{"product_id":"din-rail-ps-15v-6-5a-97-5w-dr-100-15-compact-din-rail-power","title":"DIN Rail PS 15V 6.5A 97.5W DR-100-15 - Compact DIN Rail Power","description":"\u003cp\u003eIn this review of the DIN Rail PS 97.5W 15V 6.5A DR-100-15 the reviewer finds a compact, single-output AC-DC switching supply aimed at installers and hobbyists who need dependable low-voltage power on a DIN rail. The bottom line: this unit is for projects that require a stable 15V at up to 6.5A in a narrow package, and it stands out because it provides a full 97.5W output in a standard DIN-rail form factor suitable for control panels and small industrial systems.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle 15V output:\u003c\/strong\u003e Supplies a consistent 15V rail ideal for sensors, controllers, and small electronics that need moderate current without multiple outputs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e97.5W rated power:\u003c\/strong\u003e Delivers up to 97.5W so it can run several peripherals or a single higher-current device without voltage sag under normal load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.5A maximum current:\u003c\/strong\u003e Provides a useful 6.5A headroom for short-duration peaks and steady loads common in automation and lab setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDIN-rail mounting:\u003c\/strong\u003e The rail-mounted design saves panel space and makes installation straightforward in electrical cabinets and equipment racks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC-DC switching design:\u003c\/strong\u003e Offers efficient conversion from mains AC to low-voltage DC, helping to reduce heat and improve operating efficiency compared with older linear supplies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis power supply is best for technicians, system integrators, and makers who need a reliable 15V DC source inside a control cabinet or test bench. Its power and current ratings match typical industrial sensors, small PLCs, communication modules, and LED drivers that run at 15V.\u003c\/p\u003e\n\u003cp\u003eIt is not intended for users who need multiple voltage rails, ultra-low noise laboratory supplies, or extremely compact bench adapters; those users should look for multi-output or linear bench supplies instead.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompact DIN-rail form makes mounting and wiring neat and repeatable in panel installations.\u003c\/li\u003e\n\u003cli\u003eFull 97.5W output at 15V gives solid headroom for peripherals and short current spikes.\u003c\/li\u003e\n\u003cli\u003e6.5A continuous current supports moderate loads commonly found in automation tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-output design means no built-in secondary voltages for systems that need multiple rails.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEverSale\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel series\u003c\/td\u003e\n\u003ctd\u003eDR-100 Series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput voltage\u003c\/td\u003e\n\u003ctd\u003e15V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput current\u003c\/td\u003e\n\u003ctd\u003e6.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated power\u003c\/td\u003e\n\u003ctd\u003e97.5W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eDIN-rail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e6-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe DR-100-15 is a practical, no-frills DIN-rail switching supply that delivers a reliable \u003cstrong\u003e15V 6.5A\u003c\/strong\u003e source at near-100W power in a compact package. It is good value for installers who need a stable single-output rail for control panels and small industrial equipment, but those needing multiple voltages or precision bench control should consider alternate supplies.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this power a PLC or controller that needs 15V?\u003c\/strong\u003e\u003cbr\u003eYes, the unit provides a steady 15V DC output at up to 6.5A which is suitable for many PLCs and controllers within that current envelope.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it easy to mount and wire in a control cabinet?\u003c\/strong\u003e\u003cbr\u003eYes, the DIN-rail form factor and 6-pin connector make installation and neat wiring straightforward for electricians and technicians.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it provide multiple outputs or adjustable voltage?\u003c\/strong\u003e\u003cbr\u003eNo, this is a single-output 15V fixed supply, so multi-rail applications will require additional supplies or a different model.\u003c\/p\u003e","brand":"EverSale","offers":[{"title":"Default Title","offer_id":48670180573403,"sku":"B00FRBT8AK","price":86.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61oZAsafNLL._SL1093.jpg?v=1778646230","url":"https:\/\/gearmusthave.com\/products\/din-rail-ps-15v-6-5a-97-5w-dr-100-15-compact-din-rail-power","provider":"GearMustHave","version":"1.0","type":"link"}