{"product_id":"space-pi-filament-dryer-plus-dual-spool-fast-even-drying","title":"Space Pi Filament Dryer Plus Dual Spool - Fast, Even Drying","description":"\u003cp\u003eIn this review the Creality Space Pi Filament Dryer Plus is evaluated for hobbyists and small shops that need reliable filament conditioning before prints. The bottom line: it is best for users who store multiple spools and want a hassle-free way to remove moisture, thanks to the \u003cstrong\u003eone-key drying presets\u003c\/strong\u003e and visible monitoring. Setup is straightforward and the unit's combination of a PTC heater and built-in fan delivers even circulation, making it a practical addition for anyone chasing consistent print quality.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne-Key Settings:\u003c\/strong\u003e Pre-configured temperature and drying time for up to 12 filament types simplifies setup and reduces guesswork for different materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable Temperature:\u003c\/strong\u003e Temperature control from 45C to 70C lets users fine tune drying for sensitive or heat-tolerant filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360 Hot-Air Circulation:\u003c\/strong\u003e An 80W PTC heater plus a built-in fan provides uniform airflow to remove moisture evenly across two spools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e48-Hour Timer:\u003c\/strong\u003e Drying time adjustable from 0 to 48 hours ensures thorough moisture removal for larger or wetter spools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal-Time Monitoring:\u003c\/strong\u003e The 4 in LCD touch screen displays temperature and humidity so users can track filament condition without opening the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-Off Memory:\u003c\/strong\u003e Automatic memory of previous settings prevents reconfiguration after power interruptions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThe Space Pi Filament Dryer Plus is aimed at desktop manufacturers, serious hobbyists, and small print shops that use a variety of materials such as PLA, PETG, ABS, Nylon and composites and need dependable drying for two spools at once. The clear display and one-key presets make it useful for makers who want consistency without manual trial and error.\u003c\/p\u003e\u003cp\u003eIt is less suitable for very large industrial filament stores or users who need more than two spools dried simultaneously; those operations will require larger-capacity solutions. Casual users who rarely print or only print with filament kept perfectly dry may find the feature set more than they need.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEven drying from \u003cstrong\u003e360 hot-air circulation\u003c\/strong\u003e improves print reliability across spool cores and outer layers.\u003c\/li\u003e\n\u003cli\u003eConvenient \u003cstrong\u003eone-key drying presets\u003c\/strong\u003e and adjustable 45C-70C temperature range make material setup fast and repeatable.\u003c\/li\u003e\n\u003cli\u003eClear \u003cstrong\u003e4 in LCD touch screen\u003c\/strong\u003e with humidity and temperature readout allows continuous monitoring without interrupting the cycle.\u003c\/li\u003e\n\u003cli\u003ePower-off memory adds practical resilience against interruptions during long drying runs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCapacity limited to two spools, so it is not ideal for high-volume or multi-coil inventory management.\u003c\/li\u003e\n\u003cli\u003eInput voltage listed at 110V 50\/60Hz in the specification may require verification for regions with different mains standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eDual-spool filament dryer box\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported filament diameters\u003c\/td\u003e\n\u003ctd\u003e1.75 mm and 2.85 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature range\u003c\/td\u003e\n\u003ctd\u003e45C to 70C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeater power\u003c\/td\u003e\n\u003ctd\u003e80W PTC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimer\u003c\/td\u003e\n\u003ctd\u003e0 to 48 hours adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay\u003c\/td\u003e\n\u003ctd\u003e4 in LCD touch screen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput voltage\u003c\/td\u003e\n\u003ctd\u003e110V 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe Space Pi Filament Dryer Plus is a practical, well-built choice for makers who need reliable drying for two spools and clear status feedback. Its combination of \u003cstrong\u003epreset drying modes\u003c\/strong\u003e, 360-degree airflow, and real-time humidity readout delivers better filament consistency and reduces print failures, making it good value for small shops and dedicated hobbyists.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan it dry different filament types at once?\u003c\/strong\u003e\u003cbr\u003eYes, it supports multiple filament types and the presets cover up to 12 materials, but best results are achieved when similar materials and moisture levels are run together.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes the display show humidity during a cycle?\u003c\/strong\u003e\u003cbr\u003eYes, the 4 in LCD touch screen displays real-time humidity and temperature so you can monitor conditions without opening the box.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it remember settings after a power cut?\u003c\/strong\u003e\u003cbr\u003eYes, the unit has a power-off memory function that restores previous settings after power is restored.\u003c\/p\u003e","brand":"CREALITY FALCON","offers":[{"title":"Default Title","offer_id":48609188315355,"sku":"B0DYTXYPK2","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61pn-haSsSL._AC_SL1500.jpg?v=1778377854","url":"https:\/\/gearmusthave.com\/products\/space-pi-filament-dryer-plus-dual-spool-fast-even-drying","provider":"GearMustHave","version":"1.0","type":"link"}