{"product_id":"d-tap-to-lemo-0b-2-pin-male-power-cable-59in-flexible-reach","title":"D TAP to LEMO 0B 2 Pin Male Power Cable - 59in flexible reach","description":"\u003cp\u003eIn this review of the D TAP to LEMO 0B 2 Pin Male Power Cable, the bottom line is straightforward: it is a practical, no-frills power lead for camera operators who need to draw power from a D-Tap output to devices with a LEMO 0B 2 pin input. The reviewer found the cable reliable for on-set use and well suited to run small monitors, wireless transmitters, or cinema cameras that accept a 2-pin LEMO-style plug. Its 59in length and tested construction make it useful for tidy rigs and battery-mounted setups where a modest current draw is expected.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eD-Tap to 2 Pin:\u003c\/strong\u003e Converts a standard male D-Tap output to a LEMO 0B 2 pin male connector so cameras and accessories can be powered from gold mount or V-mount battery plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide compatibility:\u003c\/strong\u003e Works with Teradek Bond, Z Cam, ARRI, RED, DJI accessories and many monitors or transmitters that use a 2-pin LEMO-style input.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage range:\u003c\/strong\u003e Supplies a typical output of 14.2V and functions across a working range of 10V to 16.3V to match common camera and accessory power requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent capacity:\u003c\/strong\u003e Rated for up to 3A continuous current, suitable for small monitors, wireless units, and similar low-to-moderate draw devices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength and handling:\u003c\/strong\u003e At about 59in (150cm) the cable offers flexible reach for tidy rigs and enough slack to route around cages and battery plates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne year guarantee:\u003c\/strong\u003e Each cable is factory tested and backed by a one year guarantee for peace of mind on repeat location use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThis cable suits independent cinematographers, ENG shooters, and rental houses that need a simple, reliable way to power 2-pin LEMO-equipped gear from D-Tap outputs on gold mount or V-mount batteries. It is especially practical for operators using Teradek Bond systems, small monitors, or camera accessories from RED, ARRI and Z Cam where a neat, medium-length lead is preferred.\u003c\/p\u003e\u003cp\u003eThose who should look elsewhere include users requiring higher current delivery for power-hungry devices, or productions that demand waterproof or locking cable assemblies beyond a standard 2-pin design. If you need a shorter or extremely ruggedized armored cable, consider a purpose-built alternative.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSimple D-Tap to LEMO 0B interface that solves the common need to power 2-pin devices from battery plates.\u003c\/li\u003e\n\u003cli\u003e59in length provides good routing flexibility and reduces clutter on camera rigs.\u003c\/li\u003e\n\u003cli\u003eWide compatibility with many cinema cameras and accessories, making it versatile on set.\u003c\/li\u003e\n\u003cli\u003eFactory tested and covered by a one year guarantee for reliable field use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum 3A current rating limits use with higher-draw accessories or longer power runs.\u003c\/li\u003e\n\u003cli\u003eThe cable is a standard assembly and lacks extra ruggedization or locking features found on specialized pro cables.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector A\u003c\/td\u003e\n\u003ctd\u003eStandard male D-Tap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector B\u003c\/td\u003e\n\u003ctd\u003eLEMO 0B 2 pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003e14.2V nominal (10V-16.3V working)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum current\u003c\/td\u003e\n\u003ctd\u003e3A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e59in (150cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e30g (1.1oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eOne year guarantee\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe D TAP to LEMO 0B 2 Pin Male Power Cable is a practical, cost-effective cable for users who need to power 2-pin LEMO-style devices from D-Tap battery outputs. It delivers adequate voltage and a sensible 59in length for tidy rigging, and its 3A limit and standard construction make it best for small monitors, wireless transmitters, and similar accessories rather than high-draw devices. For its price and compatibility range, it represents solid value for most camera operators.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWill this cable power my monitor?\u003c\/strong\u003e\u003cbr\u003eYes, it will power small to mid-size monitors that accept a 2-pin LEMO-style input provided the monitor's current draw stays under 3A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat batteries can I use with it?\u003c\/strong\u003e\u003cbr\u003eUse it with gold mount or V-mount battery plates that expose a D-Tap output; the cable draws power from the D-Tap connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cable tested and supported?\u003c\/strong\u003e\u003cbr\u003eYes, each cable is factory tested and the product includes a one year guarantee; contact the manufacturer for support.\u003c\/p\u003e","brand":"LSYRIA","offers":[{"title":"Default Title","offer_id":48607267422427,"sku":"B09V4DCTHT","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61I4FvalxSL._AC_SL1500.jpg?v=1778391921","url":"https:\/\/gearmusthave.com\/products\/d-tap-to-lemo-0b-2-pin-male-power-cable-59in-flexible-reach","provider":"GearMustHave","version":"1.0","type":"link"}