#8 1-5/8ft Deck Screws 2833pcs - Rust Resistant Exterior Wood Screws

In this review of the #8 1-5/8' deck screws (2833pcs), the bottom line is simple: these screws are aimed at contractors and serious DIYers who need a large quantity of durable exterior fasteners that resist corrosion and drive reliably. The single biggest reason to buy is the combination of a multi-layer anti-corrosion coating and a heat-treated steel body that makes these screws a practical choice for outdoor wood projects where long-term durability matters. Reviewers found them strong and good value, with a few notes about initial starting effort on some woods.

Key Features

• Anti-corrosion coating: Four layers of high-performance epoxy coating provide better resistance to rust in outdoor construction, so fasteners last longer in exposed conditions.
• Serrated threads: Serrated threads reduce plate separation and increase joint strength, delivering a more secure hold in timber connections.
• Plummer head Star drive: The star drive with plummer head makes alignment and driving easier and helps prevent cam-out during installation.
• Dampening knurled shoulder: Six non-slip bars under the head improve torque transfer for faster, more secure installation and reduce slippage of the driver bit.
• Type 26 slot tip: An extra sharp tip is designed to eliminate the need for pre-drilling in many applications, helping to reduce splitting in wood.

Who It's For

These screws are best for deck builders, fence installers, and homeowners tackling large exterior wood projects who need a high-volume pack and corrosion resistance. The heat-treated steel and coated finish suit pressure-treated lumber and outdoor framing where long-term exposure to moisture is expected.

Those who should look elsewhere include users who only need a few fasteners for occasional indoor projects or who require specialized stainless steel or coated fasteners certified for coastal saltwater conditions. Also consider shorter packs if you do not want to store large quantities.

Pros & Cons

Pros

• Durable anti-corrosion coating extends life of fasteners in outdoor use.
• Serrated threads and sharp Type 26 tip give strong hold and often remove the need for pre-drilling.
• Large 2833pcs pack offers very good value per screw for big jobs.
• Plummer head Star drive and knurled shoulder improve driving control and reduce cam-out.

Cons

• Some users report the screws can be tough to start in very dense hardwoods despite the sharp tip.
• Not stainless steel, so extreme coastal salt exposure may still cause eventual corrosion.

Specifications

Size	#8, 1-5/8' length
Quantity	2833 pieces (15 lbs pack)
Finish	Bronze epoxy multi-layer anti-corrosion coating
Drive type	T20 Star drive with plummer head
Thread / Tip	Serrated threads with Type 26 extra sharp tip
Material	Heat-treated steel

Our Verdict

For large exterior wood projects these screws represent strong value: the heat-treated steel and four-layer epoxy coating deliver lasting durability, while serrated threads and the sharp Type 26 tip provide secure fastening and often avoid pre-drilling. Buy this pack if you need quantity and corrosion resistance for decks, fences, or framing; choose a different fastener if you require stainless-grade hardware for coastal salt conditions.

Frequently Asked Questions

Do these screws need pre-drilling?
In many cases no; the Type 26 extra sharp tip is designed to penetrate without pre-drilling, though very dense hardwoods may still benefit from pilot holes.

Are these suitable for pressure-treated lumber?
Yes, the epoxy multi-layer anti-corrosion coating and heat-treated steel construction make them suitable for pressure-treated lumber and general exterior use.

What driver bit is required?
These use a T20 Star drive; a matching T20 bit or driver head is recommended for best fit and to reduce stripping.