1-1/4 in x 100 ft Blue PVC Pool Backwash and Discharge Hose - Heavy

In this review the 1-1/4 in x 100 ft Blue PVC Backwash and Discharge Hose is evaluated for homeowners and pool service professionals who need a long, durable hose for draining and backwashing pools. The bottom line: this hose stands out for its reinforced PVC construction and heavy duty aluminum pin lug fittings, which make it a dependable choice when moving large volumes of water with a sump or trash pump. Readers will appreciate the clear, practical strengths and a few user-noted limits explained below.

Key Features

• Size and reach: The 1-1/4 in diameter and full 100 ft length provide ample reach for typical in-ground and above-ground pool emptying without the need to splice sections.
• Reinforced construction: Flexible PVC with continuous high tensile polyester yarn woven through it helps resist tears and punctures for longer service life.
• Chemical resistance: The PVC material and fittings resist oils, grease, acids and many pool chemicals so the hose is suitable for pool-related cleanup tasks.
• Heavy duty fittings: Aluminum pin lug fittings reduce the risk of oxidation and rust compared with plain metal connectors, improving connector longevity.
• Wide temperature range: Rated for 23F to 149F (-5C to 65C), the hose can be used seasonally in most climates without stiffness or failure within that range.

Who It's For

This hose is best for homeowners who need a single long hose for routine pool backwash, draining, or emergency sump pump duties, and for pool service pros who prefer a reinforced flat discharge hose that rolls up compactly for transport. The included pin lug fittings make it practical for use with standard pumps and trash pumps used in pool maintenance.

It is less suited to jobs that require higher pressure than the 90 PSI working rating or where threaded specialty fittings are mandatory; users needing a smaller diameter, permanently buried line, or a hose rated for very cold or very hot extremes beyond the stated temperature range should consider other options.

Pros & Cons

Pros

• Good length and diameter combination for full pool drains and long runs without connectors.
• Reinforced PVC construction resists tears and performs well under normal pump loads.
• Aluminum pin lug fittings reduce corrosion risk and make hookup straightforward.

Cons

• Some users report leakage developing at the connectors, so clamps and proper seating are important during installation.
• Working pressure is 90 PSI, which is adequate for most pumps but not for high-pressure industrial applications.

Specifications

Diameter	1-1/4 in
Length	100 ft
Working pressure	90 PSI
Temperature range	23F to 149F (-5C to 65C)
Material	Flexible PVC with high tensile polyester reinforcement
Fittings	Aluminum pin lug fittings

Our Verdict

The 1-1/4 in x 100 ft Blue PVC Backwash and Discharge Hose is a solid, practical choice for pool owners and service technicians who need a long, reinforced hose that resists chemicals and rolls flat for storage. It offers good value for routine draining, backwash and sump jobs thanks to durable construction and corrosion-resistant fittings, though installers should check connector seals to avoid the occasional leak some users reported.

Frequently Asked Questions

Will this hose work with a typical trash pump?
Yes, the 1-1/4 in diameter and included aluminum pin lug fittings are compatible with many sump and trash pumps, and customers report it works well with trash pumps.

How does the hose store when not in use?
The flat design allows the hose to be easily rolled up and stored in a dry place out of direct sunlight to prolong life.

Is it resistant to pool chemicals?
The PVC construction and fittings are designed to resist oils, grease, acids and many chemicals commonly encountered in pool maintenance.