{"product_id":"outdoor-ip65-project-enclosure-for-raspberry-pi-and-arduino","title":"Outdoor IP65 Project Enclosure for Raspberry Pi and Arduino","description":"\u003cp\u003eOur review of this Outdoor IP65 Project Enclosure finds it best suited to makers and engineers who need a compact, weather-resistant housing for small development boards. The single biggest reason to buy is the combination of an IP65-rated seal and a versatile base plate that accepts Raspberry Pi models and other single-board computers, which makes it a practical choice for long-term outdoor IoT experiments and small sensor nodes. It is sold as an unassembled kit, so buyers should be comfortable fitting standoffs and routing cables through the supplied inserts.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP65 dustproof and water-resistant:\u003c\/strong\u003e Keeps electronics protected from dust and water spray for reliable outdoor operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged plastic construction:\u003c\/strong\u003e The ABS body gives impact resistance while remaining RF-friendly for antenna placement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClear top with silicone gasket:\u003c\/strong\u003e A transparent cover lets you view status LEDs while maintaining a sealed enclosure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile base plate:\u003c\/strong\u003e Supports mounting Raspberry Pi models in multiple orientations and accepts other development boards like Arduino and NVIDIA Jetson.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded mounting hardware:\u003c\/strong\u003e Comes with standoffs, screws, fittings and mounting ears for wall or pole installation to simplify setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable-friendly design:\u003c\/strong\u003e Cable inserts and grommets allow external antennas or cable routing without compromising the seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis enclosure is ideal for hobbyists, system integrators, and field engineers building outdoor IoT nodes, camera projects, or sensor stations who need a compact, weather-resistant case for Raspberry Pi and similar boards. The kit format suits users who expect to assemble and customize their internal layout and cable routing.\u003c\/p\u003e\n\u003cp\u003eIt is less appropriate for projects needing full submersion protection or larger custom PCBs that exceed the listed internal footprint. Buyers seeking a fully assembled product or including development boards and cabling should look elsewhere.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIP65-rated sealing and a silicone gasket provide dependable protection against dust and splashing water.\u003c\/li\u003e\n\u003cli\u003eBase plate and included hardware support a range of boards and mounting orientations for flexible builds.\u003c\/li\u003e\n\u003cli\u003eABS body is RF-friendly, making internal antenna placement or cabled external antennas straightforward.\u003c\/li\u003e\n\u003cli\u003eClear top lets users monitor LEDs without opening the enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold unassembled and without development boards or cables, so additional components are required before deployment.\u003c\/li\u003e\n\u003cli\u003eIP65 protects against spray and dust but does not guarantee resistance to continuous immersion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eSixfab\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIngress rating\u003c\/td\u003e\n\u003ctd\u003eIP65 (dustproof and water-resistant)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eABS plastic (RF-friendly)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternal footprint\u003c\/td\u003e\n\u003ctd\u003eDepth 4.9 in x Width 8.3 in x Height 2.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eRaspberry Pi models, Arduino, NVIDIA Jetson, STM32, Orange Pi, Particle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eBase plate, standoffs, screws, fittings, nuts, mounting ears, cable inserts, clear top with gasket\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eFor outdoor IoT projects that need a small, robust, and adaptable enclosure, this IP65 kit is a sensible value: it protects small boards from dust and spray, offers flexible mounting options, and supports internal or cabled antennas. It is best for builders who can assemble the kit and supply their own development board and wiring.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the enclosure include a development board?\u003c\/strong\u003e\u003cbr\u003eNo, the enclosure is sold unassembled and does not include any development boards or cables.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I mount an antenna inside the case?\u003c\/strong\u003e\u003cbr\u003eYes, the ABS construction is RF-friendly and the design allows for internal antenna installation or routing external antennas through grommets.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for underwater use?\u003c\/strong\u003e\u003cbr\u003eNo, the IP65 rating protects against dust and water spray but not continuous immersion.\u003c\/p\u003e","brand":"Sixfab","offers":[{"title":"Default Title","offer_id":48652783255771,"sku":"B09TRZ5BTB","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/710k9148ijL._SL1500.jpg?v=1778727693","url":"https:\/\/gearmusthave.com\/products\/outdoor-ip65-project-enclosure-for-raspberry-pi-and-arduino","provider":"GearMustHave","version":"1.0","type":"link"}