{"product_id":"dark-bronze-bent-rain-gutter-valley-splash-guards-2-pack","title":"Dark Bronze Bent Rain Gutter Valley Splash Guards - 2 Pack","description":"\u003cp\u003eIn this review of the Dark Bronze Bent Rain Gutter Valley Splash Guards, the bottom line is simple: homeowners who need a clean, effective solution to water overshooting valley gutters will appreciate these guards. Designed as a pair and supplied with matching fasteners and a hex bit driver, this set delivers a straightforward fix for heavy downpours that fling water past gutters. The reviewer found them especially useful where an inside corner or valley needs a subtle, color-matched trim that also stops splash-through without visible front screws.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium pre-finished aluminum:\u003c\/strong\u003e The guards are made from high-quality, pre-finished aluminum that resists corrosion and matches gutter finishes for a neat finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraight or bent styles:\u003c\/strong\u003e Bent guards suit inside corners and valley transitions so water follows the gutter path instead of overshooting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete hardware included:\u003c\/strong\u003e Each order includes matching 1\/2' sheet metal screws and a 1\/4' hex bit driver so installation starts and finishes in one visit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo visible front screws:\u003c\/strong\u003e Fasteners are installed on the backside of the guard for a clean front appearance and improved curb appeal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy installation:\u003c\/strong\u003e No pre-drilling is required with the included sheet metal screws, making this a practical option for DIYers and contractors alike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThese splash guards are aimed at homeowners, handymen, and small contractors who need a neat, low-effort solution for water overshooting gutter valleys. They are particularly useful on homes with matching dark bronze gutters where a color-coordinated, decorative or classic guard is preferred.\u003c\/p\u003e\u003cp\u003eThey are less appropriate for situations needing full gutter reconfiguration or on very unusual roof geometries where custom metalwork is required; outside corners can be bent upon request, but fully custom shapes are outside the scope of this off-the-shelf guard.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSturdy pre-finished aluminum construction that stands up to heavy rain and matches gutter color.\u003c\/li\u003e\n\u003cli\u003eIncludes matching screws and a hex bit driver, so no extra trips to the hardware store.\u003c\/li\u003e\n\u003cli\u003eBackside fasteners keep the front of the gutter valley clean and decorative.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBent style is intended for inside corners; outside corner bending requires a special request and may delay installation.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e2 splash guards per order\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePre-finished aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded hardware\u003c\/td\u003e\n\u003ctd\u003e1\/2' sheet metal screws and 1\/4' hex bit driver\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyles available\u003c\/td\u003e\n\u003ctd\u003eStraight or Bent (inside corner)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\/color\u003c\/td\u003e\n\u003ctd\u003eDark bronze pre-finish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo pre-drilling required with included screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eFor anyone looking to stop water from overshooting gutter valleys without visible fasteners or heavy remodeling, these dark bronze bent splash guards are a practical choice. They combine sturdy pre-finished aluminum, included matching hardware, and easy DIY installation to deliver a tidy, effective finish that most homeowners will find good value for routine gutter maintenance.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan these guards be painted to match a different gutter color?\u003c\/strong\u003e\u003cbr\u003eYes, they can be painted, but the product arrives with a pre-finished dark bronze coating intended to match standard finishes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre screws visible after installation?\u003c\/strong\u003e\u003cbr\u003eNo, screws are placed on the backside of the guard so no fasteners are visible from the front.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need to pre-drill holes?\u003c\/strong\u003e\u003cbr\u003eNo pre-drilling is required when using the included 1\/2' sheet metal screws and the supplied 1\/4' hex bit driver.\u003c\/p\u003e","brand":"Eagle 1 Products","offers":[{"title":"Default Title","offer_id":48230049710299,"sku":"B0BDXXPJX5","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/511ZUEeN0SL._AC_SL1500.jpg?v=1770716019","url":"https:\/\/gearmusthave.com\/products\/dark-bronze-bent-rain-gutter-valley-splash-guards-2-pack","provider":"GearMustHave","version":"1.0","type":"link"}