{"product_id":"temco-10-awg-solar-cable-150-ft-made-in-usa-pv-wire","title":"TEMCo 10 AWG Solar Cable 150 ft - Made in USA PV Wire","description":"\u003cp\u003eIn this review the TEMCo 10 AWG PV solar cable earns its place for installers and DIYers who need a straightforward, rugged conductor for photovoltaic systems. The single biggest reason to buy is that it is a Made in the USA, 19-strand pure copper PV wire that meets UL 4703 and is direct burial rated, which makes it a reliable, code-friendly choice for array runs and outdoor wiring. The review focuses on real-world handling, electrical ratings, and the build quality that matters during installation.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eMade in the USA:\u003c\/strong\u003e Manufactured domestically to consistent quality standards so buyers get a traceable PV cable for solar installations.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e19-strand pure copper:\u003c\/strong\u003e The stranded copper conductor delivers reliable conductivity and enough flexibility to route through trays and conduit without using CCA.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003e600 VDC, 50 amps rating:\u003c\/strong\u003e Electrical ratings suit many residential and small commercial PV circuits when sized correctly.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eXLPE insulation:\u003c\/strong\u003e Cross-linked polyethylene resists heat, UV, chemicals, and abrasion for long-term outdoor exposure.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDirect burial rated:\u003c\/strong\u003e Can be run above ground, in conduit, or buried without additional inner conduit protection where local code allows.\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003ePhysical dimensions:\u003c\/strong\u003e Nominal outside diameter of 0.230 in and about 17.54 ft per pound, providing a tangible sense of heft during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis cable is best for solar installers, electricians, and serious DIY homeowners who prioritize a pure copper conductor and a UL 4703 certified PV wire that can be buried or run outdoors. It suits typical residential arrays and many small commercial applications where a 10 AWG conductor and 600 VDC rating are sufficient.\u003c\/p\u003e\n\u003cp\u003eThose needing ultra-flexible, lightweight wire for tight bends or very long DC runs should look at alternative gauge or stranded constructions; likewise projects requiring higher ampacity or voltages must specify a larger gauge or different cable type.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eAmerican-made construction and UL 4703 compliance provide confidence in safety and traceability.\u003c\/li\u003e\n \u003cli\u003eStranded pure copper offers dependable conductivity and practical flexibility for routing.\u003c\/li\u003e\n \u003cli\u003eXLPE insulation and direct burial rating mean it handles outdoor exposure and underground runs without extra protection.\u003c\/li\u003e\n \u003cli\u003eClear electrical ratings (600 VDC, 50 A) simplify system planning for typical PV circuits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n \u003cli\u003eNot the most flexible 10 AWG cable; some users report it is semi-stiff and can tangle when uncoiled.\u003c\/li\u003e\n \u003cli\u003eThicker gauge and weight may be cumbersome on very long runs compared with lighter alternatives.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctr\u003e\n\u003ctd\u003eConductor\u003c\/td\u003e\n\u003ctd\u003e19-strand pure copper (no CCA)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage Rating\u003c\/td\u003e\n\u003ctd\u003e600 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCurrent Rating\u003c\/td\u003e\n\u003ctd\u003e50 amps\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eInsulation\u003c\/td\u003e\n\u003ctd\u003eXLPE (Cross-Linked Polyethylene)\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTemperature Range\u003c\/td\u003e\n\u003ctd\u003e-40C to 90C\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e150 ft\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eOutside Diameter\u003c\/td\u003e\n\u003ctd\u003e0.230 in (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe TEMCo 10 AWG PV solar cable is a practical, good-value choice for most residential and light commercial PV installations where a pure copper, UL 4703 certified, direct burial cable is required. It pairs dependable electrical ratings and rugged XLPE insulation with the reassurance of domestic manufacture, making it a solid pick for installers who value durability and code compliance.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIs this cable suitable for underground burial?\u003c\/strong\u003e\u003cbr\u003eYes. The wire is direct burial rated and may be buried without additional inner conduit where local code permits.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan it be used for 600 V systems?\u003c\/strong\u003e\u003cbr\u003eYes. The cable is rated to 600 VDC, so it is appropriate for many PV system configurations within that voltage limit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow flexible is the 10 AWG TEMCo wire?\u003c\/strong\u003e\u003cbr\u003eIt is semi-flexible due to the 19-strand construction and pure copper; easier to route than solid wire but not as supple as finer-stranded alternatives.\u003c\/p\u003e","brand":"TEMCo Industrial","offers":[{"title":"Default Title","offer_id":48201975464155,"sku":"B08ML3TNP9","price":91.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/517ziNYWgaL.jpg?v=1770231722","url":"https:\/\/gearmusthave.com\/products\/temco-10-awg-solar-cable-150-ft-made-in-usa-pv-wire","provider":"GearMustHave","version":"1.0","type":"link"}