{"product_id":"drill-america-v-cobalt-heavy-duty-drill-bit-pack-of-6-for-tough","title":"Drill America V Cobalt Heavy Duty Drill Bit Pack of 6 - For Tough","description":"\u003cp\u003eOur review of the Drill America V Cobalt Heavy Duty Drill Bit (Pack of 6) finds these jobber length bits best suited for users who need durable bits for hard, high tensile materials. The single biggest reason to buy is the cobalt steel construction that sustains higher red hardness and allows faster cutting speeds than standard high-speed steel, which makes these bits a practical choice for machining stainless steel, inconel, titanium and other difficult alloys.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCobalt steel construction:\u003c\/strong\u003e Provides improved heat resistance and higher red hardness so the bits can run up to 30 percent faster than HSS in demanding cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold oxide finish:\u003c\/strong\u003e A thin oxide surface treatment that helps identify the tools without materially changing cutting performance compared with uncoated cobalt.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRound shanks:\u003c\/strong\u003e Allow use with a wide variety of chucks and toolholding systems for straightforward setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpiral flute design:\u003c\/strong\u003e Right-hand cut flutes evacuate chips up and out of the hole to reduce clogging on deeper or tougher cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufactured to NAS 907:\u003c\/strong\u003e Built to a recognized aerospace standard, which indicates consistent geometry and tolerances for repeatable results.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThe Drill America V Cobalt set is ideal for machine shops, fabricators, and experienced DIYers who regularly drill stainless steel, nickel alloys, or other high tensile materials where higher cutting temperatures and tool wear are a concern. Its jobber length and robust construction make it useful for through-holes and general-purpose metalwork when a longer reach is needed.\u003c\/p\u003e\u003cp\u003eUsers who mainly cut soft metals, plastics, or who require specialty coatings for extended life in production environments may want to consider alternatives; carbide or coated bits can outperform cobalt for longevity in high-volume, high-feed applications.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent durability and heat resistance from cobalt steel for tough metals.\u003c\/li\u003e\n\u003cli\u003eGood value for money according to multiple users who found performance comparable to more expensive bits.\u003c\/li\u003e\n\u003cli\u003eSharp initial cutting edge that performs well and reduces walking on start-up holes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGold oxide is mainly cosmetic and does not provide the wear protection of modern hard coatings.\u003c\/li\u003e\n\u003cli\u003eNot a substitute for solid carbide when maximum speed and minimal deflection are required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eDrill America\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eD\/ACO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eCobalt steel (heat resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGold oxide thin surface treatment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShank type\u003c\/td\u003e\n\u003ctd\u003eRound shank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength style\u003c\/td\u003e\n\u003ctd\u003eJobber length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing standard\u003c\/td\u003e\n\u003ctd\u003eNational Aerospace Standard 907\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe Drill America V Cobalt pack of 6 is a sensible choice for anyone who needs reliable, heat-resistant drill bits for stainless and other hard alloys; they offer strong cutting performance, sharpness out of the box, and durable life at a reasonable price. For workshop use where toughness and repeatability matter more than the absolute longest life per bit, these represent good value.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eAre these bits suitable for stainless steel?\u003c\/strong\u003e\u003cbr\u003eYes, the cobalt steel and higher red hardness make them well suited to stainless and other high tensile strength alloys.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo they have a wear-resistant coating?\u003c\/strong\u003e\u003cbr\u003eThey use a thin gold oxide finish mainly for identification; it does not offer the same protection as modern hard coatings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill they fit standard chucks?\u003c\/strong\u003e\u003cbr\u003eYes, the round shanks work with most drill chucks and common toolholding systems.\u003c\/p\u003e","brand":"Drill America","offers":[{"title":"Default Title","offer_id":48261881561307,"sku":"B00FX70BFE","price":58.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71xcTcJaimL._SL1500_7b293fea-268a-4987-ba15-53e11454e08f.jpg?v=1778239947","url":"https:\/\/gearmusthave.com\/products\/drill-america-v-cobalt-heavy-duty-drill-bit-pack-of-6-for-tough","provider":"GearMustHave","version":"1.0","type":"link"}