{"product_id":"gasoline-fuel-filler-tube-with-4-hose-clamps-for-2-inch-id","title":"Gasoline Fuel Filler Tube 2 in ID Reinforced Hose - Flexible Fit","description":"\u003cp\u003eIn this review the Gasoline Fuel filler tube with 4 Hose Clamps is evaluated for anyone replacing a worn filler neck or extending a tank-to-cap line. The single biggest reason to buy is its reinforced construction with internal nylon cording and a nitrile tube that keeps the line flexible yet strong across a wide temperature range, making it a practical replacement for classic trucks, imports and custom fuel-fill routing. The review focuses on fit, material, ease of installation and any real limitations discovered by users.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eReinforced construction:\u003c\/strong\u003e The internal nylon cording gives added strength so the hose resists collapse while remaining flexible for routing.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eNitrile tube:\u003c\/strong\u003e The high-quality nitrile inner tube is chosen for fuel compatibility and helps the hose withstand common gasoline blends up to EPA-allowed concentrations.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eWide temperature range:\u003c\/strong\u003e Rated from -40 deg. F to +212 deg. F so it will remain serviceable in cold starts and hot engine-bay environments.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eLength and diameter:\u003c\/strong\u003e At 15 7\/8 in long with a 2 in inside diameter, it provides enough reach for many tank-to-filler applications without excessive trimming.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eEasy to trim and fit:\u003c\/strong\u003e The tube is flexible and can be cut cleanly with a box knife for custom installations, simplifying swaps and extensions.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eIncludes hose clamps:\u003c\/strong\u003e Supplied with hose clamps to secure connections at the filler neck and tank ends for a ready-to-install package.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis hose suits hobbyists, classic truck owners and DIY mechanics who need a reliable replacement filler neck hose for rear-mount tanks or conversion projects where a 2 in inside diameter is required. It is especially helpful when original rubber lines have hardened or collapsed and a reinforced, fuel-rated hose is needed.\u003c\/p\u003e\n\u003cp\u003eIt is less appropriate for applications that require a longer custom run than 15 7\/8 in without joining sections, or for users who need a braided stainless feed or OEM-specific molded filler neck; in those cases a purpose-built or longer assembly should be chosen.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eReinforced with nylon cording for strength and resistance to collapse during refueling.\u003c\/li\u003e\n \u003cli\u003eFuel-compatible nitrile tube and wide -40 deg. F to +212 deg. F temperature rating for reliable service.\u003c\/li\u003e\n \u003cli\u003eFlexible and easy to cut to length, making installation straightforward for DIY fitting.\u003c\/li\u003e\n \u003cli\u003eIncluded clamps and correct 2 in ID make it a practical replacement for many older vehicles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eSome buyers report only three clamps included instead of four, so check the package before installation.\u003c\/li\u003e\n \u003cli\u003eAt 15 7\/8 in length it may be too short for certain extended routing without adding additional hose sections.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e15 7\/8 in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInside diameter\u003c\/td\u003e\n\u003ctd\u003e2 in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eNitrile tube with nylon cording reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e-40 deg. F to +212 deg. F\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIncluded hardware\u003c\/td\u003e\n\u003ctd\u003eHose clamps (listed as 4; verify contents)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eFuel filler neck, fuel hose, filler neck vent hose\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Gasoline Fuel filler tube is a sensible, value-oriented replacement for those needing a reinforced 2 in ID filler hose; it balances flexibility, fuel compatibility and a durable reinforced build. DIYers and owners of older vehicles who measure and confirm the 15 7\/8 in length will find it good value, though installers should verify the clamp count before starting the job.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill this hose handle common gasoline blends including ethanol?\u003c\/strong\u003e\u003cbr\u003eThe nitrile tube is specified for use up to EPA-allowed concentrations, so it is suitable for typical ethanol blends used in automotive fuel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan the hose be cut to a shorter length?\u003c\/strong\u003e\u003cbr\u003eYes, the tube is flexible and can be cut cleanly with a box knife to fit shorter runs or custom routing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the package always include four clamps?\u003c\/strong\u003e\u003cbr\u003ePackaging lists four clamps, but some customers reported receiving only three; inspect the contents on receipt and have an extra clamp available if needed.\u003c\/p\u003e","brand":"TKKEUEP","offers":[{"title":"Default Title","offer_id":48166329614555,"sku":"B0BXCKPN3C","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61T3wIaveCL._AC_SL1500.jpg?v=1769251129","url":"https:\/\/gearmusthave.com\/products\/gasoline-fuel-filler-tube-with-4-hose-clamps-for-2-inch-id","provider":"GearMustHave","version":"1.0","type":"link"}