{"product_id":"radial-catapult-mini-tx-cat-5-audio-snake-4-channel-analog","title":"Radial Catapult MINI TX Cat 5 Audio Snake - 4-Channel Analog","description":"\u003cp\u003eIn this review the Radial Catapult MINI TX is evaluated as a focused solution for anyone needing to move balanced analog audio across a building without bulky multicore snakes. The bottom line: the MINI TX is for engineers and performers who want a simple, passive way to send four balanced channels over a single shielded Cat 5 or Cat 6 cable, with no digital conversion or power required. It stands out because it leverages existing network cabling to deliver clean, straight-wire analog lines between rooms with minimal fuss.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003e4-channel analog transmission:\u003c\/strong\u003e Transmits four balanced audio lines over one Cat 5 or Cat 6 cable to reduce cable runs and simplify setup.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePassive straight-wire design:\u003c\/strong\u003e Uses a purely analog, passive path so there is no latency or digital conversion artifacts introduced.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePair with MINI RX:\u003c\/strong\u003e Works with the Catapult MINI RX to create a complete 4-channel snake that terminates at the destination.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eUses shielded cabling:\u003c\/strong\u003e Designed to operate over shielded Cat 5 or Cat 6 to help maintain signal integrity in electrically noisy environments.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFlexible deployment:\u003c\/strong\u003e Can leverage a building's pre-existing Ethernet infrastructure to route audio between rooms without running new multicore cable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThe MINI TX is ideal for small venues, rehearsal spaces, broadcast booths, and studios where running a low-profile Cat 5 or Cat 6 between locations is easier than a bulky analog snake. Live sound techs who need a compact transmitter to send four mic or line signals to a remote stage or FOH will appreciate its simplicity and passive operation.\u003c\/p\u003e\n\n\u003cp\u003eUsers who require long digital runs, sample-accurate multitrack capture, or remote power over Ethernet should look elsewhere, since the MINI TX is an analog, passive module and does not perform digital conversion or network audio transport.\u003c\/p\u003e\n\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eCompact, unobtrusive form that turns a single Cat 5\/6 run into four balanced channels.\u003c\/li\u003e\n \u003cli\u003ePassive straight-wire design keeps signal path analog and free of digital latency.\u003c\/li\u003e\n \u003cli\u003eCompatible with existing building Ethernet when shielded cable is available, making deployment flexible.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eDoes not provide any conversion to digital formats or network audio protocols, limiting use cases to analog transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eCatapult MINI TX\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e4 analog channels\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCable type\u003c\/td\u003e\n\u003ctd\u003eShielded Cat 5 or Cat 6\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOperation\u003c\/td\u003e\n\u003ctd\u003ePassive straight-wire analog\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCompanion unit\u003c\/td\u003e\n\u003ctd\u003eCatapult MINI RX\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eUse case\u003c\/td\u003e\n\u003ctd\u003eTransmit balanced audio between rooms or locations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Radial Catapult MINI TX is a practical, no-frills analog transmitter for anyone who needs to route four balanced channels over a single Cat 5 or Cat 6 run. It represents good value when you want a passive, low-latency solution that pairs with the MINI RX and uses existing cabling, though it is not a substitute for digital or networked audio systems.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use an unshielded Cat 5 cable?\u003c\/strong\u003e\u003cbr\u003eRadial specifies shielded Cat 5 or Cat 6 to preserve signal integrity; unshielded cable may increase noise in electrically noisy environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the MINI TX require power?\u003c\/strong\u003e\u003cbr\u003eNo, the MINI TX operates as a passive straight-wire analog transmitter and does not need external power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need the MINI RX?\u003c\/strong\u003e\u003cbr\u003eYes, the MINI RX is required at the destination to convert the Cat 5\/6 conductors back to four balanced audio outputs.\u003c\/p\u003e","brand":"Radial Engineering","offers":[{"title":"Default Title","offer_id":48749822378203,"sku":"B07FT6YWDH","price":124.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71PZFrSwFTL._AC_SL1500.jpg?v=1778838119","url":"https:\/\/gearmusthave.com\/products\/radial-catapult-mini-tx-cat-5-audio-snake-4-channel-analog","provider":"GearMustHave","version":"1.0","type":"link"}