75Meters LC/UPC to SC/UPC Single-Mode OS2 Fiber Patch Cord - 246ft

Our review of the 75Meters LC/UPC to SC/UPC single-mode OS2 fiber patch cord finds it best suited for installers and network engineers who need a long, reliable indoor jumper for GPON, FTTX or LAN links. The single biggest reason to buy is its consistent OS2 performance over a lengthy 75 m (246 ft) run, with factory testing and low attenuation characteristics that make it a dependable choice when connecting patch panels to network or server equipment.

Key Features

• 75 m length: Provides a single continuous run of fiber ideal for long racks or between rooms without splices or adapters.
• LC/UPC to SC/UPC connectors: Offers compatibility with common patch panels and equipment ports used in data centers and telecom closets.
• OS2 single-mode fiber: Designed for regional, metro and FTTH use and is backward compatible with legacy single-mode installations.
• Low attenuation: Typical loss figures of 0.25 dB/km at 1550 nm and 0.35 dB/km at 1310 nm help preserve signal quality over distance.
• Flexible 3.0 mm jacket: Soft PVC cover and a 3.0 mm diameter jacket make routing and dressing in tight spaces easier, with a minimum installation bend radius of 5.0 cm.
• Factory tested: Each cable is tested for insertion loss and quality control so installers receive a verified jumper.

Who It's For

This cable is aimed at network technicians, system integrators and small to medium IT teams that need a long single-mode jumper for indoor connections such as GPON splits, FTTH point-to-point links, and intra-building backbone runs. The 75 m length removes the need for inline splicing in many installations and suits environments where a flexible, unarmored indoor cable is acceptable.

Those who need outdoor-rated, armored, or extremely ruggedized long-haul cabling should look elsewhere; the soft PVC jacket and indoor-oriented design make this jumper less appropriate for direct burial or harsh-weather exterior paths.

Pros & Cons

Pros

• Long 75 m length reduces splices and simplifies routing between rooms or equipment areas.
• Standard LC/UPC and SC/UPC connectors ensure broad compatibility with patch panels and active gear.
• Low attenuation and OS2 construction support metro and FTTH applications with backward compatibility.
• Factory testing provides reassurance on insertion loss and quality.

Cons

• The soft PVC 3.0 mm jacket is intended for indoor use and is not armored for outdoor or high-abrasion installations.
• Limited temperature tolerance for extreme outdoor conditions compared with purpose-built outdoor cables.

Specifications

Our Verdict

The 75 m LC/UPC to SC/UPC OS2 patch cord is a practical, cost-effective jumper for indoor telecom and network installations that require a long, tested single-mode link. Its low attenuation, standard connectors and factory testing make it a solid choice for GPON, FTTH and LAN connections, but users needing outdoor durability should choose an armored or outdoor-rated alternative.

Frequently Asked Questions

Is this cable suitable for outdoor installation?
No. The soft PVC jacket and indoor design mean it is intended for indoor use; for outdoor or direct burial runs an armored or outdoor-rated cable is recommended.

What applications does OS2 support?
OS2 single-mode fiber is suitable for regional, long-haul, metro, access, mobile and fiber to the home applications and is backward compatible with legacy single-mode fibers.

Are these cables tested before shipping?
Yes. Each cable is factory tested to meet quality control and insertion loss requirements to ensure reliable performance.