{"product_id":"mikrotik-gper-gigabit-passive-ethernet-repeater-long-reach-extension","title":"Mikrotik GPeR Gigabit Passive Ethernet Repeater - Long Reach Extension","description":"\u003cp\u003eIn this review the Mikrotik GPeR is evaluated as a focused tool for extending Ethernet runs in buildings where long cable runs are unavoidable. The bottom line: installers and DIY networkers who need to stretch a CAT6 run well beyond the usual 100 m limit will appreciate the GPeR because it provides additional hops and PoE passthrough to push Ethernet up to 1,500 m in total when chained correctly. For projects in highrise or multi-apartment buildings where running new fiber is impractical, the GPeR offers a simple, passive way to reach distant devices.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtend Ethernet Reach:\u003c\/strong\u003e Adds additional hops so CAT6 cable runs can be extended incrementally to reach very distant endpoints without complete rewiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Inter-device Distance:\u003c\/strong\u003e Supports up to 210 m between two GPeR units, allowing fewer repeaters across very long vertical or horizontal runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard Cable Limits:\u003c\/strong\u003e Allows up to 100 m (and under high-quality cable up to 150 m) between the GPeR and the power source or router, keeping compatibility with typical Ethernet practices.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePoE Passthrough:\u003c\/strong\u003e For destinations that accept PoE-in, the unit can pass power through, simplifying remote device powering without separate power runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual PoE Disable:\u003c\/strong\u003e If the destination device does not support PoE-in, the passthrough can be disabled by removing jumpers, preventing accidental powering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe GPeR is best for installers, building IT staff, and advanced DIYers working in highrise or multi-apartment environments where cable distances routinely exceed 100 m and running new fiber or conduit would be costly. It is well suited to situations where multiple hops are acceptable and where compatibility with CAT6 cabling is preferred.\u003c\/p\u003e\n\u003cp\u003eIt is less appropriate for casual home users who have short runs under 100 m or for deployments that require active managed switching features; the GPeR is a passive repeater focused on reach, not switching or advanced network management.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtend cable runs in stages to reach remote endpoints without new fiber installations.\u003c\/li\u003e\n\u003cli\u003eSupports PoE passthrough to power remote PoE devices when needed.\u003c\/li\u003e\n\u003cli\u003eClear cable-length guidance (100 m typical, up to 150 m with high-quality CAT6) helps plan installs.\u003c\/li\u003e\n\u003cli\u003eAllows longer links between repeaters (up to 210 m) for flexible placement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePassive design means it is not a managed device and depends on cable quality and correct jumper configuration.\u003c\/li\u003e\n\u003cli\u003ePerformance and distances depend on CAT6 cable quality, so results vary by installation conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eMikrotik GPeR Gigabit Passive Ethernet Repeater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum total extension\u003c\/td\u003e\n\u003ctd\u003eUp to 1,500 m with chained units\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance to regular device\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;100 - 150 m per hop to standard devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistance between GPeR units\u003c\/td\u003e\n\u003ctd\u003eUp to 210 m (depending on cable quality)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable between GPeR and power source\u003c\/td\u003e\n\u003ctd\u003eUp to 100 m (high quality CAT6 up to 150 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003ePassthrough supported; can be disabled by removing jumpers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Mikrotik GPeR is a pragmatic solution for long-reach Ethernet needs in large buildings: simple to deploy, compatible with CAT6 cabling, and useful where phased extensions are required. Installers who need to push connectivity across floors or long corridors will find it good value, provided they account for cable quality and the passive nature of the device.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I chain multiple GPeR units?\u003c\/strong\u003e\u003cbr\u003eYes. The device is designed to be chained to extend Ethernet up to about 1,500 m total, with up to 210 m between GPeR units depending on cable quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need special cables or power supplies?\u003c\/strong\u003e\u003cbr\u003eNo special power supply is required when using PoE-in from a compatible source; use high-quality CAT6 if you want the maximum distances noted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if my endpoint does not support PoE?\u003c\/strong\u003e\u003cbr\u003eIf the destination device does not accept PoE-in, the GPeR PoE passthrough can be disabled manually by removing the jumpers to avoid powering the endpoint.\u003c\/p\u003e","brand":"MikroTik","offers":[{"title":"Default Title","offer_id":48617813704923,"sku":"B0843PS6J6","price":34.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/5138NplHouL._AC_SL1200.jpg?v=1778483268","url":"https:\/\/gearmusthave.com\/products\/mikrotik-gper-gigabit-passive-ethernet-repeater-long-reach-extension","provider":"GearMustHave","version":"1.0","type":"link"}