#14 Metal Roofing Screws 1-1/2in Antique Bronze - Durable Roof

In this review of the #14 Metal Roofing Screws 1-1/2in in Antique Bronze, the bottom line is simple: these screws are aimed at homeowners and builders who need a reliable, color-matched fastener for attaching metal roofing to wood. The single biggest reason to buy is their combination of a painted polyurethane head and a galvanized shaft, which delivers a neat visual match and basic corrosion resistance for roof projects from porches to pole barns. The review covers fit, finish, usefulness, and realistic limits based on customer feedback.

Key Features

• Hex washer head: The 5/16in hex washer head gives good grip for power drivers and helps set the screw flush without cam-out.
• EPDM washer: The ~9/16in EPDM washer creates a weather seal between the screw head and the metal panel to reduce leaks when installed correctly.
• Correct length: At 1-1/2in under the head, the shaft is sized for fastening typical corrugated metal panels to wood framing without excessive protrusion.
• #14 shaft: The.242in (#14) shaft provides a heavier gauge than smaller roofing screws, improving shear strength for exposed roof runs.
• Painted head: The polyurethane coated head is painted to closely match many metal roofing finishes for a cleaner installed appearance.
• Self starting point: The sharp T17 point is designed to self start and tap into wood quickly, speeding installation when conditions are suitable.

Who It's For

These screws are best for homeowners, contractors, and builders installing corrugated or other sheet metal roofing to wood structures such as houses, sheds, pole barns, porches, or hangars who want a colored head that blends with the panel. The size and washer make them appropriate when a 1-1/2in penetration into wood is desired and a larger #14 shaft is preferred for strength.

Those who need stainless steel or higher-grade coated fasteners for severe coastal exposure, or who are fastening to metal purlins rather than wood, should look elsewhere. Also, if a precise factory color match is essential, paint shade can vary so test samples first.

Pros & Cons

Pros

• Well finished painted head delivers a tidy installed look that blends with many metal panels.
• Galvanized shaft provides basic corrosion resistance suitable for most non-marine applications.
• Sharp T17 point and hex washer head make for relatively fast and secure installation into wood.
• EPDM washer helps create a reliable weather seal when seated properly.

Cons

• Some users report mixed performance on self-tapping ability and long-term rust prevention, so performance can vary with environment and installation technique.
• Painted polyurethane head color may vary and is not a guaranteed exact match to every metal roof finish.

Specifications

Head type	5/16in hex washer head
Washer	~9/16in EPDM washer
Shaft diameter	.242in (#14)
Length under head	1-1/2in
Point type	Sharp T17 self starting point
Coating	Polyurethane painted head, galvanized shaft
Quantity per pack	250 screws

Our Verdict

These #14 Metal Roofing Screws in Antique Bronze offer a practical balance of appearance and function for typical wood-to-metal roofing projects. They represent good value for homeowners and builders who need a color-matched head, solid shaft strength, and an EPDM seal; however, those in highly corrosive environments or requiring exact color matching should consider higher-grade or specialty fasteners.

Frequently Asked Questions

Are these screws suitable for corrugated metal roofing?
Yes, they are intended for corrugated and sheet metal roofing attached to wood and include an EPDM washer to help seal the penetration.

Will the painted head rust quickly?
The shaft is galvanized for corrosion resistance and the head has a polyurethane paint, but customer reports are mixed on long-term rust prevention in harsh environments.

Can these screws tap into wood without predrilling?
The sharp T17 point is designed to be self starting for wood, though performance depends on wood density and driver torque.