Skip to product information
1 of 1

3/0 Gauge AWG 125 ft Black Flexible Pure Copper Welding Cable - Heavy

3/0 Gauge AWG 125 ft Black Flexible Pure Copper Welding Cable - Heavy

Regular price $773.07 USD

Price subject to change. Tap below for current.

In this review the TEMCo 3/0 Gauge 125 ft welding cable is judged on flexibility, durability and electrical capacity for heavy duty DC use. The bottom line: this cable is aimed at DIYers and tradespeople who need a long, flexible, pure copper lead for welding, battery banks, solar and vehicle power where a rugged jacket and high amp handling matter. The single biggest reason to buy is the combination of a highly flexible annealed OFC conductor and a tough EPDM jacket that stands up to heat, oil and abrasion while carrying substantial current.

Key Features

  • 380 Max Amps (up to 50 ft): Handles heavy charging and short-run welding tasks without excessive heating when used within recommended lengths.
  • Rated up to 600 volts: Suitable for a wide range of DC systems including battery banks, inverters and solar arrays where higher voltage tolerance is needed.
  • Extreme temperature range: Rated from -58F to +221F so it remains flexible and reliable in cold starts and hot engine compartments.
  • Annealed 30 gauge OFC conductor: Oxygen free copper stranding provides consistent conductivity and improved corrosion resistance for long-term connections.
  • Rugged EPDM jacket: The rubber casing resists cuts, tears, abrasion, water, oil, grease and flame for harsh environments.
  • High strand count: 1547/30 stranding yields exceptional flexibility that makes routing and handling easier than stiff solid or low-strand cables.

Who It's For

This cable suits mechanics, welders and installers who need a long, flexible conductor for battery cables, jumper leads, welding leads and DC runs in cars, trucks, RVs and solar installations. It is particularly useful where routing through tight spaces or around engine bays requires a rubber-sheathed, pliable cable.

Those who need extremely long runs above the 50 ft range for full 380 amp capacity should plan for voltage drop or move to a larger gauge; likewise, if you require a specialized insulating material beyond EPDM for niche chemical exposure, check compatibility before buying.

Pros & Cons

Pros

  • Pure annealed OFC construction gives dependable conductivity and corrosion resistance for battery and audio use.
  • EPDM jacket and 1547/30 stranding produce exceptional flexibility and abrasion resistance for tough installations.
  • Wide temperature and 600 V rating make it versatile across automotive, solar and inverter systems.

Cons

  • 380 amp rating applies up to about 50 ft; expect lower safe current capacity on longer runs due to voltage drop.
  • Nominal OD of 0.621 in is bulky for very tight conduit or low-clearance routing scenarios.

Specifications

Gauge 3/0 AWG
Length 125 ft
Max current 380 amps (up to 50 ft)
Voltage rating Up to 600 volts
Temperature range -58F to +221F (-50C to +105C)
Conductor Annealed 30 gauge oxygen free copper, 1547/30 stranding
Nominal outside diameter 0.621 in (15.77 mm)

Our Verdict

The TEMCo 3/0 125 ft welding cable is a solid value for people needing a long, flexible pure copper lead that resists heat, oil and abrasion. It shines in battery, solar and vehicle applications where pliability and durability matter, and it provides a reliable current capacity for typical short welding and heavy DC runs. Buyers who require maximum capacity on much longer runs should size up, but for most installers this cable delivers performance and toughness at a reasonable cost.

Frequently Asked Questions

Can this cable be used for battery cables in cars and trucks?
Yes, the annealed oxygen free copper conductor and EPDM jacket make it well suited for battery and starter cable use in automotive and diesel applications.

How flexible is the cable for routing through tight spaces?
The 1547/30 stranding and rubber EPDM jacket provide high flexibility for routing through tight areas and around engine components.

What limitations should I expect on long runs?
The 380 amp rating applies up to about 50 ft; for longer runs expect voltage drop and reduced safe current, so consider a larger gauge for sustained high current at long distance.

Editor's Take

GearMustHave editorial rating: 4.7 out of 5. GearMustHave Editorial Rating

The TEMCo 3/0 125 ft welding cable is a durable, highly flexible pure copper lead ideal for battery, solar and vehicle applications; it offers strong performance for short heavy-duty runs though longer runs need larger gauge due to voltage drop.

View full details
3/0 Gauge AWG 125 ft Black Flexible Pure Copper Welding Cable - Heavy
3/0 Gauge AWG 125 ft Black Flexible Pure Copper Welding Cable - Heavy
Regular price $773.07 USD
CHECK AVAILABILITY ➤

Recently viewed