{"product_id":"hiton-paint-spray-booth-tacky-intake-filter-pad-20-x-25-20-pack","title":"Hiton Paint Spray Booth Tacky Intake Filter Pad 20 x 25 (20 Pack)","description":"\u003cp\u003eIn this review of the Hiton Paint Spray Booth Tacky Intake Filter Pad, the bottom line is straightforward: this 20 pack is aimed at professional shops and serious hobbyists who need a cost-effective, first-stage cross draft intake solution that traps dust without adding moisture. The reviewer found the panels deliver consistent, economical performance thanks to a dry tackifier and a self-sealing gasket that reduce bypass. For anyone seeking reliable, disposable intake filtration for a busy spray booth, these panels offer practical value; those needing final-stage or super-fine filtration should pair them with a secondary filter.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry tackifier:\u003c\/strong\u003e Holds dirt and overspray particles in place without adding moisture, reducing the risk of sagging or dripping in the intake panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal wire frame:\u003c\/strong\u003e Heat sealed to an 11 gauge support frame to maintain panel shape and prevent flutter under cross draft conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-sealing gasket:\u003c\/strong\u003e Minimizes bypass by forming a firmer seal in the intake opening, helping keep contaminants out of the booth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo layers of polyester media:\u003c\/strong\u003e Provides a balance of dust-holding capacity and airflow for economical intake filtration over a range of design conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 pack convenience:\u003c\/strong\u003e Supplied in a bulk pack suitable for frequent filter changes in busy shops, reducing downtime ordering replacements.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe Hiton Series 55 panels are best for body shops, refinishing bays, and home shops that run cross draft spray booths and need an affordable, disposable intake filter for primary filtration. The design suits users who change intake panels regularly and want consistent performance from a dry, tacky surface and sturdy internal frame.\u003c\/p\u003e\n\u003cp\u003eThose who require final-stage, ultra-fine filtration for show-quality finishes or specialized coatings should look to pair these panels with a secondary high-efficiency filter, since some customers note they are primarily suited to first-stage use.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurable internal wire frame and heat seal provide stable, flutter-free performance under cross draft airflow.\u003c\/li\u003e\n\u003cli\u003eDry tackifier captures dirt without moisture, making handling and disposal cleaner.\u003c\/li\u003e\n\u003cli\u003eSelf-sealing gasket reduces bypass, improving overall booth cleanliness compared with non-gasketed panels.\u003c\/li\u003e\n\u003cli\u003eBulk 20 pack is practical for busy shops and helps lower per-panel cost.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot intended as a single-stage solution for ultra-fine finishes; customers report mixed feedback on filter quality for final-stage filtration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct name\u003c\/td\u003e\n\u003ctd\u003eHiton Paint Spray Booth Tacky Intake Filter Pad Series 55\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e20 in x 25 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack quantity\u003c\/td\u003e\n\u003ctd\u003e20 Pack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMedia\u003c\/td\u003e\n\u003ctd\u003eTwo layers of 100% polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupport\u003c\/td\u003e\n\u003ctd\u003eHeat sealed to 11 gauge internal wire frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket\u003c\/td\u003e\n\u003ctd\u003eSelf-sealing gasket to reduce bypass\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Hiton Series 55 tacky intake panels are a solid, economical choice for primary cross draft intake filtration in busy spray booths. Their dry tackifier, internal wire frame and gasket make them dependable for trapping dust and reducing bypass, and the 20 pack offers good value for regular maintenance cycles. Buy these if you need reliable first-stage filtration and plan to use a secondary filter for final fine finishing.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAre these panels suitable for cross draft booths?\u003c\/strong\u003e\u003cbr\u003eYes, they are designed specifically as cross draft intake panels with a wire frame and gasket to prevent flutter and bypass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow often should the panels be changed?\u003c\/strong\u003e\u003cbr\u003eChange frequency depends on usage and paint operations, but the 20 pack is intended for frequent replacement in busy shops to maintain intake performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo these panels replace final-stage filters?\u003c\/strong\u003e\u003cbr\u003eNo, customers note they work best as first-stage filtration; use a secondary high-efficiency filter for final finishing.\u003c\/p\u003e","brand":"HITON","offers":[{"title":"Default Title","offer_id":48264999960795,"sku":"B07ZJVM2KV","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51TpVYBTh5L._AC_SL1500.jpg?v=1776361548","url":"https:\/\/gearmusthave.com\/products\/hiton-paint-spray-booth-tacky-intake-filter-pad-20-x-25-20-pack","provider":"GearMustHave","version":"1.0","type":"link"}