87mm PLA09215S12H 12V 0.55A 4Pin Graphics Card Fans - EVGA XC3 Fit

In this review of the 87mm PLA09215S12H replacement fans, the bottom line is straightforward: these are a focused, budget-friendly option for owners of specific EVGA XC3 series GPUs who need like-for-like fan replacements. The reviewer found they match the stated dimensions and connector type and are best chosen after careful measurement; this is a parts replacement rather than a full cooler. If you need three identical 87mm, 4-pin, 12V fans for an EVGA RTX 3070/3080/3090 XC3 variant, this set delivers functional cooling without extras, but buyers must supply their own screws and confirm fit first.

Key Features

• Compatibility: Designed specifically to fit EVGA GeForce RTX 3070, 3080 and 3090 XC3 series models when the fan size and mounting pattern match, which helps simplify replacements for those cards.
• Standard connector: Uses a 4-pin header so the fans support PWM control on compatible GPU fan headers, allowing the card to regulate speed automatically.
• Compact size: At approximately 87x87x12mm each, the fans provide the same physical profile as many XC3 series fans, making them suitable for direct swaps when dimensions match.
• Electrical rating: Rated at DC 12V and 0.55A, the fans run on a common GPU fan voltage and current envelope, which keeps power demands predictable.
• Sold as a set: Supplied as a full set of three fans, which is convenient for cards that use three identical fans and eliminates the need to source single units.

Who It's For

These replacement fans are best for PC builders and GPU owners who already know their card uses 87mm fans with a 4-pin header and need to restore or replace worn or noisy fans on EVGA XC3 RTX 3070, 3080 or 3090 variants. Technically minded users who can open a GPU shroud and confirm mounting hole spacing will appreciate the straightforward swap-in nature of the set.

Not everyone should buy these: they are not a full cooling assembly and do not include heatsinks, brackets or mounting screws, so casual users who want a plug-and-play, guaranteed fit solution without disassembly may prefer to seek a motherboard or dealer service. Also, do not rely on model name alone; measure your current fan before ordering.

Pros & Cons

Pros

• Direct replacement size and 4-pin PWM connector make these practical for matching XC3 fan specs.
• Sold as a complete three-piece set so all fans on a triple-fan card can be replaced at once.
• Reasonable electrical rating at 12V and 0.55A for typical GPU fan loads.
• Simple, no-frills design reduces cost compared with branded OEM modules.

Cons

• Does not include mounting screws, heatsink or other hardware, so buyers must already have or source fasteners.
• Fit is not guaranteed by GPU model alone; buyers must measure fan dimensions and mounting hole distance first.

Specifications

Our Verdict

For DIY GPU maintenance these fans offer practical value: they match the common 87mm, 4-pin specification used on several EVGA XC3 cards and are sold as a three-piece set so an entire triple-fan array can be renewed. They are a sensible, lower-cost choice if you can confirm fitment and provide your own screws, but not a substitute for a full cooler or professional repair service.

Frequently Asked Questions

Will these fans fit my EVGA XC3 GPU?
Measure the fan dimension and mounting hole spacing on your card; compatibility depends on matching the 87 x 87 x 12mm size and mounting pattern rather than GPU model name alone.

Are screws or heatsinks included?
No. The set does not include mounting screws, heatsinks or other hardware, so keep your own screws or source replacements.

Do the fans support PWM speed control?
Yes. The fans use a 4-pin header which supports PWM control when connected to a compatible GPU fan header.