24V Dimmable LED Driver 192W Triac ELV/MLV Transformer - Smooth

In this review the 24V Dimmable LED Driver 192W is assessed as a robust, installer-friendly power supply for low voltage LED projects. It is best for homeowners, electricians and lighting installers who need a high-wattage, triac-compatible driver for long 24V LED strips or multiple LED modules and want reliable, flicker-free dimming with Lutron and Leviton wall controls. The single biggest reason to buy is its combination of broad compatibility and heavy-duty protection, which delivers consistent dimming performance without buzzing or heat issues.

Key Features

• Triac ELV/MLV compatibility: Works with Lutron and Leviton dimmers so you can integrate smooth wall-dimmer control into existing lighting circuits.
• High output power: 192W at 24V supports long runs of 24V LED strip or multiple LED modules without overloading the supply.
• Easy installation: Four side wiring holes and a press-and-pull junction box design let installers connect and secure wiring quickly without separate screws.
• Safety features: Metal housing and built-in protections for short circuit, over load and over temperature reduce fire and damage risk in dry, damp, or wet locations.
• Quiet operation: Cooling and design prevent buzzing and overheating, delivering stable, flicker-free dimming at low light levels.

Who It's For

This driver is ideal for residential and commercial lighting projects that require a dependable 24V supply with smooth dimming, such as under-cabinet lighting, coves, display lighting, or long LED strip installations. Installers who use Lutron or Leviton dimmers will appreciate the ELV/MLV triac compatibility and the absence of audible noise during operation.

It is less suitable for ultra-compact fixtures where absolute minimum enclosure size is critical, or for projects needing programmable smart dimming protocols not based on triac dimmers. Buyers seeking addressable or digital LED drivers should look elsewhere.

Pros & Cons

Pros

• Wide compatibility with popular Lutron and Leviton dimmers provides flexible control options.
• Solid 192W output at 24V covers long LED strip runs and multiple modules in one supply.
• Built-in protections and metal case make it a safe choice for varied locations.
• Compact footprint and easy press-and-pull junction box simplify installation.

Cons

• Not intended for digital or addressable LED protocols; limited to triac ELV/MLV dimming methods.
• Size and power rating may be overkill for very small, low-wattage single fixtures.

Specifications

Output Voltage	24V
Maximum Power	192W
Dimming Type	Triac ELV/MLV compatible
Protection	Short circuit, over load, over temperature
Listings	UL, cUL, Class 2, Class P, Type HL, FCC compliant
Installation	Press-and-pull junction box with four side wiring holes

Our Verdict

The 24V 192W dimmable LED driver is a practical, cost-effective choice for anyone installing long runs of 24V LED strip or multiple LED modules who needs reliable, flicker-free dimming with Lutron or Leviton wall controls. Its safety features, quiet operation and easy installation deliver clear value for residential and light-commercial projects where triac dimming is required.

Frequently Asked Questions

Will this work with Lutron and Leviton dimmers?
Yes. The driver is specified as ELV/MLV triac compatible and tested to work with common Lutron and Leviton wall dimmers.

Can it be used outdoors?
The metal case and protections allow use in dry, damp, and wet locations as specified, but always follow local electrical codes for outdoor installations and enclosure requirements.

How do I wire and install it?
Open the junction box, connect corresponding wires using the provided wiring holes on the four sides, then secure the box by pressing the cover into place without extra screws; refer to the wiring diagram supplied with the unit.