platform measures about 8.66in by 8.66in with a 10.63in height, so very large prints will require a different model.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth, reliable feeding of flexible and standard filaments thanks to the \u003cstrong\u003edual-gear extruder\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eEasy, consistent first layers from the \u003cstrong\u003eCR Touch 16-point auto leveling\u003c\/strong\u003e system.\u003c\/li\u003e\n\u003cli\u003eConvenient removable PC spring steel plate for strong adhesion and easy part removal.\u003c\/li\u003e\n\u003cli\u003eResume printing and filament runout detection reduce failed prints and material waste.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuild volume is modest, so it may not suit users who need to print very large parts.\u003c\/li\u003e\n\u003cli\u003eOpen-frame design means prints of some high-temp filaments may require an enclosure purchased separately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuild Volume\u003c\/td\u003e\n\u003ctd\u003e8.66in x 8.66in x 10.63in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtruder Type\u003c\/td\u003e\n\u003ctd\u003eDual-gear direct drive (Sprite) with 13.5 gear ratio\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAuto Leveling\u003c\/td\u003e\n\u003ctd\u003eCR Touch 16-point automatic bed leveling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrint Surface\u003c\/td\u003e\n\u003ctd\u003ePC-coated spring steel removable plate with magnetic base\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZ Axis\u003c\/td\u003e\n\u003ctd\u003eDual Z-screws and dual motors for higher precision\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Support\u003c\/td\u003e\n\u003ctd\u003ePLA, TPU, PETG, ABS and similar FDM filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecovery Features\u003c\/td\u003e\n\u003ctd\u003ePower loss resume and filament runout detection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Creality Ender 3 S1 is a strong choice for enthusiasts who want a well-rounded desktop FDM printer that handles flexible filaments and reduces setup friction. With its \u003cstrong\u003edirect drive extruder\u003c\/strong\u003e, dependable auto leveling, and removable spring steel bed, it delivers better out-of-the-box usability than many budget printers while remaining compact and affordable for hobbyist workshops.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan it print flexible filaments like TPU?\u003c\/strong\u003e\u003cbr\u003eYes. The dual-gear direct drive extruder with high pushing force is designed to feed flexible filaments smoothly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs leveling fully automatic?\u003c\/strong\u003e\u003cbr\u003eThe CR Touch performs 16-point automatic leveling to compensate for bed variations, significantly reducing manual leveling needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat happens if power is lost mid-print?\u003c\/strong\u003e\u003cbr\u003eThe printer records position data and supports resume printing so most prints can continue after power recovery or filament replacement.\u003c\/p\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":48175586607323,"sku":"B09JBDTG81","price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51RLQ9fC9oL.__AC_SX300_SY300_QL70_FMwebp.webp?v=1769613249","url":"https:\/\/gearmusthave.com\/products\/creality-ender-3-s1-3d-printer-dual-gear-direct-drive","provider":"GearMustHave","version":"1.0","type":"link"}