{"product_id":"szrmcc-hirose-4-pin-male-to-np-f970-dummy-battery-review","title":"SZRMCC Hirose 4 Pin to NP-F970 Dummy Battery - 12V Adapter","description":"\u003cp\u003eIn this review of the SZRMCC Hirose 4 Pin Male to NP-F970 Dummy Battery cable, the bottom line is clear: it is a practical, purpose-built solution for shooters who need to power Sony L-series battery devices from a camera or external 12V Hirose port. The reviewer found it most valuable for running Atomos Shogun, Ninja Inferno or similar monitors from an ARRI AMIRA or Sony F5\/F55 camera Hirose 4 pin output. It is not a real lithium battery but a dummy NP-F970 pack that accepts an 8V power feed from the cable, and it performs reliably when used within the stated voltage range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e Fits Sony NP-F970, NP-F750 and NP-F550 battery slots so your monitor or accessory reads a standard L-series battery connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHirose 4 Pin Input:\u003c\/strong\u003e The Hirose 4 pin male plug allows direct connection to camera 12V-16V Hirose ports for a tidy on-camera power route.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe Output:\u003c\/strong\u003e The dummy battery provides about an 8V 2A output to the device, matching the power expectations of many L-series powered monitors and accessories.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength and flexibility:\u003c\/strong\u003e The 39in\/1m cable keeps the monitor and camera properly spaced on rigs, and SZRMCC can customize length on request for bespoke setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality control:\u003c\/strong\u003e Each cable is rigorously tested and built by a connector and cable manufacturer, which helps ensure consistent connections on professional shoots.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWho It's For\u003c\/h2\u003e\u003cp\u003eThis cable is aimed at videographers and camera operators who want to power external monitors such as Atomos Shogun or Ninja Inferno from a camera Hirose 4 pin 12V output, or who need a dummy NP-F970 pack to run L-series devices without swapping batteries. It suits production environments where tidy, durable cabling and compatibility with ARRI AMIRA or Sony F5\/F55 camera power ports matter.\u003c\/p\u003e\u003cp\u003eIt is not for users who expect a true lithium battery or who want higher-than-stated voltage to the dummy pack. If you need more than 16V at the Hirose input or require a real rechargeable battery, look for a dedicated battery solution rather than a dummy adapter cable.\u003c\/p\u003e\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides a neat way to power L-series devices from a camera Hirose 4 pin port without battery swaps.\u003c\/li\u003e\n\u003cli\u003eCable length of 39in\/1m balances reach and manageability on rigs, with custom lengths available.\u003c\/li\u003e\n\u003cli\u003eManufacturer testing and build quality reduce risk of intermittent connections during shoots.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt is a dummy battery, not a real lithium pack, so it requires an appropriate 12V-16V Hirose source and will not charge batteries.\u003c\/li\u003e\n\u003cli\u003eThe dummy output is about 8V 2A, which may not suit accessories that need higher current or different voltages.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eNP-F970 Dummy Battery Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Connector\u003c\/td\u003e\n\u003ctd\u003eHirose 4 pin male\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connector\u003c\/td\u003e\n\u003ctd\u003eSony NP-F970\/NP-F750\/NP-F550 dummy battery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Length\u003c\/td\u003e\n\u003ctd\u003e39in \/ 1m (customizable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage Range\u003c\/td\u003e\n\u003ctd\u003eAbout 12V - 16V Hirose input\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDummy Battery Output\u003c\/td\u003e\n\u003ctd\u003eAbout 8V 2A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSZRMCC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eOur Verdict\u003c\/h2\u003e\u003cp\u003eThe SZRMCC Hirose 4 Pin to NP-F970 dummy battery cable is a pragmatic, well-built accessory for professionals who need to power L-series monitor devices from a camera Hirose port. It offers reliable connections, a sensible cable length and manufacturer testing that make it good value for productions that already provide a compatible 12V source. Do not buy this expecting a rechargeable battery or higher output than the listed 8V 2A.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eCan this cable charge real NP-F batteries?\u003c\/strong\u003e\u003cbr\u003eNo. This is a dummy battery adapter that provides an 8V output to power devices; it does not charge lithium NP-F batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat voltage should the camera Hirose port supply?\u003c\/strong\u003e\u003cbr\u003eUse a Hirose 4 pin input around 12V to 16V; do not exceed 16V to avoid damage.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the cable length fixed?\u003c\/strong\u003e\u003cbr\u003eThe standard length is 39in\/1m, and SZRMCC can customize other lengths on request.\u003c\/p\u003e","brand":"SZRMCC","offers":[{"title":"Default Title","offer_id":48137222815963,"sku":"B085NQH276","price":36.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/61JNgE374EL._AC_SL1200.jpg?v=1768338700","url":"https:\/\/gearmusthave.com\/products\/szrmcc-hirose-4-pin-male-to-np-f970-dummy-battery-review","provider":"GearMustHave","version":"1.0","type":"link"}