{"product_id":"icc-male-to-male-25-pair-telco-cable-10ft-reliable-pbx-connection","title":"ICC Male to Male 25 Pair Telco Cable 10ft - Reliable PBX Connection","description":"\u003cp\u003eIn this review the ICC Male-to-Male 25 Pair Telco Cable 10ft is assessed for small office PBX and voice installations; it is best for technicians and IT staff who need a simple, durable way to connect legacy telephone systems with minimal fuss. The single biggest reason to buy is the reliable IDC termination and 90-degree CN50 connectors that reduce strain and cross connections in tight racks. The reviewer found it straightforward to install, NEC-compliant, and noticeably sturdy compared with thinner jumper cords.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIDC termination:\u003c\/strong\u003e Insulation displacement connectors terminate all 25 pairs cleanly to 25 polarized pins, providing secure mechanical connections without individual wire punching.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-plated contacts:\u003c\/strong\u003e Dual 50-pin male connectors use copper alloy contacts plated with 30 micro-inches of gold over nickel for consistent conductivity and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e100% solid copper conductors:\u003c\/strong\u003e 24 AWG annealed solid bare copper meets NEC Section 800.179, ensuring reliable signal transmission and compliance for building installs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e90-degree CN50 connectors:\u003c\/strong\u003e Right-angle connectors with protective hoods save space in dense racks and reduce cable strain in compact installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCMR riser rating and UL listed:\u003c\/strong\u003e Riser-rated CMR construction and UL listing allow safe vertical runs between floors while offering flame resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe cable suits small business IT teams, PBX installers, and telecom technicians who need a purpose-built Cat3 male-to-male jumper for voice and low-speed data lines. It's particularly useful where NEC compliance is required and where 90-degree connectors ease routing in patch panels or PBX shelves.\u003c\/p\u003e\n\u003cp\u003eIt is not aimed at users needing high-speed Ethernet or shielded data runs; for modern network backbones or PoE applications, a higher category shielded cable or twisted-pair Ethernet solution would be more appropriate.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRobust IDC termination reduces individual conductor errors and speeds installation.\u003c\/li\u003e\n\u003cli\u003eHigh-quality plated contacts improve longevity and reduce intermittent connection issues.\u003c\/li\u003e\n\u003cli\u003eNEC-compliant 100% solid copper conductors provide predictable electrical performance.\u003c\/li\u003e\n\u003cli\u003eRiser rating and UL listing make it suitable for building vertical cable runs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCat3 performance is limited to voice and low-speed data, so it is not suitable for modern high-speed Ethernet needs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable length\u003c\/td\u003e\n\u003ctd\u003e10 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePairs \/ conductors\u003c\/td\u003e\n\u003ctd\u003e25 pair, 24 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor material\u003c\/td\u003e\n\u003ctd\u003e100% annealed solid bare copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eDual 50-pin male IDC Telco connectors (CN50) 90-degree\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eContact plating\u003c\/td\u003e\n\u003ctd\u003e30 micro-inches gold over nickel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRating\u003c\/td\u003e\n\u003ctd\u003eCMR riser rated, UL listed E125268, 75C, 300V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThis ICC 25 pair male-to-male telco cable is a practical, cost-effective choice for PBX and telephone systems where NEC compliance and physical durability matter. Installers will appreciate the secure IDC termination and right-angle CN50 connectors; choose it when you need a dependable voice jumper, but select higher-category alternatives for modern data networks.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for PBX and telephone lines?\u003c\/strong\u003e\u003cbr\u003eYes - it is designed for voice and low-data PBX applications with 25 pairs terminated to 50-pin male connectors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the cable meet building code requirements?\u003c\/strong\u003e\u003cbr\u003eYes - the conductors are 100% solid bare copper and the assembly is NEC-compliant and UL listed with a CMR riser rating.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this work for Ethernet networking?\u003c\/strong\u003e\u003cbr\u003eNo - as a Cat3 25-pair cable it is intended for voice and low-speed data and is not appropriate for modern high-speed Ethernet links.\u003c\/p\u003e","brand":"ICC","offers":[{"title":"Default Title","offer_id":48664176656603,"sku":"B000O9IGAS","price":37.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51Mthmoqe3S._AC_SL1000_77b29114-afd4-4ec9-a528-53d3a908982f.jpg?v=1778683001","url":"https:\/\/gearmusthave.com\/products\/icc-male-to-male-25-pair-telco-cable-10ft-reliable-pbx-connection","provider":"GearMustHave","version":"1.0","type":"link"}