{"product_id":"flashers-7-grey-epdm-flexible-roof-jack-pipe-boot-made-in-usa","title":"Flashers #7 Grey EPDM Flexible Roof Jack Pipe Boot - Made in USA","description":"\u003cp\u003eIn this review of the Flashers #7 Grey EPDM Flexible Roof Jack Pipe Boot, the bottom line is simple: this is a durable, easy-to-fit roof flashing aimed at contractors and handy homeowners who need a reliable seal for metal roofing penetrations. The standout reason to consider it is its flexible EPDM rubber construction, which resists cracking across a wide temperature range and adapts to different metal roof profiles without special tools. For installations where a precise fit and long-term flexibility matter, this flashing delivers clear practical benefits.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% Made in the USA:\u003c\/strong\u003e Manufactured domestically, which supports American labor and ensures tight production oversight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide temperature rating:\u003c\/strong\u003e EPDM is rated to service from -65 to +250 degrees F, providing stability in extreme climates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible rubber cone:\u003c\/strong\u003e The rubber cone resists cracking and accommodates expansion, contraction and pipe vibration for a longer-lasting seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminum ring and heavy fold:\u003c\/strong\u003e The base design allows the boot to conform to different roof pitches and metal profiles for a better fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple installation:\u003c\/strong\u003e No special tools required and the cone is marked in inches and millimeters for easy trimming with tin snips or scissors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCode listed:\u003c\/strong\u003e Holds a Certificate of Listing with IAPMO R\u0026amp;T, indicating compliance with UPC and IPC plumbing codes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe Flashers #7 is best for roofers, metal roofing contractors, and skilled homeowners who install or replace pipe flashings on standing seam or R-panel metal roofs and need a flexible, code-listed solution. Its adaptability to pipe sizes from 6 in to 11 in and the ability to trim the cone make it practical on jobs with varying pipe diameters.\u003c\/p\u003e\n\u003cp\u003eIt is less suitable for users who require a hard-shelled or decorative finished flashing where appearance is the primary concern, or for applications demanding integrated plumbing stacks pre-sized to an exact sleeve with a rigid flange. For those, a different style of flashing may be preferable.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade in the USA construction offers traceable manufacturing quality and domestic sourcing.\u003c\/li\u003e\n\u003cli\u003eFlexible EPDM material provides durability across a wide temperature range and prevents cracking on movement.\u003c\/li\u003e\n\u003cli\u003eMarked cone and simple trimming make installation fast and tool-light for field adjustments.\u003c\/li\u003e\n\u003cli\u003eCode listing with IAPMO R\u0026amp;T provides assurance of compliance with UPC and IPC standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSome customers report mixed water retention in the bottom fold, which may require attention depending on roof drainage details.\u003c\/li\u003e\n\u003cli\u003eThere are isolated reports of premature failure in unusual conditions, so extreme exposure scenarios should be monitored.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJackman Industries, Inc.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eEPDM rubber cone with aluminum ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePipe OD range\u003c\/td\u003e\n\u003ctd\u003e6 in to 11 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature rating\u003c\/td\u003e\n\u003ctd\u003e-65 to +250 degrees F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eNo special tools; cone marked in in and mm for trimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eCertificate of Listing with IAPMO R\u0026amp;T (UPC and IPC compliance)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Flashers #7 Grey EPDM Flexible Roof Jack is a practical, cost-effective flashing for metal roofs where flexibility and code compliance matter. It offers a good balance of durability, ease of installation and fit for contractors and experienced homeowners, making it a sound value when a flexible EPDM solution is required.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this flashing be trimmed to fit different pipe diameters?\u003c\/strong\u003e\u003cbr\u003eYes. The rubber cone is clearly marked in inches and millimeters and can be trimmed with tin snips or scissors for a customized fit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill the EPDM material hold up in extreme temperatures?\u003c\/strong\u003e\u003cbr\u003eEPDM is rated for continuous service from -65 to +250 degrees F, so it is suitable for most extreme climate conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this product compliant with plumbing codes?\u003c\/strong\u003e\u003cbr\u003eYes. The Flashers line holds a Certificate of Listing with IAPMO R\u0026amp;T, showing compliance with the UPC and IPC codes.\u003c\/p\u003e","brand":"Jackman Industries, Inc.","offers":[{"title":"Default Title","offer_id":48242893357275,"sku":"B08HVSDGTP","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51xFxg6DayL._AC_SL1000.jpg?v=1771088090","url":"https:\/\/gearmusthave.com\/products\/flashers-7-grey-epdm-flexible-roof-jack-pipe-boot-made-in-usa","provider":"GearMustHave","version":"1.0","type":"link"}