{"product_id":"space-pi-filament-dryer-plus-dual-spool-360-hot-air-dehydrator","title":"Space Pi Filament Dryer Plus - Dual Spool 360 Hot-air Dehydrator","description":"\u003cp\u003eOur review of the Space Pi Filament Dryer Plus finds it best suited to hobbyists and makers who run two printers or need to keep two spools ready at once; the defining reason to buy is the dual-roll capacity combined with true PTC hot-air circulation that aims to deliver uniform drying. The unit is practical and easy to use, with a bright 4-inch touch screen and presets for many materials, and it addresses common filament moisture problems without forcing users into complex setups.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo Rolls Capacity Design:\u003c\/strong\u003e Holds two 1 kg spools and routes filament out through four holes with PTFE pipes so two printers can draw filament while both spools stay dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble PTC 360 Hot-air Heating:\u003c\/strong\u003e Built-in fan circulates warm air all around the spools for more even drying than surface heating alone, reducing moisture-related print failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced PTC Heating Technology:\u003c\/strong\u003e An 80W PTC heater provides steady, energy-efficient warmth that aims for consistent drying across the storage chamber.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCD Touch Screen:\u003c\/strong\u003e A 4-in touch display simplifies monitoring and changing settings so operators can track drying progress without guessing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast Filament Selection:\u003c\/strong\u003e Twelve preset material profiles cover common and composite filaments and allow temperature adjustment between 45C and 70C for flexible use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-off Memory:\u003c\/strong\u003e The dryer remembers material and temperature after a power interruption so long drying sessions resume without reconfiguration.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThe Space Pi Dryer Plus is aimed at serious hobbyists, small workshop owners, and makers who regularly print with moisture-sensitive materials and want to maintain two spools or feed two machines. It works well for users who value automated presets, a clear touch interface, and the convenience of PTFE feed tubes so prints can continue while drying is in progress.\u003c\/p\u003e\u003cp\u003eThose who should look elsewhere include single-spool users on a strict budget who rarely print with hygroscopic filaments, and users who need industrial-scale drying capacity for many spools simultaneously, as this model focuses on two-spool convenience rather than large-scale storage.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual-spool layout and four feed holes enable drying and simultaneous feeding to two printers.\u003c\/li\u003e\n\u003cli\u003e80W PTC heater plus 360-degree fan circulation promotes more uniform drying than typical pad heaters.\u003c\/li\u003e\n\u003cli\u003eEasy operation with a 4-in touch screen and presets for up to 12 filament types.\u003c\/li\u003e\n\u003cli\u003eMemory function restores settings after power loss for uninterrupted long drying cycles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDoes not include filament spools and is intended for 1 kg sizes only, so users must supply compatible spools.\u003c\/li\u003e\n\u003cli\u003eSome users report mixed overall filament quality or clogging with certain filaments, which is outside the dryer but worth noting when troubleshooting prints.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e\n\u003ctd\u003eTwo 1 kg spools\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeating\u003c\/td\u003e\n\u003ctd\u003eDouble PTC 360 hot-air with built-in fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater Power\u003c\/td\u003e\n\u003ctd\u003e80W PTC heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScreen\u003c\/td\u003e\n\u003ctd\u003e4-in LCD touch screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e45C to 70C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimer\u003c\/td\u003e\n\u003ctd\u003e0 to 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilament Diameters\u003c\/td\u003e\n\u003ctd\u003e1.75 mm and 2.85 mm (compatible)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe Space Pi Filament Dryer Plus is a smart choice for makers who need to keep two spools dry and ready, offering consistent drying thanks to an 80W PTC heater and 360-degree airflow, plus convenient presets and a clear touch interface. For its price and feature set it delivers solid value to dual-printer setups and frequent users of moisture-sensitive filaments, though filament quality issues from third-party spools can still affect results.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan it run two printers at once?\u003c\/strong\u003e\u003cbr\u003eYes, the unit includes four filament outlets with PTFE tubes so two printers can draw filament while spools remain inside the dryer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat filament diameters are supported?\u003c\/strong\u003e\u003cbr\u003eThe dryer supports both 1.75 mm and 2.85 mm filament diameters as indicated in the product details.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it remember settings after a power cut?\u003c\/strong\u003e\u003cbr\u003eYes, the power-off memory function restores the previous material and temperature settings so drying can resume without reconfiguration.\u003c\/p\u003e","brand":"Creality","offers":[{"title":"Default Title","offer_id":48260106879195,"sku":"B0CTCCCRHF","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/51E4EugkgOL._AC_SL1000.jpg?v=1778316353","url":"https:\/\/gearmusthave.com\/products\/space-pi-filament-dryer-plus-dual-spool-360-hot-air-dehydrator","provider":"GearMustHave","version":"1.0","type":"link"}