{"product_id":"customize-your-fender-strat-diy-poplar-guitar-body-jd-moon","title":"Electric Guitar Body for Strat Style - Poplar SSS Blue","description":"\u003cp\u003eIn this review of the Electric Guitar Body for Strat Style by JD.Moon the bottom line is simple: this is a practical, affordable blank for players who want a ready-to-finish Stratocaster style body with a striking blue gloss finish. The reviewer found it best for DIY builders who already have hardware and pickups on hand and want a lightweight, pre-routed poplar body that saves time on drilling and routing. The single biggest reason to buy is the combination of pre-drilled neck mounting holes and pickup routing, which lets a hobbyist move straight to assembly and setup.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolid poplar construction:\u003c\/strong\u003e The poplar wood keeps the body light at about 4.4 LB while providing a stable blank for finishing or direct use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss polyester finish:\u003c\/strong\u003e The blue gloss coat gives a clean, stage-ready look right out of the box and resists minor dings during assembly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSSS pickup routing:\u003c\/strong\u003e The single\/single\/single routing fits standard Stratocaster single-coil pickups for classic tones without additional routing work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePre-drilled neck and wire path:\u003c\/strong\u003e Neck mounting holes and an internal wire path are drilled already, reducing the setup steps for most Strat-style necks and electronics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeck pocket compatibility:\u003c\/strong\u003e The neck pocket measures about 5.7 cm deep and is suitable for necks around 5.6 cm to 5.7 cm, easing the fit for common Strat-style necks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIY replacement ready:\u003c\/strong\u003e As a replacement body or starting point for a custom build, it accepts common hardware layouts used on Strat-style instruments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe body is aimed at hobbyists, repair techs, and musicians who want to build or refresh a Strat-style guitar without fabricating the body from scratch. Because the major routings and neck holes are already completed, it is especially suitable for builders who have intermediate assembly skills and a set of compatible parts.\u003c\/p\u003e\n\u003cp\u003ePlayers who need a fully finished instrument, custom body contours, or non-standard pickup configurations should look elsewhere, since this product is a pre-shaped poplar blank with SSS routing and no pickguard mounting holes drilled.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight poplar keeps overall instrument weight down while offering a smooth surface for painting or use as-is.\u003c\/li\u003e\n\u003cli\u003eBlue gloss polyester finish provides an attractive aesthetic without immediate refinishing.\u003c\/li\u003e\n\u003cli\u003ePre-drilled neck mounting holes and wire path cut assembly time and reduce the need for specialized routing tools.\u003c\/li\u003e\n\u003cli\u003eSSS routing matches standard Strat single-coil setups for straightforward pickup installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe body does not include pickguard mounting holes, so installing some pickguard styles will require additional drilling or modification.\u003c\/li\u003e\n\u003cli\u003ePoplar is a budget tonewood and may not offer the same resonance or sustain as higher-end woods preferred by some players.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePoplar wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eBlue gloss polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePickup Routing\u003c\/td\u003e\n\u003ctd\u003eSingle\/Single\/Single (SSS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eApprox. 4.4 LB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eApprox. 45 x 32 x 4 cm (17.72 x 12.59 x 1.57 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNeck Pocket Depth\u003c\/td\u003e\n\u003ctd\u003eAbout 16 mm (neck pocket 5.7 cm fit for 5.6-5.7 cm necks)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-drilled\u003c\/td\u003e\n\u003ctd\u003eNeck mounting holes and wire path only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe JD.Moon Strat-style poplar body is a sensible, budget-friendly choice for DIY builders who value convenience and a ready-to-use finish. It saves time with pre-drilled neck holes and SSS routing, making it good value for anyone assembling a custom Strat-style instrument, though players seeking premium tonewoods or pre-drilled pickguard mounting should consider alternatives.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the body come fully drilled for pickguard screws?\u003c\/strong\u003e\u003cbr\u003eThe body does not include pickguard mounting holes, so you will need to drill those if your pickguard requires them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat neck size fits this pocket?\u003c\/strong\u003e\u003cbr\u003eThe neck pocket depth is about 16 mm and the pocket measures roughly 5.7 cm, suitable for necks around 5.6 cm to 5.7 cm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre pickups and hardware included?\u003c\/strong\u003e\u003cbr\u003eNo, this listing is for the bare poplar body only; pickups, bridge, neck, and other hardware must be supplied separately.\u003c\/p\u003e","brand":"JD.Moon","offers":[{"title":"Default Title","offer_id":46751188254939,"sku":"B0CJ4NBK82","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61kfej13NTL._AC_SL1000.jpg?v=1747559509","url":"https:\/\/gearmusthave.com\/products\/customize-your-fender-strat-diy-poplar-guitar-body-jd-moon","provider":"GearMustHave","version":"1.0","type":"link"}