{"product_id":"nema-6-20p-to-iec-c19-10ft-power-extension-cord-heavy-duty","title":"NEMA 6-20P to IEC C19 10ft Power Extension Cord - Heavy Duty","description":"\u003cp\u003eIn this review of the NEMA 6-20P to IEC C19 10ft power extension cord, the bottom line is straightforward: this is a purpose-built cord for data center and server equipment that need a 20A 250V feed. The reviewer recommends it for anyone installing PDUs, UPS systems, or rack equipment requiring a C19 inlet because the cord uses 12 AWG oxygen-free copper conductors, a low-profile molded NEMA 6-20P, and full UL and cUL certifications which together deliver reliable high-current performance and safety. Note that this is a NEMA 6-20 plug with the prong turned 90 degrees and will not fit into a standard NEMA 5-15 outlet.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20A 250V rating:\u003c\/strong\u003e Built to carry up to 20 amps at 250 volts for(server-grade) devices that need higher current than common household cords.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e10ft length:\u003c\/strong\u003e A 10ft \/ 3m reach gives flexibility to route cables in racks and cabinets without adding excess slack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 AWG oxygen-free copper:\u003c\/strong\u003e Heavy gauge 12 AWG conductor reduces voltage drop and improves heat handling under continuous load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMolded low-profile NEMA 6-20P:\u003c\/strong\u003e The turned 90-degree prong design keeps the plug compact for tight spaces while matching NEMA 6-20 receptacles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIEC 60320 C19 connector:\u003c\/strong\u003e A molded C19 end fits high-current server and PDU inlets used in data centers and enterprise UPS gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety certifications:\u003c\/strong\u003e Carries UL and cUL listings with RoHS and REACH compliance and 100% hipot tested for reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThis cord is for IT professionals, data center technicians, and anyone installing or expanding rack power distribution where equipment specifically requires an IEC C19 inlet and a NEMA 6-20 supply. It suits servers, enterprise switches, PDUs, and UPS systems that demand 20A service and benefit from heavier 12 AWG wiring.\u003c\/p\u003e\u003cp\u003eIt is not for general household use or for devices that accept only NEMA 5-15 plugs - the NEMA 6-20P has a 90-degree prong orientation and will not fit standard 120V outlets, so casual buyers should verify their receptacle type before purchasing.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDurable 12 AWG oxygen-free copper conductors deliver stable power and reduce voltage drop under load.\u003c\/li\u003e\n\u003cli\u003eFull UL and cUL certifications plus RoHS and REACH compliance increase confidence for permanent installations.\u003c\/li\u003e\n\u003cli\u003eMolded low-profile plug and C19 connector make the cord easy to route in racks and cabinets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNot compatible with standard NEMA 5-15 outlets due to the 6-20 prong orientation, so it requires the correct 20A receptacle.\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector A\u003c\/td\u003e\n\u003ctd\u003eNEMA 6-20P (90-degree prong orientation)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector B\u003c\/td\u003e\n\u003ctd\u003eIEC 60320 C19\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e10ft \/ 3m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWire Gauge\u003c\/td\u003e\n\u003ctd\u003e12 AWG (3 x 3.31mm2)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent \/ Voltage\u003c\/td\u003e\n\u003ctd\u003e20A \/ 250V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003eOxygen-free copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertifications\u003c\/td\u003e\n\u003ctd\u003eUL, cUL, RoHS, REACH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eFor anyone fitting rack-mounted servers, PDUs, or UPS units that require a C19 inlet and 20A supply, this 10ft NEMA 6-20P to C19 cord is a practical, cost-effective choice. The 12 AWG oxygen-free copper and industry certifications make it a dependable option for permanent installations, provided the installer confirms they have the correct 6-20 receptacle.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWill this plug fit a standard wall outlet?\u003c\/strong\u003e\u003cbr\u003eNo. This is a NEMA 6-20P with the prong turned 90 degrees and will not fit a standard NEMA 5-15 outlet.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this cord safe for continuous server use?\u003c\/strong\u003e\u003cbr\u003eYes. The cord is rated 20A\/250V, uses 12 AWG oxygen-free copper, and carries UL and cUL certifications for continuous operation in rack environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat equipment commonly uses the C19 end?\u003c\/strong\u003e\u003cbr\u003eHigh-current servers, PDUs, and UPS units in data centers and enterprise racks commonly use the IEC 60320 C19 connector.\u003c\/p\u003e","brand":"Toptekits","offers":[{"title":"Default Title","offer_id":48233574695131,"sku":"B09HRRZQ61","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/41tYQ0a9LzL._AC_SL1024.jpg?v=1770840700","url":"https:\/\/gearmusthave.com\/products\/nema-6-20p-to-iec-c19-10ft-power-extension-cord-heavy-duty","provider":"GearMustHave","version":"1.0","type":"link"}