{"product_id":"nesdr-smartee-v2-bundle-rtl-sdr-low-noise-sdr-receiver","title":"NESDR SMArTee v2 Bundle RTL-SDR - Low Noise SDR Receiver","description":"\u003cp\u003eIn this review of the NESDR SMArTee v2 Bundle, the bottom line is simple: this is a practical, low-noise RTL-SDR kit for hobbyists and makers who want wideband reception without buying extra antennas. The reviewer found the combo-radio, weighted antenna base and three masts-ready to use out of the box, with an upgraded PCB and a \u003cstrong\u003e0.5PPM TCXO\u003c\/strong\u003e that improves frequency stability for tracking signals across 25MHz to 1700MHz. It is a review focused on usability and value rather than pro lab performance.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWideband reception:\u003c\/strong\u003e Covers approximately 25MHz to 1700MHz so it can receive almost any common RF signal for experimentation and monitoring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow-noise design:\u003c\/strong\u003e Redesigned PCB reduces noise by about 3dB on average, yielding clearer reception compared with earlier RTL2832U based sticks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccurate frequency reference:\u003c\/strong\u003e The ultra-low phase noise TCXO is guaranteed under 0.5PPM out of the box, improving tuning accuracy for long sessions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated bias-tee:\u003c\/strong\u003e Always-on 4.5V bias-tee with an independent ultra-low-noise supply and 250mA capability powers active antennas without driver hassles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact form factor:\u003c\/strong\u003e Same enclosure size as the SMArt series so multiple units can sit side-by-side without USB blockage on Raspberry Pi or small systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete starter bundle:\u003c\/strong\u003e Includes a quality antenna base and three antenna masts so users can begin receiving signals immediately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe NESDR SMArTee v2 Bundle is best for radio hobbyists, SDR experimenters, and makers who want a plug-and-play receiver that performs well for general monitoring, ADS-B, FM, trunking or scanning across a wide HF\/VHF\/UHF range. It suits people using Raspberry Pi or small PCs because the compact form factor prevents USB occlusion and keeps setups tidy.\u003c\/p\u003e\n\u003cp\u003eThose who need lab-grade transmit capability, professional-grade signal analysis, or receive below 25MHz should look elsewhere; likewise, users who require active-cooling setups for sustained high-power workloads should be aware this device can run warm in continuous use.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExcellent value: high sensitivity and greatly reduced noise for the price.\u003c\/li\u003e\n\u003cli\u003eStable frequency: the \u003cstrong\u003e0.5PPM TCXO\u003c\/strong\u003e improves accuracy for long recordings or frequency comparison work.\u003c\/li\u003e\n\u003cli\u003eConvenient bundle: includes a heavy antenna base and three masts so no immediate extra purchases are needed.\u003c\/li\u003e\n\u003cli\u003eBias-tee power: always-on 4.5V bias-tee with 250mA supports many active antenna options without software.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe unit can get warm during prolonged operation, which some users may want to monitor.\u003c\/li\u003e\n\u003cli\u003eNot intended for professional transmit use or frequencies below the specified ~25MHz range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eReceiver ICs\u003c\/td\u003e\n\u003ctd\u003eRTL2832U \u0026amp; R820T2 based\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency range\u003c\/td\u003e\n\u003ctd\u003eApproximately 25MHz to 1700MHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReference oscillator\u003c\/td\u003e\n\u003ctd\u003eUltra-low phase noise TCXO, \u0026lt;0.5PPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBias-tee\u003c\/td\u003e\n\u003ctd\u003eAlways-on 4.5V, independent supply, 250mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnclosure\u003c\/td\u003e\n\u003ctd\u003eAluminum, SMArt series form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBundle contents\u003c\/td\u003e\n\u003ctd\u003eSDR unit, antenna base, 3 antenna masts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003e2-year manufacturer warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe NESDR SMArTee v2 Bundle is a strong value for hobbyists and makers who want dependable wideband reception and an accurate frequency reference without buying extras. Its lower noise floor, \u003cstrong\u003e0.5PPM TCXO\u003c\/strong\u003e, integrated bias-tee and compact aluminum enclosure make it an excellent everyday SDR receiver for experiments and monitoring, provided the user accepts occasional warmth during long sessions.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it need extra antennas?\u003c\/strong\u003e\u003cbr\u003eThe bundle includes a heavy antenna base and three antenna masts, so it is ready to use for most entry and intermediate reception tasks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it power active antennas?\u003c\/strong\u003e\u003cbr\u003eYes, the integrated always-on 4.5V bias-tee supplies up to 250mA to power many active antenna designs without additional adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs frequency stability good for long recordings?\u003c\/strong\u003e\u003cbr\u003eYes, the ultra-low phase noise TCXO with under 0.5PPM initial tolerance gives superior stability compared with common 1PPM parts.\u003c\/p\u003e","brand":"NooElec","offers":[{"title":"Default Title","offer_id":48187576746203,"sku":"B079C4S2BT","price":54.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/710gwah_FzL._AC_SL1500.jpg?v=1769446362","url":"https:\/\/gearmusthave.com\/products\/nesdr-smartee-v2-bundle-rtl-sdr-low-noise-sdr-receiver","provider":"GearMustHave","version":"1.0","type":"link"}