5/8 in x 3000 ft Detectable Polyester Pull Tape - Low Elongation, USA

In this review of the 5/8 in x 3000 ft detectable polyester pull tape the bottom line is simple: this is a workhorse pull tape for electricians and tradespeople who need a strong, low-elongation line that is safe to locate after installation. The tape is 100% polyester and made in the USA, and the reviewer found the pre-lubrication and sequential footage printing to be the single biggest practical advantages during long conduit pulls, where reduced friction and clear length markers make routing and locating cable runs easier and less stressful.

Key Features

• 100% Polyester: Provides a durable core with low elongation so cable runs stay true and predictable under tension.
• Made in USA: Assures consistent manufacture and quality control for trade use and repeated pulls.
• Pre-lubricated surface: Reduces friction and helps prevent duct cutting on tight or long pulls, preserving both tape and conduit.
• Sequential footage printing: Printed marks let users monitor how much tape has been pulled and help locate cables later.
• 22 gauge coated copper wire: Detectable single wire runs through the tape so buried or concealed runs can be found with a locator.
• Sturdy plastic reels: The tape ships on durable reels that stand up to jobsite handling and make rewinding simple.

Who It's For

Electricians, telecom installers, and contractors who perform long conduit pulls or need a detectable pull line will get the most from this tape. The combination of low elongation and sequential footage printing is especially useful on long runs where accurate measurement and reduced stretch are important.

Hobbyists and occasional users can use it too, but those who only need short, lightweight pulls might prefer a simpler, less expensive option. If you need a multiwire detection system or a thicker detect wire, look for products that specify multiple conductors or higher gauge options.

Pros & Cons

Pros

• High tensile polyester construction gives reliable strength for long pulls and repeated use.
• Pre-lubricated finish cuts friction and helps protect conduit during demanding installs.
• Sequential footage printing and a single coated copper wire make locating and measuring straightforward.
• Packaged on sturdy reels that hold up on job sites and make deployment easy.

Cons

• Tie strength is a mixed point for some users; knots can hold well but may work loose if not secured properly.
• Single 22 gauge wire offers basic detectability but may not suit every locating system or preference for heavier conductors.

Specifications

Material	100% Polyester
Length	3000 ft
Width	5/8 in
Detectable Wire	22 gauge coated copper, single wire
Finish	Pre-lubricated
Packaging	Sturdy plastic reel
Origin	Made in USA

Our Verdict

This pull tape is a practical, value-oriented choice for professionals who need a durable, low-elongation line with built-in detectability and clear footage marking. It performs well on long conduit pulls, reduces friction, and is packaged for jobsite use, making it a sensible buy for most installers who want reliable, American-made pull webbing.

Frequently Asked Questions

Is the tape easy to detect with a locator?
Yes, the included 22 gauge coated copper single wire is intended to be detectable with standard locators for cable locating.

Will the pre-lubrication harm conduit or cables?
No, the pre-lubricated surface is formulated to reduce friction and help prevent duct cutting during pulls rather than cause damage.

Does the footage printing make it simple to measure runs?
Yes, sequential footage printing allows users to monitor how much tape has been pulled and helps when documenting or locating runs later.