{"product_id":"heavy-duty-magnetic-v-pads-kit-4-piece-kit-strong-holding-power","title":"Heavy Duty Magnetic V-Pads Kit, 4 Piece Kit - Strong Holding Power","description":"\u003cp\u003eIn this review the Heavy Duty Magnetic V-Pads Kit is judged on its capacity to locate, hold, and position metal parts in tight or awkward spots. Designed for fabricators and contractors who need a dependable temporary hold, the kit's single biggest advantage is its concentrated magnetic grip courtesy of eight rare-earth magnets per V-pad, delivering a max pull force of 58 lbs. The removable magnetic back plate adds flexibility so a reviewer can recommend it for weld fixturing, shop layout, and on-the-go metal assembly where a compact, strong clamp substitute is useful.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy duty holding:\u003c\/strong\u003e Each V-pad uses eight rare-earth magnets to provide strong, reliable pull for holding steel in place during layout and tack welding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile V profile:\u003c\/strong\u003e The V-shaped face supports round, flat, and square parts, making it practical for a range of metalworking tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable back plate:\u003c\/strong\u003e The back plate that includes two magnets is removable and secured by a screw, adding configuration options for tighter or different grip surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact footprint:\u003c\/strong\u003e At approximately 5 x 2.5 in the pads sit well in tight spots where larger fixtures would not fit, simplifying positioning in cramped substructures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh pull force:\u003c\/strong\u003e The rated maximum pull force of 58 lbs per pad offers the holding strength needed for many heavy duty shop applications without permanent fixturing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe kit is best for metal fabricators, welders, and maintenance technicians who frequently need temporary, repeatable holds on steel components and want a portable alternative to clamps. It suits shop and field work where positioning of round or square stock in awkward orientations is common.\u003c\/p\u003e\n\u003cp\u003eThose who need precision alignment for final machining or highly delicate, non-ferrous work should look elsewhere; these pads are optimized for strong magnetic holding on ferrous materials and not designed for non-magnetic metals or as a permanent fastening solution.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEight rare-earth magnets per V-pad deliver consistently strong holding force for heavy duty tasks.\u003c\/li\u003e\n\u003cli\u003eV-shaped face accommodates round, flat, and square stock, reducing the need for multiple specialty fixtures.\u003c\/li\u003e\n\u003cli\u003eRemovable back plate increases versatility for different setups and tight clearances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMagnetic holding is limited to ferrous materials and will not work on stainless or aluminum parts without ferrous backing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eStrong Hand Tools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit contents\u003c\/td\u003e\n\u003ctd\u003e4 V-pads with removable back plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnets per V-pad\u003c\/td\u003e\n\u003ctd\u003e8 rare-earth magnets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemovable back plate\u003c\/td\u003e\n\u003ctd\u003eIncludes two magnets and secured by a screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension\u003c\/td\u003e\n\u003ctd\u003e5 x 2.5 in (127 x 64 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax pull force\u003c\/td\u003e\n\u003ctd\u003e58 lbs (26 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Heavy Duty Magnetic V-Pads Kit is a solid, practical choice for welders and fabricators who need portable, repeatable holding on ferrous parts. With eight powerful magnets per pad and a removable back plate for added flexibility, it provides excellent value for shop fixtures and layout tasks where a strong temporary hold is required.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill these V-pads hold round stock securely?\u003c\/strong\u003e\u003cbr\u003eYes, the V-shaped face is designed to cradle round stock as well as flat and square parts for stable positioning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan they be used on stainless or aluminum?\u003c\/strong\u003e\u003cbr\u003eNo, these are magnetic pads optimized for ferrous materials and will not hold non-magnetic metals without ferrous backing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow strong is the magnetic pull?\u003c\/strong\u003e\u003cbr\u003eEach V-pad is rated for a maximum pull force of 58 lbs (26 kg), making them suitable for many heavy duty shop uses.\u003c\/p\u003e","brand":"Strong Hand Tools","offers":[{"title":"Default Title","offer_id":48147690520795,"sku":"B094DW74Q6","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/81zH0U9RITS.__AC_SX300_SY300_QL70_FMwebp.webp?v=1768906381","url":"https:\/\/gearmusthave.com\/products\/heavy-duty-magnetic-v-pads-kit-4-piece-kit-strong-holding-power","provider":"GearMustHave","version":"1.0","type":"link"}