{"product_id":"evil-energy-3-8-in-od-aluminum-fuel-line-kit-25ft-durable-hard-line","title":"EVIL ENERGY 3\/8 in OD Aluminum Fuel Line Kit 25ft - Durable Hard Line","description":"\u003cp\u003eIn this review the EVIL ENERGY 3\/8 in OD Aluminum Fuel Line Kit is evaluated for DIY mechanics and automotive shops that need a reliable, lightweight hard line for fuel and fluid routing. The bottom line: this 25ft coil of 1060 grade aluminum tubing stands out for its balance of flexibility and strength, making it a practical option for fuel return lines, transmission lines, and other low- to mid-pressure applications where corrosion resistance and thermal conductivity matter.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize and capacity:\u003c\/strong\u003e The 3\/8 in OD tube with 0.32 in ID and 0.05 in wall thickness provides a consistent internal flow and works up to 700 PSI, suitable for many automotive fluid duties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial quality:\u003c\/strong\u003e Constructed from 1060 grade aluminum that meets ASTM B210 specifications, the seamless tubing is corrosion resistant and thermally conductive for longer service life in underhood environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e Rated from -58F to 392F, the tube handles hot engine bays and cold starts without brittle behavior or softening within that window.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete kit:\u003c\/strong\u003e The 25ft coil ships with a tube cutter, bender, deburring tool, four tube clamps, and six 6AN female to 3\/8 in compression fittings to allow independent installation and fitting fabrication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile application:\u003c\/strong\u003e Usable with diesel, gasoline, E85, transmission oil, water and air, the tubing adapts to practices like fuel returns, AC lines, and air compressor plumbing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe kit is aimed at gearheads, restoration builders, and small shops that want a lightweight, corrosion-resistant metal hard line they can bend and cut on the bench or in the garage. It suits those replacing rubber hoses with a firmer line or fabricating custom runs for fuel returns, transmission cooling or accessory air lines.\u003c\/p\u003e\n\u003cp\u003eIt is less appropriate for high-pressure injection fuel rails or applications requiring crimp-style fittings not supported by compression fittings included here. If a builder needs pre-formed rigid lines or lines certified for extremely high pressures beyond the listed burst rating, they should look elsewhere.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight aluminum construction resists corrosion and reduces weight compared with steel hard line.\u003c\/li\u003e\n\u003cli\u003eComes with tools and six compression fittings so a user can cut, bend and deburr without sourcing extras.\u003c\/li\u003e\n\u003cli\u003eWide temperature tolerance and compatibility with common automotive fluids adds installation flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe 700 PSI working pressure is adequate for many uses but is not intended for high-pressure direct injection fuel systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd\u003e3\/8 in (9.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Diameter\u003c\/td\u003e\n\u003ctd\u003e0.32 in (8.1 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWall Thickness\u003c\/td\u003e\n\u003ctd\u003e0.05 in (1.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e25 ft (7.62 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorking Pressure\u003c\/td\u003e\n\u003ctd\u003e700 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBurst Pressure\u003c\/td\u003e\n\u003ctd\u003e2000 PSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial \/ Spec\u003c\/td\u003e\n\u003ctd\u003e1060 grade aluminum, meets ASTM B210\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eFor DIY installers and small shops needing a flexible, corrosion-resistant hard line, this 25ft EVIL ENERGY aluminum tube kit delivers good value thanks to its material grade, included tools and fittings, and broad fluid compatibility. It is a practical choice for fuel return, transmission, AC and air lines, provided the user does not require extremely high pressure ratings or preformed tubing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this tube be used with gasoline and E85?\u003c\/strong\u003e\u003cbr\u003eYes, the 1060 aluminum tube is compatible with gasoline and E85 as listed for common automotive fluid use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre fittings and tools included to install the line?\u003c\/strong\u003e\u003cbr\u003eYes, the kit includes a tube cutter, bender, deburring tool, four tube clamps and six 6AN female to 3\/8 in compression fittings for on-vehicle bending and fitting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for high-pressure fuel injection systems?\u003c\/strong\u003e\u003cbr\u003eNo, the working pressure of 700 PSI and the included compression fittings make it unsuitable for modern high-pressure direct injection rails that require far higher ratings and specific fittings.\u003c\/p\u003e","brand":"EVIL ENERGY","offers":[{"title":"Default Title","offer_id":48236274221275,"sku":"B0D6XY7XH9","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/81YGa0BuM6L._AC_SL1500.jpg?v=1770717800","url":"https:\/\/gearmusthave.com\/products\/evil-energy-3-8-in-od-aluminum-fuel-line-kit-25ft-durable-hard-line","provider":"GearMustHave","version":"1.0","type":"link"}