{"product_id":"t-molding-3-4-in-wide-fire-engine-red-t-moulding-250-ft-coil","title":"T Molding 3\/4 in Wide Fire Engine Red T-Moulding - 250 ft Coil","description":"\u003cp\u003eIn this review the Outwater Fire Engine Red T-molding is evaluated for DIYers and light commercial shops who need a long-run, impact-resistant edge trim for 3\/4 in panels. The single biggest reason to buy is the 250 ft commercial coil in a vivid semi-gloss red that is dyed through the polyethylene so color stays consistent even with heavy use. Installation is straightforward when the panel kerf matches the center barb, and the flexible material allows the strip to follow gentle curves for arcade cabinets, countertops, and tabletops.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits 3\/4 in panels:\u003c\/strong\u003e The profile is designed specifically for 3\/4 in thick panels so it locks into standard tabletop and cabinet edges when the slot width matches the barb.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCenter barb slot requirement:\u003c\/strong\u003e The molded center barb requires a.065 in slot tolerance up to.078 in, and small gaps can be corrected by adding tape to the barb for a snug fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible polyethylene:\u003c\/strong\u003e Made from tough, flexible polyethylene so the molding contours to slightly curved surfaces without cracking or splitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSemi-gloss dyed color:\u003c\/strong\u003e The fire engine red is dyed solid through the material so the finish will not rub or wash off during normal use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommercial length:\u003c\/strong\u003e One 250 ft roll provides long continuous runs for multiple projects and reduces the need for joints on commercial installations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Constructed from 100% non-phthalate polyethylene for impact protection and heavy use in public or home environments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis T-molding is best for hobbyists building arcade cabinets, shop owners trimming counters, or contractors finishing tables and shelving who need a long coil of a single, vivid color. The flexible material and 250 ft quantity make it a good fit for projects that require continuous trim runs or repeated small jobs.\u003c\/p\u003e\n\u003cp\u003ePeople who should look elsewhere are those who need a different profile for panels other than 3\/4 in thick, or installers who cannot create or correct a.065 in slot; if the kerf is far larger than.078 in the barb will not hold well without additional anchoring or adhesive.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid-dyed polyethylene retains color and resists surface wear in high-traffic applications.\u003c\/li\u003e\n\u003cli\u003e250 ft coil provides plenty of material to avoid seams on long runs and multiple projects.\u003c\/li\u003e\n\u003cli\u003eFlexible enough to conform to gentle curves, useful on arcade cabinets and rounded counters.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRequires a.065 in slot (up to.078 in); if the existing kerf is too large the barb may sit loosely and need tape or adhesive to secure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProfile fit\u003c\/td\u003e\n\u003ctd\u003e3\/4 in thick panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSlot requirement\u003c\/td\u003e\n\u003ctd\u003e.065 in (tolerance up to.078 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlexible polyethylene (100% non-phthalate)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor \/ Finish\u003c\/td\u003e\n\u003ctd\u003eFire engine red, semi-gloss, dyed solid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e250 ft coil\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMade in\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe Outwater Fire Engine Red T-molding is a practical choice for builders and shops needing a long, durable roll of vivid edge trim that fits 3\/4 in panels. It offers good value thanks to the 250 ft length, solid-dyed color, and flexible polyethylene construction; just confirm or prepare the correct.065 in slot to ensure a secure fit or plan to use adhesive where needed.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWill this fit a panel that is exactly 3\/4 in thick?\u003c\/strong\u003e\u003cbr\u003eYes, the profile is made to fit 3\/4 in panels; ensure the cut slot is about.065 in (up to.078 in tolerance) for the center barb.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used on curved surfaces?\u003c\/strong\u003e\u003cbr\u003eYes, the flexible polyethylene will contour to gentle curves such as rounded cabinet edges and arcade cabinet fronts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I secure it if the slot is too large?\u003c\/strong\u003e\u003cbr\u003eIf the kerf exceeds.078 in, add masking tape to the barb or use caulk\/adhesive during installation for a snug, lasting fit.\u003c\/p\u003e","brand":"OUTWATER","offers":[{"title":"Default Title","offer_id":48670575624411,"sku":"B07NPQGMHT","price":128.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/414Aj4nUaSL._AC_SL1482.jpg?v=1778687523","url":"https:\/\/gearmusthave.com\/products\/t-molding-3-4-in-wide-fire-engine-red-t-moulding-250-ft-coil","provider":"GearMustHave","version":"1.0","type":"link"}