{"product_id":"pop-tech-adhesive-pad-for-dash-cam-4pcs-heat-resistant-mounting-pads","title":"Pop-tech Adhesive Pad for Dash Cam - 4Pcs Heat Resistant Mounting Pads","description":"\u003cp\u003eIn this review of the pop-tech Adhesive Pad for Dash Cam the bottom line is simple: this 4-piece replacement kit is for drivers who need a reliable, cut-to-fit mounting solution for square dash cameras and want strong, weatherproof adhesion. Tested as a practical upgrade to worn or failing tape, the set solves camera fall-off problems by providing two larger pads for front cams and two smaller pads for rear cams, and it stands out for heat and cold resistance so the camera stays put across seasons.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-piece kit:\u003c\/strong\u003e Includes two large pads and two small pads so users can replace both front and rear dashcam mounts without searching for separate parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCut-to-fit design:\u003c\/strong\u003e Adhesive pads can be trimmed to match most square dash camera bases, allowing precise fitting for a variety of camera models.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh temperature tolerance:\u003c\/strong\u003e The 3M VHB style material resists heat up to 248F so the pad maintains strength in hot dashboards and sun-exposed windshields.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow temperature performance:\u003c\/strong\u003e Adhesion remains effective down to -40F, preventing detachment in cold climates and keeping recordings continuous.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrong double-sided adhesion:\u003c\/strong\u003e High bond glue holds through bumps and vibrations so the camera remains stable during normal driving conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy peel and install:\u003c\/strong\u003e Red film with a raised tab simplifies removal, and the grey adhesive leaves no residue when removed from the mount area.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis kit is aimed at car owners who use square dash camera bases and need a dependable replacement mount that tolerates temperature extremes and routine vehicle vibration. It is especially useful for drivers of cars, minivans, taxis, or light-duty trucks that experience direct sun on the windshield or cold overnight temperatures.\u003c\/p\u003e\n\u003cp\u003eDrivers who use round suction cup mounts should look elsewhere because these pads are not compatible with circular suction cup bases. Also, if a camera base requires a factory-specific shaped adhesive, users must confirm the pad can be trimmed to match that profile before purchasing.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes both large and small sizes so front and rear installations are covered out of the box.\u003c\/li\u003e\n\u003cli\u003eExcellent heat and cold resistance keeps cameras mounted in extreme temperatures.\u003c\/li\u003e\n\u003cli\u003eTrim-to-fit ability makes it versatile across many square dashcam models.\u003c\/li\u003e\n\u003cli\u003eRed release tab and grey adhesive that leaves no residue simplify installation and removal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNot compatible with round suction cup bases, limiting use to square mount designs.\u003c\/li\u003e\n\u003cli\u003eRequires 48 hours of cure time to reach full adhesion strength, so instant removal or adjustment is not recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003epop-tech\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit contents\u003c\/td\u003e\n\u003ctd\u003e4 adhesive pads (2 large, 2 small)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLarge pad size\u003c\/td\u003e\n\u003ctd\u003e36mm x 72mm (1.42in x 2.83in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmall pad size\u003c\/td\u003e\n\u003ctd\u003e30mm x 50mm (1.18in x 1.97in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003eWithstands up to 248F, down to -40F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003eSquare dash camera bases (not for suction cup bases)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation note\u003c\/td\u003e\n\u003ctd\u003eAllow 48 hours for maximum adhesive strength\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe pop-tech adhesive pad kit is a practical, cost-effective choice for anyone with square dash camera bases who needs durable mounting that resists heat, cold, and vibration. Its trim-to-fit flexibility and included sizes make it good value for replacing worn tape on front and rear cameras, provided buyers accept the 48-hour cure time and that it is not suitable for suction cup mounts.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this adhesive pad suitable for suction cup dashcams?\u003c\/strong\u003e\u003cbr\u003eNo. These pads are designed for square dash camera bases and do not work with round suction cup mounts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are the pad sizes included in the kit?\u003c\/strong\u003e\u003cbr\u003eThe kit includes two large pads 36mm x 72mm and two small pads 30mm x 50mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need to wait after installation?\u003c\/strong\u003e\u003cbr\u003eYes. It is recommended to let the adhesive sit for at least 48 hours to reach maximum strength before removing or stressing the mount.\u003c\/p\u003e","brand":"pop-tech","offers":[{"title":"Default Title","offer_id":46769630511323,"sku":"B0DQL4R7PF","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71P-op7SZRL._AC_SL1500.jpg?v=1747766597","url":"https:\/\/gearmusthave.com\/products\/pop-tech-adhesive-pad-for-dash-cam-4pcs-heat-resistant-mounting-pads","provider":"GearMustHave","version":"1.0","type":"link"}