{"product_id":"wide-band-2-way-splitter-3db-n-type-female-50-ohm-cellular-signal","title":"Wide-Band 2 Way Splitter 3dB N Type Female 50 Ohm - Cellular Signal","description":"\u003cp\u003eIn this review of the Wide-Band 2 Way Splitter-3dB N Type Female-50 Ohm by XRDS-RF, the bottom line is simple: this is a focused tool for splitting a cellular antenna feed into two equal outputs without complicated adapters. Installers and DIYers working on 4G\/LTE systems will appreciate that it is built to the right impedance and connector type, and it avoids TV or cable use by design. The review finds it most valuable for projects that need a clean, passive split of a single antenna feed to two receivers or amplifiers while preserving the expected 50 ohm matching.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide-band operation:\u003c\/strong\u003e Covers cellular frequency ranges so one splitter can serve multiple 4G\/LTE bands without retuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN type female connectors:\u003c\/strong\u003e Provides a robust, weather-resistant connection option suited to professional antenna hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 dB split:\u003c\/strong\u003e Delivers an equal power split to two outputs, which is the predictable choice for sharing a single feed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 ohm impedance:\u003c\/strong\u003e Matches standard cellular antennas and equipment to minimize reflections and signal loss from impedance mismatch.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive design:\u003c\/strong\u003e Requires no power or configuration, making it a simple, low-maintenance component in RF systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWho It's For\u003c\/h2\u003e\n\u003cp\u003eThis splitter is aimed at technicians, installers, and hobbyists building or modifying 4G\/LTE cellular systems who need a reliable passive method to feed two receivers or amplifiers from one antenna. It is particularly useful in sites where N type connections are already installed and where maintaining a 50 ohm system is important.\u003c\/p\u003e\n\u003cp\u003eThose who should look elsewhere include users seeking a TV or cable splitter, since this product is explicitly not for TV use, and anyone who needs an amplified splitter or active signal combining, as this unit is passive and does not boost signal strength.\u003c\/p\u003e\n\u003ch2\u003ePros \u0026amp; Cons\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePros\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSimple passive 3 dB split gives predictable, equal outputs for two devices without needing power.\u003c\/li\u003e\n\u003cli\u003eN type female connectors fit professional cellular antenna hardware and provide weather-tolerant mating.\u003c\/li\u003e\n\u003cli\u003e50 ohm impedance and wide-band coverage make it compatible with multiple 4G\/LTE bands in one device.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCons\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePassive splitting reduces signal level by about 3 dB per path, so it cannot replace an amplifier where gain is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct name\u003c\/td\u003e\n\u003ctd\u003eWide-Band 2 Way Splitter-3dB N Type Female-50 Ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eXRDS-RF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector type\u003c\/td\u003e\n\u003ctd\u003eN type female\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpedance\u003c\/td\u003e\n\u003ctd\u003e50 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSplit loss\u003c\/td\u003e\n\u003ctd\u003e3 dB per output (passive)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eCellular 4G\/LTE systems (not for TV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\u003ch2\u003eOur Verdict\u003c\/h2\u003e\n\u003cp\u003eThe XRDS-RF Wide-Band 2 Way Splitter is a practical, no-nonsense component for anyone building or maintaining a 4G\/LTE antenna feed that needs to be shared. It delivers reliable 50 ohm matching and rugged N type connections for professional setups, and offers clear value where a passive, equal split is required. Do not buy it if you need active amplification or a TV-compatible splitter.\u003c\/p\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCan I use this splitter for TV or cable signals?\u003c\/strong\u003e\u003cbr\u003eThis product is designed for cellular 4G\/LTE and is not intended or optimized for TV or cable use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the splitter require power or setup?\u003c\/strong\u003e\u003cbr\u003eNo, it is a passive device and requires no power or configuration; you simply connect the antenna and the two outputs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill this boost my signal?\u003c\/strong\u003e\u003cbr\u003eNo, a passive 3 dB splitter divides the signal and does not provide amplification; use an amplifier if you need increased signal strength.\u003c\/p\u003e","brand":"XRDS -RF","offers":[{"title":"Default Title","offer_id":48175451341019,"sku":"B07V6YH8BV","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1043\/1707\/files\/71RDhQPdT1L._AC_SL1500.jpg?v=1769569312","url":"https:\/\/gearmusthave.com\/products\/wide-band-2-way-splitter-3db-n-type-female-50-ohm-cellular-signal","provider":"GearMustHave","version":"1.0","type":"link"}