2 Gallon 3UV Resistant Resin Kit - Clear Epoxy for Coating & Casting

In this review of the 2 Gallon 3UV Resistant Resin Kit the bottom line is simple: it is a practical, easy-to-use epoxy package for makers who want a fast-curing, ultra-clear finish. The kit includes one gallon of UV resistant resin, one gallon of UV resistant hardener and two pumps, and when mixed 1:1 by volume it cures quickly within 8-24 hours. For hobbyists and small workshop pros this kit stands out for its high gloss, low yellowing and built-in defoamer that noticeably reduces bubbles during pours.

Key Features

• Easy 1:1 mix: The resin and hardener meter by volume with the included pumps, making accurate mixing simple for beginners.
• Faster cure: The formula becomes scratch resistant within about 40 minutes and fully cures in 8-24 hours under normal conditions.
• 3UV resistant clarity: Raw materials were chosen for long-lasting, glass-like transparency that resists yellowing over time.
• No bubbles at all: A defoamer has been added to minimize air bubbles and clear bubbles can dissipate within about an hour when poured in thin layers.
• Heat and hardness: The cured resin is hard and heat resistant up to about 203F (95C), suitable for coasters, tabletops and bar tops.
• Beginner friendly: The kit is non-toxic, low odor and designed to work well in silicone molds and flat pours for DIY projects.

Who It's For

This kit is best for woodworkers making river tables, crafters casting small items like jewelry and coasters, and hobbyists who want a glossy, professional-looking finish without advanced equipment. The included pumps and 1:1 ratio streamline the process for those new to epoxy and for makers who want repeatable results.

It is less appropriate for very large commercial pours or thick castings that exceed the recommended 1/4 in per layer without special setup, and users in cold environments should prewarm the components to ensure optimum curing and finish.

Pros & Cons

Pros

• High gloss, ultra-clear finish that resists yellowing for long-term appearance.
• Built-in defoamer and recommended thin layers greatly reduce bubble problems.
• Simple 1:1 mixing with pumps makes the kit accessible to beginners.
• Quick working time and relatively fast cure for rapid project turnover.

Cons

• Recommended layer thickness is limited to about 1/4 in, so large or deep castings require multiple pours or a different product.
• Cold temperatures require prewarming components to avoid slower cure and surface issues.

Specifications

Product type	Epoxy resin kit for coating and casting
Package size	2 gallons (1 gal resin + 1 gal hardener)
Mix ratio	1:1 by volume
Working time	About 40 minutes
Cure time	Approximately 8-24 hours
Heat resistance	Up to 203F (95C)
Recommended layer	Up to 1/4 in per layer

Our Verdict

The 2 Gallon 3UV Resistant Resin Kit is a solid value for makers seeking an ultra-clear, high-gloss epoxy that cures quickly and minimizes bubbles. It is especially good for river tables, bar tops, coatings and small castings when users follow the 1:1 mix and layer guidelines; those needing very deep pours should consider a cast-specific system. Overall it delivers professional-looking results at a reasonable price for hobbyists and small shops.

Frequently Asked Questions

How do I mix the resin and hardener?
Measure by volume using the two included pumps to achieve the 1:1 ratio, then stir thoroughly before pouring.

Will this yellow over time?
The formulation is 3UV resistant and made from higher-grade raw materials to reduce yellowing compared with typical clear epoxies.

Can I pour thick sections?
Large or deep castings are not recommended in a single pour; the manufacturer suggests no more than about 1/4 in per layer and multiple pours for thicker results.