ABS-like 3D Printer Resin 3.0 Black - High Strength, Low Shrinkage

In this review the ELEGOO ABS-like 3D Printer Resin 3.0 is evaluated for makers and small shops that need tougher, functional prints rather than just display models. The single biggest reason to consider this resin is its stated combination of high strength and toughness, which makes it suitable for prototypes and mechanical parts that may be drilled or exposed to modest impacts. The review focuses on dimensional stability, printability on 405nm machines, and how the resin behaves during fast prototyping.

Key Features

• High Strength and Toughness: Prints resist deformation and can tolerate drilling and some impacts, making them useful for functional prototypes and industrial parts.
• High Precision & Low Shrinkage: Lower volume shrinkage improves dimensional accuracy so fine details and smooth surfaces are retained with minimal distortion.
• Good Fluidity for Rapid Prototyping: Lower viscosity speeds return of resin to the print area and eases peeling, which can reduce overall print time and failed layers.
• Strong Stability: The formula resists delamination or separation over time, maintaining consistent color and reducing the need for manual stirring.
• Wide Compatibility: Designed for 405nm LCD/DLP/MSLA printers and works well with ELEGOO light-curing machines as well as many third-party 405nm printers.

Who It's For

The resin is best for hobbyists, engineers, and small workshops that need durable parts with accurate dimensions for fit checks, jigs, or functional prototypes. Users who value faster print cycles and smoother surface finish will benefit from the lower viscosity and reduced shrinkage.

Those who should look elsewhere include modelers who need very flexible or rubber-like materials, and users who require extreme impact resistance where shatter risk must be zero; some customer reports indicate brittle failure modes in certain thin or highly stressed prints.

Pros & Cons

Pros

• High mechanical strength allows drilling and modest impacts without gross deformation.
• Low shrinkage delivers reliable dimensional accuracy and fine detail retention.
• Lower viscosity improves print success rate and can reduce overall print time.
• Good shelf and color stability reduce the need for frequent mixing.

Cons

• Some users report brittle fractures in thin sections, so parts under heavy impact can shatter like glass.
• Color accuracy reports are mixed on third-party printers, so finishing and testing may be required for exact color matching.

Specifications

Brand	ELEGOO
Type	ABS-like 3.0 photopolymer resin
Light source	405nm UV curing (LCD/DLP/MSLA)
Viscosity	Low viscosity (25-47% lower than ABS-like 1.0)
Weight	2000g
Key properties	High strength, high toughness, low shrinkage, strong stability

Our Verdict

ELEGOO ABS-like 3.0 is a practical choice for makers and small shops seeking tougher, dimensionally stable prints on 405nm machines. Its combination of strength, low shrinkage, and good fluidity makes it good value for functional prototypes and mechanical parts, though very thin or highly stressed pieces should be tested for brittleness before critical use.

Frequently Asked Questions

Will this resin work on non-ELEGOO printers?
Yes. It is compatible with a wide range of LCD/DLP/MSLA printers that use 405nm UV curing, though settings may need tuning per machine.

Is this resin suitable for functional parts?
Yes, it is formulated for higher strength and toughness, suitable for functional prototypes and parts that may be drilled or lightly stressed.

Does the resin separate or require stirring?
No. The formula is engineered for strong stability and is less likely to delaminate, reducing the need for manual stirring.