14 Inch 72 Tooth Industrial Steel and Ferrous Metal Saw Blade

In this review the 14 in 72 Tooth Industrial Level Steel and Ferrous Metal Saw Blade is assessed for shop and trade use; its biggest selling point is dependable cutting performance on low rpm metal saws thanks to a C6 grade carbide tip that resists wear. The reviewer found it best suited to users who run Evolution S355CPSL, DEWALT DW872 or similar low rpm metal cutters and need a blade that delivers clean, low-burr cuts with minimal heat generation. The included electrophoretic coating and mixed ceramic/metal tip composition are highlighted as the main reasons to consider this blade.

Key Features

• C6 grade carbide tip: provides hard-wearing cutting edges that maintain sharpness longer when cutting steel and ferrous metal.
• 72 tooth count: yields smoother, lower-burr cuts ideal for finish work and situations where minimal secondary filing is preferred.
• Ceramic and metal tip materials: combine to resist abrasion and extend blade life under typical low rpm metal cutting conditions.
• Electrophoretic coating: reduces rust and corrosion when the blade is stored in humid shop environments.
• Low rpm compatible: optimized for saws running around 1300 to 1500 RPM, including common metal cutting saw models.
• Quality guarantee: backed by a 30-day satisfaction guarantee to allow testing in real shop conditions.

Who It's For

This blade suits tradespeople, fabricators, and hobbyists who cut steel and other ferrous metals on low rpm metal cutting saws and who prioritize clean, low-burr cuts over extremely long life. It is a practical choice for jobs where heat control and finish quality matter, such as cutting thin-wall tubing, angle iron, or sheet metal for assembly and fitting.

It is less well suited to high-volume production environments that demand extended life across thousands of cuts without blade changes; some customers reported the blade dulls after a few dozen cuts, so very heavy users should consider higher-spec industrial blades or plan for replacement frequency accordingly.

Pros & Cons

Pros

• Delivers consistently smooth, low-burr cuts on steel and ferrous metal thanks to the 72 tooth layout and carbide tip.
• Low heat generation in use reduces warping and improves cut quality on thin parts.
• Electrophoretic coating helps protect the blade from rust during storage, maintaining performance between uses.

Cons

• Durability is mixed in user reports; several users experienced noticeable dulling after a few dozen cuts under shop conditions.

Specifications

Diameter	14 in
Teeth	72
Arbor	1 in
Tip material	C6 grade carbide; ceramic and metal tip composition
Coating	Electrophoretic coating for rust and corrosion resistance
Recommended RPM	1300 - 1500 (low rpm metal cutting saws)
Compatibility	Evolution S355CPSL, DEWALT DW872, Slugger MCCS14, MK Morse CSM14MB (and similar)

Our Verdict

The 14 in 72 Tooth Industrial saw blade is a solid midrange choice for users who need clean, low-burr cuts on steel and ferrous metal with low heat generation. It offers good value for occasional to moderate shop use and includes protective coating and a satisfaction guarantee, but heavy-production shops should expect to replace blades more frequently due to mixed reports on long-term durability.

Frequently Asked Questions

Will this blade fit a 1 in arbor saw?
Yes, the blade is designed for a 1 in arbor and is compatible with the listed low rpm metal cutting saws.

Can it cut stainless steel?
The blade is intended for steel and ferrous metals; stainless steel may be cut but will depend on material thickness and feed rate-expect increased wear when cutting harder stainless alloys.

Is the coating effective at preventing rust?
The electrophoretic coating reduces rust and corrosion during storage, helping preserve cutting performance between uses.