{"product_id":"stewmac-fret-puller-tool-precise-fret-removal-with-reduced-chip-out","title":"StewMac Fret Puller Tool - Precise Fret Removal with Reduced Chip-Out","description":"\u003cp\u003eIn this review the StewMac Fret Puller Tool is evaluated as a focused workshop implement for guitar and bass techs who need a reliable, non-cutting way to remove frets. The bottom line: this tool exists solely to pull frets and does that one job well. Its spring-loaded, flush-ground 1\/2' jaws and rubber-coated handles give a controlled grip that helps reduce wood chip-out and get under radiused frets more cleanly than wider cutters, making it worth considering for anyone who performs fretwork regularly.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecialized 1\/2' jaws:\u003c\/strong\u003e The narrow jaws are small enough to get a better bite under radiused frets for a gentler lift.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpring-loaded action:\u003c\/strong\u003e The return spring speeds repetitive pulls and keeps the jaws aligned for consistent performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlush-ground edges:\u003c\/strong\u003e Ground jaw faces minimize slipping and provide a secure contact point under the fret tang.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-coated handles:\u003c\/strong\u003e Comfortable grips reduce hand fatigue during longer refrets and give better control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on stainless frets:\u003c\/strong\u003e The tool is suitable for modern stainless-steel fretwire and does not prematurely wear in normal shop use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis is aimed at luthiers, repair techs, and experienced hobbyists who do full or partial refrets and prefer a dedicated tool for clean removal. If you frequently work with radiused fretboards or stainless fretwire, the narrow 1\/2' jaws and spring action make repetitive removal easier and help protect the wood.\u003c\/p\u003e\n\u003cp\u003eIt is not for those who expect a multi-purpose cutter or a tool that trims tangs or performs finishing; it does not cut frets. Beginners with only infrequent fret needs might prefer a more general-purpose plier until they take on regular refret work.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNarrow 1\/2' jaws provide a better bite under radiused frets for cleaner lifts.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded, flush-ground design reduces wood chip-out compared with wider cutters.\u003c\/li\u003e\n\u003cli\u003eComfortable rubber-coated handles make repeated pulls less tiring.\u003c\/li\u003e\n\u003cli\u003eCompatible with stainless-steel fretwire used in modern instruments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned only for pulling frets and not for cutting or trimming tangs, so you may need additional tools for a full refret job.\u003c\/li\u003e\n\u003cli\u003eThe single-purpose design may be unnecessary for casual users who rarely remove frets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003ePulling frets only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJaw width\u003c\/td\u003e\n\u003ctd\u003e1\/2' narrow jaws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJaw finish\u003c\/td\u003e\n\u003ctd\u003eFlush-ground\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAction\u003c\/td\u003e\n\u003ctd\u003eSpring-loaded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHandle\u003c\/td\u003e\n\u003ctd\u003eRubber-coated for comfort\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial compatibility\u003c\/td\u003e\n\u003ctd\u003eSuitable for stainless-steel fretwire\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe StewMac Fret Puller Tool is a worthwhile single-purpose investment for anyone who regularly removes frets and wants to reduce wood chip-out and improve control under radiused frets. It is good value for workshop use when paired with the cutting and finishing tools needed for a complete refret, but it is not intended to replace nippers or files.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan this tool cut or trim frets?\u003c\/strong\u003e\u003cbr\u003eNo. This tool is designed only for pulling frets and does not cut or trim fret tangs; separate nippers or cutters are required for that work.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill it work on stainless-steel fretwire?\u003c\/strong\u003e\u003cbr\u003eYes. The tool is suitable for modern stainless-steel fretwire and StewMac notes typical use does not cause premature wear of files or sandpaper.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it suitable for radiused fingerboards?\u003c\/strong\u003e\u003cbr\u003eYes. The 1\/2' narrow jaws are small enough to get a better bite under radiused frets and help lift them cleanly.\u003c\/p\u003e","brand":"StewMac","offers":[{"title":"Default Title","offer_id":48263783416027,"sku":"B01HUDDUOC","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71wxnmEnhHL._AC_SL1500.jpg?v=1778268536","url":"https:\/\/gearmusthave.com\/products\/stewmac-fret-puller-tool-precise-fret-removal-with-reduced-chip-out","provider":"GearMustHave","version":"1.0","type":"link"}