17.5V AC Power Adapter for Behringer XENYX-1202 and UB1202

In this review of the 17.5V AC Power Adapter from solsinsy the bottom line is simple: it is a practical replacement power supply for Behringer mixers that use a 3-pin DIN AC feed. The reviewer found it best for home studios and gigging musicians who need a reliable, direct replacement for a lost or damaged adapter rather than an original factory unit. The single biggest reason to buy is straightforward compatibility and safety features - it delivers the required 17.5VAC at up to 500mA while including overload, thermal and short-circuit protections that reduce risk to the mixer.

Key Features

• Compatibility: Designed to match models using a 3-pin DIN port such as Behringer MXUL5, UB1202 and XENYX-1202 so it fits common Eurorack mixer applications.
• Output rating: Supplies 17.5VAC at up to 500mA (20VA), providing the correct alternating current spec required by the listed mixers.
• Connector design: 3-pin DIN wiring with pins 1 and 3 at 14.8V and pin 2 as ground, which offers wide adaptability across different mixer revisions.
• Cable length: A combined cable run of about 10.4ft (3.9ft + 6.5ft) gives flexible placement options on stages or in home studios.
• Safety protections: Built-in OVP, OCP and SCP plus automatic thermal and overload cut-off protect both adapter and connected equipment.
• Durability: Firmly designed wiring resists pull-out and breakage during regular use and shipping, making it practical for mobile setups.

Who It's For

This adapter is aimed at musicians, home studio owners and live sound techs who already own a compatible Behringer mixer and need a dependable replacement power supply. It is especially useful when the original adapter is lost or damaged and you require a unit that reproduces the correct AC characteristics to avoid hum or power issues.

It is not for users who require an original factory-branded PSU; this is a replacement third-party adapter. Also, anyone whose mixer uses a different voltage, connector type or DC input should look elsewhere to avoid compatibility problems.

Pros & Cons

Pros

• Provides the correct 17.5VAC 500mA output expected by the listed Behringer mixers, avoiding underpowered operation.
• Long combined cable length gives placement flexibility without adding extension cords.
• Multiple built-in protections (OVP, OCP, SCP, thermal and overload cut-off) increase operational safety.
• Sturdy wiring and connector reduce risk of failure from handling or during shipping.

Cons

• Replacement unit only, not an original Behringer-branded adapter, which may matter to some buyers.
• Limited to 110V-120VAC input at 60Hz, so it is not suitable for regions with different mains standards without a converter.

Specifications

Product type	Replacement AC power adapter
Output	17.5VAC 500mA (20VA)
Input	110V-120VAC @ 60Hz
Connector	3-pin DIN (pins 1 & 3 = 14.8V, pin 2 = GND)
Cable length	3.9ft + 6.5ft (total 10.4ft)
Protections	OVP, OCP, SCP, automatic thermal and overload cut-off

Our Verdict

The solsinsy 17.5V AC adapter is a sensible, cost-effective replacement for compatible Behringer mixers when the original PSU is unavailable. With the correct AC output, robust safety protections and a long cable run it offers good value for home studios and gig rigs, provided you confirm model and regional voltage compatibility before buying.

Frequently Asked Questions

Will this adapter work with my XENYX-1202?
Yes if your mixer uses a 3-pin DIN AC input and expects approximately 17.5VAC; always check the model number and connector type against the listing.

Is this an original Behringer part?
No, this is a third-party replacement adapter and not an original factory-branded power supply.

Can I use this outside 110-120VAC regions?
No, the adapter is specified for 110V-120VAC at 60Hz; using it on other mains without a proper converter is not recommended.