{"product_id":"kicker-compc-10ft-subwoofer-dvc-4-ohm-hard-hitting-bass","title":"KICKER CompC 10ft Subwoofer DVC 4-Ohm - Hard Hitting Bass","description":"\u003cp\u003eIn this review the KICKER CompC 10' Subwoofer is presented as an affordable, punchy option for anyone wanting stronger low end without spending on premium models. The bottom line: this 10' DVC 4-ohm driver delivers impressive punch and clear low-frequency slam when paired with the right enclosure and roughly 300 watts RMS, making it a solid choice for budget-focused car audio upgrades. It is best for riders who want loud, tight bass on a budget rather than long-term high-power reliability for daily heavy use.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual 4-Ohm Voice Coils:\u003c\/strong\u003e Allows flexible wiring for 2-ohm or 8-ohm systems so installers can match amplifier load and tuning easily.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eInjection-Molded Polypropylene Cone:\u003c\/strong\u003e Provides a rigid cone surface that keeps bass tight and reduces cone flex at higher volumes.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePerimeter Venting:\u003c\/strong\u003e Improves thermal management so the driver runs cooler under heavy use and reduces power-related distortion.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eRibbed Polyurethane Surround:\u003c\/strong\u003e Durably controls cone excursion for strong low-frequency output and consistent performance in a sealed or ported box.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eHigh Temp Voice Coil \u0026amp; Spring-Loaded Terminals:\u003c\/strong\u003e Helps tolerate hotter operating conditions and simplifies wiring during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe CompC 10' is aimed at budget-conscious car audio enthusiasts who want loud, hard-hitting bass without a premium price tag, especially when used in a sealed or ported enclosure with an amplifier around 300 watts RMS. It suits weekend builds, show cars that need strong free-air or boxed bass, and anyone matching it to a CX series or similar affordable amp.\u003c\/p\u003e\n\u003cp\u003eThose looking for maximum longevity under constant heavy power or extreme SPL competition use should consider higher-tier models with reinforced motors and extended-lifespan track records. Also, if you need sub-bass extension below typical vehicle levels, a larger or higher-end sub may be a better fit.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eExcellent value for money with punchy, controlled bass from the rigid polypropylene cone.\u003c\/li\u003e\n \u003cli\u003eFlexible wiring thanks to dual 4-ohm voice coils, making it adaptable to many amps and installs.\u003c\/li\u003e\n \u003cli\u003eThermal venting and high-temp voice coil help the speaker handle transient peaks more reliably than unvented designs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eSome users report limited lifespan under heavy use, so long-term reliability may vary compared with higher-end units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e10 in (25 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003eDual 4-ohm voice coils\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003ePower Handling (Peak\/RMS)\u003c\/td\u003e\n\u003ctd\u003e600 W \/ 300 W\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCone\u003c\/td\u003e\n\u003ctd\u003eInjection-molded polypropylene\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eSurround\u003c\/td\u003e\n\u003ctd\u003eRibbed polyurethane with signature yellow stitching\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBasket\u003c\/td\u003e\n\u003ctd\u003eStamped steel\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTerminals\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded speaker terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe KICKER CompC 10' DVC 4-ohm sub is a strong value-driven choice for anyone seeking hard-hitting, controlled bass in a budget build. It performs best in a sealed or ported enclosure with about 300 watts RMS and offers flexible wiring and decent thermal design, though buyers should weigh reported lifespan concerns against the low price.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat enclosure works best?\u003c\/strong\u003e\u003cbr\u003eA sealed or ported enclosure tuned to the vehicle and amp is recommended; the subwoofer is designed to perform well in both sealed and ported boxes when matched to about 300 watts RMS.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run this at 2 ohms?\u003c\/strong\u003e\u003cbr\u003eYes, the dual 4-ohm coils can be wired to 2 ohms for higher power applications, but ensure the amplifier and wiring are properly matched.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much power should I use?\u003c\/strong\u003e\u003cbr\u003eThe manufacturer recommends roughly 300 watts RMS and a 600 W peak handling; sticking near the RMS recommendation will balance performance and reliability.\u003c\/p\u003e","brand":"KICKER","offers":[{"title":"Default Title","offer_id":48655060861147,"sku":"B01N32B6TF","price":88.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51bHtXnyexL._SL1382.jpg?v=1778563539","url":"https:\/\/gearmusthave.com\/products\/kicker-compc-10ft-subwoofer-dvc-4-ohm-hard-hitting-bass","provider":"GearMustHave","version":"1.0","type":"link"}